|
| 1 | Earthwork in bank trimming to the designed section /slope including removing the soils at a safe distance, complete as directed. |
| 2 | Supply of Geo-textile bags of type-A (size 1.03X0.70M), inner dimension made of Geo-textile non-woven fabric sheetsof 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre having thickness not less than 3.00 mmwith minimum properties as (i) Tensile strength (CD) =24 KN/m (ii) Tensile strength (MD) =22 KN/m (iii) Mass= 400.00 Gm/m ²(iv) CBR Puncture strength = 4100 N/m2(v) Elongation @ break (Warp) = 54% (vi) Elongation @ break (Weft)= 52% (vii) Abrasion = 70 %(viii) UVResistance @ 500 hours= 70% (ix) AOS = 75 micron (x) Permittivity = 1.25, (xi) Trapezoidal Tear Strength = 520 N (xii) Permeability = 45Lt/m2/sec(xiii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material). FOR GUWAHATI. |
| 3 | Carriage of Geo Bags of size 1.03 x 0.70mincluding loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. (Distance to be calculated with respect to FOR Guwahati) |
| 4 | Supply of Geo-textile bags of Type-B (Size 2.00m x 1.50m), inner dimension made of composite layers of geo-textile as per specifications below :Woven Geo-textile for the outer cover. The woven geo textile is woven with UV resistant slit film tape fibre with MAVR values of the following properties. Geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids.? Weight (ISO-9864/ASTMD 5261)=250 Gms/Sqm. ? Tensile strength(MD) ( ASTMD 4595)=35 KN/m? Tensile strength(CD) ( ASTMD 4595)=35 KN/m? Tensile Elongation ( ASTMD 4595)=5% & =30%? Grab Elongation ( ASTMD 4632) =5% & =30%? Tensile strength ( ASTMD 4632) =1.5 KN ? UV resistance( ASTMD 4355)= 70%/500 hrsNon woven Geo-textile for the inner layer It is needle punched non woven geo-textile made of 100% polypropylene staple fibers which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis.? Weight (ISO-9864/ASTMD 5261)=300 Gms/Sqm. ? Tensile strength(MD) ( ASTMD 4595)=12 KN/m? Tensile strength(CD) ( ASTMD 4595)=12 KN/m? Tensile Elongation ( ASTMD 4595) =5% & =30%? Grab Elongation ( ASTMD 4632)=5% & =30%? Tensile strength ( ASTMD 4632) =1.5 KN ? UV resistance( ASTMD 4355)= 70%/500 hrs (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).FOR GUWAHATI |
| 5 | Carriage of Geo Bags of size 2.00 x 1.50mincluding loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. (Distance to be calculated with respect to FOR Guwahati) |
| 6 | Supply of non-woven Geo-textilefabric sheetsof 300 GSM manufactured from 100% virgin Polypropylene (PP) fibrewith minimum properties as (i) Tensile strength =12 KN/m (ii) Mass= 300.00 Gm/m ²(iii) CBR Puncture strength = 3.5 KN(iv) Elongation at break = 60% (v) Abrasion = 70 %(vi) UVResistance @ 500 hours= 70% (vii) AOS = 75 micron (ix) Permittivity = 1.25, (x) Trapezoidal Tear Strength = 340 N (xi) Permeability = 2.00 x 10 ¯ ³m/sec(xii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it andmentioning properly the GSM and type of polymer and Test Certificate from approved NABL accreditedand ISO Certified Laboratory should invariably be submitted against each batch of material). FOR GUWAHATI |
| 7 | Carriage of 300 gsm Geo sheet of including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. (Distance to be calculated with respect to FOR Guwahati) |
| 8 | Supply ofG-Mat in double layered composite Geo-textile fabricated to form a three dimensional mattresses , theupperlayerofthemattressbeingheavilywovenwithpolypropylenefabricneedle-punchedwith amixtureofU.V.stabilizedgreenfibres andcut tape yarns with Upper Layer Properties as 1) Mass per unit area > 650 GSM, 2) Tensile Strength(MD) =70kN/m, 3) Tensile Strength(CD) =70kN/m 4) Tensile Elongation(MD) = 25%, 5) Tensile Elongation(CD) = 25%,6) Pore Size < 0.35mm,7) Abrasion Resistance = 35 %, 8) UV @ 500 hours= 90%9) Resistance to Oxidation @ 100°C for 28 days) = 80%and Lower Layer Properties as 1) Mass per unit area > 400 GSM, 2) Tensile Strength(MD) =110kN/m, 3) Tensile Strength(CD) =90kN/m 4) Tensile Elongation(MD) = 25%, 5) Tensile Elongation(CD) = 25%,6) Pore Size < 0.35mm,7) Abrasion Resistance = 60 %, 8) UV @ 500 hours= 90%9) Resistance to Oxidation @ 100°C for 28 days) = 80%.The sewing threadshould be of hightenacity polyester and parallel stitchesare to be continuedpositioned at350 mmapart with a stitchlengthnotexceeding5 mm. (Each roll of G-Mat should be supplied in properly packed bundle and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it andmentioning properly the GSM( for both upper and lower layer)and types of polymer( for both upper and lower layer) and Test Certificate from approved NABL accreditedand ISO Certified Laboratory should invariably be submitted against each batch of material)FOR GUWAHATI(inclusive of Custom Duty) |
| 9 | Carriage of Geo Matof including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed.(Distance to be calculated with respect to FOR Guwahati) |
