Re-Carpeting Of Road From Inox Air Gas To Village Plankhwala. Re-Carpeting Of Road From Inox Air Gas To Village Plankhwala.
Tender Value
25.52 Lakhs
Estimated cost
Bid Submission
25 Mar 2022
0 days left
EMD
45800
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baddi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Re-Carpeting Of Road From Inox Air Gas To Village Plankhwala. Re-Carpeting Of Road From Inox Air Gas To Village Plankhwala.
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means. |
| 2 | Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 |
| 3 | Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm nominal size) curing complete, including cost of centring and shuttering in foundationsplinthand walls etc. |
| 4 | Providing and applying primer coat with Bitumen emulsion (SS-1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of @ 1.00 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 5 | Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paverfinisher equiped with electronic sensor to the required grade, level andalignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, completeas per specificatons and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH |
| 6 | Providing and laying heavy duty precast cement conrete interlocking block pavements having thickness as per draings and Technical specification clause 1504( sub-base of concrete floor to be paid for separtely) .80mm. thick I.S.I. interlockingblocks. |
| 7 | Providing and laying cement concrete 1:2:4 (1 cement:2 sand4 graded stone aggregate 20 mm nominal size) curing complete including cost of centring and shuttering in foundation and plinth complete |
| 8 | Providing and applying tack coat using hot straight run bitumen of grade VG 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler @0.35 Kg / sqm includingcleaning and preparing the existing road surface as per specifications : |
| 9 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregate of specified grading,premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler , transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required grade, level and alingment , rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause no. 509 complete in all respects. |
| 10 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications |
AI Tender Summary
Tender Timeline
Mar 16, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender