Supply Of Testing Equipments To Modernization Of Central Laboratory - .00 Compaction Factor Apparatus 2.00 Non-Nuclear Asphalt Density Gauge 21.00 Digital Modified Marshall Apparatus 50Kn, Single Speed, New Model For 6” Dia Sample And 4” Dia Sample , Jaipur-Rajasthan

Supply Of Testing Equipments To Modernization Of Central Laboratory - .00 Compaction Factor Apparatus 2.00 Non-Nuclear Asphalt Density Gauge 21.00 Digital Modified Marshall Apparatus 50Kn, Single Speed, New Model For 6” Dia Sample And 4” Dia Sample 1.00 No 0.00 Inr Zero Only 22.00 Solubility Test Apparatus Of Bt ( Complete Set ) 1.00 No 0.00 Inr Zero Only 23.00 Humidity Fire Equipment, Due Humidity Fire With Digital Display Controller 3.00 Water Bath. 4.00 Digital Room Thermometer With Humidity Indicator 1.00 No 0.00 Inr Zero Only 5.00 Refrigerator 300 Litre Capacity 6.00 Canon-Manning Viscosity Tube 7.00 Ductility Testing Machine With Digital Display & Cooling 8.00 Vibrating Table 50 C.M. X 50 C.M 11.00 Micro Controller Based Compression Testing Machine Capacity 3000 Kn With Touch Panel Display And Flexure Testing Attachment 100 Kn 11.01 • Self Aligning Platen With Fast Accessory Change Capability. • Configurable Engineering Unit For Machine Selection. • Predefined Machine Capacities For Each Engineering Unit. Specific Capacity Can Be Selected From The Dropdown Menu. • Flexible Calibration Points. Calibration Can Be Done On5 To 10 Points. • Peak Load, Peak St 11.02 • Password Protection For System & Calibration Setup 12.00 Accelerated Curing Tank Cum Normal Curing Tank For 12 Moulds Of 150Mm Size. 24-Hour Cycle From Time Of Mixing. • Temperature Range : Ambient + 5°C To 65 °C Curing Temperature For Concrete In Lab Environment For Temperature Range - 23+ 20C & Relative Humidity - 50 + 10%The Tank Has Been Designed To Accommodate 150Mm / 70.6 Mm Casted Cubes Upto12 / 36 Cubes And Fully Insulated, Complete With A Hinged Lid, Heater, Thermostat And Recirculation Pump. Provision Of Two Removable Racks Allowing Free Circulation Of Water Around Each Cube. The Pump, Drain Valves And Electrical Equipment Are Housed In A Compartment Located At One End Of The Tank. Ref. Is: 9013-1978 1.00 No 0.00 Inr Zero Only 13.00 Beam Mould Ref Is: 516 13.01 100 Mm X 100 Mm X500 Mm Size 1.00 No 0.00 Inr Zero Only 13.02 150 Mm X 150 Mm X700 Mm Size 1.00 No 0.00 Inr Zero Only 14.00 Capping Gypsum Compressive Strength : 560Kgf / Cm2 ( 56 Mpa Or 8000 Psi ) With Glass Plates. As Per Ref Is: 516 1.00 No 0.00 Inr Zero Only 15.00 Vibrating Table, Table Top 1M X 1M For 16 Moulds Of 150Mm Cube Proper Compaction Of Cement Concrete. The Table Top Is Suitable To Hold Cube Moulds And Has Stops Along Its Edges To Prevent Moulds From Sliding Off The Table During Operation. The Specially Designed Vibro Motor For Operating The Vibrator. Suitable For Operatio 6.00 Centrifuge Extractor, C 17.00 Ring And Ball Apparatus 18.00 Saybolt Viscometer Apparatus 9.00 Universal Penetrometer for LL & BT Penetration 20.00 Automatic Compactor for Bituminous Mixes Of 4’’ And 6’’ Dia Samples Ref. EN 12697-10-30

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	31-03-2022		Prebid Meeting Quarry and Reply	01-04-2022

Refer document

Refer document

INR 56.52 Lakhs /-