| 10 | Labour charge for laying, fitting and fixing of double layered Geo textile, fabricated to form a three dimensional mattresses after filling sand at design slope, filled up with sand by pump, anchoring by cutting trench at the upper and lower end of slope of depth 1.00m x 0.75 m placing the mat by bending it into the trench, filling the trench by earth filled cement bags, sides of mattressesin sloping direction stitched by Polypropylene thread with double locking chain stitch not less than 3 stitches per 2.50 cm to achieve minimum stream strength including all handling and carriage charge complete as directed. (Polypropylene thread will be supplied by the department free of cost). |
| 11 | Supply of Coarse sand for tubular Geo Mattresses filling |
| 12 | Supply of Wire -netting box of size 1.50mx 1.50mx 0.45m made with mechanically woven, double twisted , hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization with an additional layer of PVC coating with mesh type of 10x12 as per EN 10223 & ASTM A975 , mesh wire of 2.70mm (I.D)/3.70mm(OD)tensile strength of 450-500/mm²,edge wire/selvedgearound it at least 2.5 times, lacing wire (zink P.V.C. coated) of 2.20mm (I.D.) /3.20mm (O.D) P.V.C. coating thickness of 0.50mm nominal, 0.38mm minimum and with average weight per unit being 12 kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with Zink coated steel wire of required length as directed, compling with A.S.TM and Europian norms, including payment of all duties,sale tax, any other taxes as applicable loading, unloading and staking them at the site ofwork in measurable stacks, complete as directed . |
| 13 | Labour charge forlaying Geo fabric sheet as filter bellow pitching including anchoring and complete as directed. |
| 14 | Filling and laying of Geo bags of size 1.03m X 0.70m including excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00Kg and minimum volume 0.084 cum after filling, double locking chain stitching the mouth of the filled bags with polypropylenethread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost).With Boat |
| 15 | Filling and laying of Geo bags of size 1.03m X 0.70m excluding excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylenethread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost). Without Boat |
| 16 | Filling and layingin cage with silt filled Geo bags of size 1.03m X 0.70m excluding excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cumafter filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cagesmade of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires completeas directed. (Silt, Geo Bag, Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost). Without boat |
| 17 | Filling and laying of nonwoven Geo-textile bag of dimension 2.00mx1.50m including excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt, having minimum volume 0.612 cum after filling,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, layingat proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost). With Boat |
| 18 | Collection and supply of River silt by truck carriage free from debries and other foreign material payment offorest royalty if any, etc. (For initialLead beyond 1/2Km and upto 4.00 km for all lifts). |
| 19 | Excavation in Ordinary SoilExcavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000mExcavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 |
| 20 | Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon) i/c payment of taxes. |
| 21 | Hire charge of engine boat with minimum 10 HP engine and load carrying capacity of not less than 3.00 ton along with operator and helpers excluding cost of P.O.L. |
| 22 | Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10m X 0.10mX 3.00mwith M-30 grade ofcement concrete conforming to IS 1343 : 2012 using super-plasticizer @1.2 lit/bag of cement with graded broken coarse aggregates up to 20mm size down conforming to IS 10262:2009 & IS 456:2000 and reinforced with 4 Nos. of 4 mm dia high tensile steel wire cable with necessary cover and 4mm high tensile stirrups at 250mm C/C, in conformity with IS-6403:R2002 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia at 50 cm inside from both ends in the same face and in either face of post another 2 Nos. of holes of size 16 mm dia at 65mm inside from both ends including properly curing for 21 (twenty one) days and carriage of porcupine members from factory to the stack yard within a distance up to 20 Km including loading, unloading & stacking complete as directed. (Including forest royalty and all taxes as admissible) |
| 23 | Labour charge for launching of PSC Porcupine includingcarriage of PSC porcupine members of size0.10m × 0.10m × 3.00mfrom the stack yard to the place of launching,erection of the Porcupine with 6 (six) members properly,supply & fitting/fixing with 12 mm dia25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m)A. Without boat. |
| 24 | Labour charge for launching of PSC Porcupine includingcarriage of PSC porcupine members of size0.10m × 0.10m × 3.00mfrom the stack yard to the place of launching,erection of the Porcupine with 6 (six) members properly,supply & fitting/fixing with 12 mm dia25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m)B. With boat. |
