|
| 1 | Supplying,hoisting, fixing, installation, testing and commissioning of High Static split Air Conditioner with corded remote of following capacity all as specified and directed by Engr-in-charge (The MS Cage will be measured and paid separatley) |
| 2 | 11.0TR with R-407C Refrigerant Make:Voltas Model:ACADS11012 Location:Auditorium |
| 3 | 17.0TR with R-410A Refrigerant Make:Diakin Location:Auditorium |
| 4 | 5.5.0TR with R-410A Refrigerant Make:Voltas Model:ACADS05512 R-407C Location:Stage |
| 5 | Supply of refrigerant copper piping with nitrile rubber insulation for suction and discharge for 5.5 TR ductable unit complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply and fixing of Hardrawn refrigerant copper piping with nitrile rubber insulation for suction and discharge for 11/17 TR ductable units complete all as specified and directed by Engr-in-Charge. |
| 7 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 8 | Supply, installation, testing and commisioning of 6 core x 2.5 sqmm shielded copper communication cable for the communication from outdoor toindoor unit for ductable units complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply and fixing of MS Fabricated stand to mount the outdoor with isolation rubber pads and one coat of primier and 1 coat of black paint for 11/17 TR ductable units complete all as specified and directed by Engr-in-Charge. |
| 10 | Supply and fixing of MS Fabricated stand to mount the outdoor with isolation rubber pads and one coat of primier and 1 coat of black Paint for 5.5 TR ductable unit complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply of Refrigerant Gas R-32/R410A all as specifed and directed by Engr-in-Charge. |
| 12 | Supply , assembly and erection of GI sheet with C & SS rectangular/square duct made out of \"L\" shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete of size 26 Gauge. |
| 13 | 24 gauge galvanised sheet |
| 14 | 22 gauge galvanised sheet |
| 15 | Supplyingh and instalation of Aucostic insulation 10mm open cell with tpe and adhesive complete all as specified and directed by Engr-in-Charge |
| 16 | Supply and Installation of thermal insulation on ducts with 9 mm thick Nitrile rubber with cotton tape and adhesive complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for 25mm thick duct insulation with resin bonded fibre glass wool roll of density 24 kg/Cum, with factory laminated aluminium vapour barrier, thickness of insulation as specified and including the following:- (a) M&L for cleaning the duct surface (to be insulated ) by scrapping carefully with wire brush etc. to make the surface completely free of millscale, dirt, dust, grease and other foreign materials, taking special care so that all duct joints are sealed against any leakage.(b) M&L for applying rubber based adhesive CPRX compound. (c) M&L for sealing of all longitudinal joints and circular overlaps with and including Aluminium foil tape 50 mm wide, to make the insulation leakproof.(d) M & L for securing the insulation with and including mechanically fastened nylon/ steel straps of size 12 mm/50 mm at maximum intervals of 1.2 mtr. |
| 18 | Supply & fixing of flexible connections constructed of fire resistant double between machine mouth to main duct canvas sleeve with ip provision complete all as specified and directed by Engr-in-Charge. |
| 19 | Supply and installation of GI Volume Control Dampers of GSS blades, channels, flanges for duct mounting, operationg handle etc complete all as specified and directed by Engr-in-Charge. |
| 20 | Supply & installation of fresh air arragnement with birdmesh, vcd & cowl complete all as specifed and directed by Engr-in-Charge. |
| 21 | Supply of Aluminum powder coated Supply Air Grill with Collar Damper Size:600X600mm complete all as specified and directed by Engr-in-Charge. |
| 22 | Suply of Aluminum powder coated Return Air Grill without Collar Damper Size: 600X600mm complete all as specified and directed by Engr-in-Charge. |
| 23 | Supply of 10\" Flexible duct,Mixing Boxes & Butterfly Dampers with jubilee clamps complete all as specifed and directed by Engr-in-charge. |
| 24 | Air Balancing for Air Terminals of required CFM and all volume control dampers to acheieve the air flow of desired air volume at desired locations as per the client and the consultant. |
| 25 | Dismantling of ceiling boards(fibre, Pulp, insulation etc) or insulation boards/slabs thickness,including cover fillets and re fixed in same position on completion of job as on ceiling |
| 26 | Note: (a) The work will be carried out in Auditorium at the approx height of 9.00m (b) The system should be capable to maintaining inside conditioned air temperature 23+2 degree centigrade and RH 55%+5%.(c) The rate includes Necessary core cutting and tarpaulin between AC duct and evaporator unit |
