Annual Maintenance Of Road Narnaul Bye Pass In Mohindergarh District ( Ch. Am L And A Nizampur Narnaul Road Km. 0 To 13.88 In Mohindergarh District ) . ( Re-Invited ) , Mahendragarh-Haryana
TDR : 31497331
Tender Notice
BOQ
Expired
Mahendragarh
Haryana
Annual Maintenance Of Road Narnaul Bye Pass In Mohindergarh District ( Ch. Am L And A Nizampur Narnaul Road Km. 0 To 13.88 In Mohindergarh District ) . ( Re-Invited )
Name of Work: Annual Maintenance of road Narnaul Bye pass in Mohindergarh District (Ch. A/M L&A Nizampur Narnaul road Km. 0 to 13.88 in Mohindergarh District). (Amt. Rs. 1.00 lakh)
Sl. No.
Item Description
1
Providing and laying 150mm thick granular sub-base Material as per Grading III (Table 400-I of MORT&H 5th revision) mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications (HSR 17.14.1)
2
Providing, laying, spreading and compacting 150mm thick in two layers stone aggregates of specific sizes to water bound macadam (G-II) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specifications (HSR 17.23.3) WBM (53 mm to 22.4 mm)
3
Providing and laying of cement concrete blocks of size 0.450 m x 0.300 m x 0.15 m of cement concrete (C.C) M30 grade and spreading 25 mm thick sand underneath filling joints with sand on existing W.B.M. base as per technical specification clause 1503 (HSR 17.66.1)
4
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than75 tonne per hour, with bituminous binder VG - 10 @ 1.46 kg per sqm, laid with Paver Finisher Mechanical androlling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications. (HSR 17.33.1)
5
Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications. (HSR 17.36.3)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
