|
| 1 | SKY WALKER• DIMENSIONS: - 1720mm (Length) x 630mm (Width) x1750mm.(Height)• SAFE AREA: - 2.7Mtr x 1.6Mtr.• SkyWalker Equipment made from \"C\" class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The main frame pipe is of 80mm NB made from \"C\" Class G.I. Material which is bend at the radius of 250mm.• The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe.• Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle.• The handle frame is of 25mm NB made from \"C\" Class G.I. pipe.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \"C\" class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support.• The footrests made from Aluminum casting material of size 130 X 310 X Smm.• Closing Caps are made up of high quality Fiber reinforcedPlastic material.• The pins used are made up of 0 25mm SAE8620 bright material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball.• The bearings used are \"6205zz\" are permanent lubricated sealed bearing of reputed brand. |
| 2 | LEG PRESS• DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). • SAFE AREA:- 2.8 x 1.4Mtr.• Leg Press equipment made from \"C\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100mm NB made from \"C\" Class G.I. pipe.• The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame.• The bottom support of M.S. round plate of 0250 mm & 10mm thick.• The remaining outer frame is of 32NB made from \"C\" class G.I. pipe.• The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB \"C\" class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness.• Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. • The footrests are made from tasted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate.• The frame of footrests made up of 25 NB \"C\" class G.I. pipe.• Closing Caps are made up of high quality Fiber reinforcedPlastic material.• To build structure bushes are used which are made from M . S . seamless pipe of 50mm O.D. and 5mm thickness. |
| 3 | ROWER• DIMENSIONS: - 1200mm (Length) x 1000mm (Width) x 920mm. (Height)• SAFE AREA: - 1.5Mtr. x 1.5Mtr.• Rower Equipment made from \"C\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The Main frame is of 80NB \"C\" class G.L. Pipe welded with M.S. round plate of 250mmX1Omm.• The handle frame 2 5 N B is made from \"C\" class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \"C\" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• To join the movement frame to main frame connecting links made up from 32 NB G.1. \"C\" class pipe.• The seat fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.• Pins used of Diameter 17mm are made up from SAE 8620bright material.• The bearings used are of \"6203zz\" permanent lubricatedsealed bearing of reputed brand.• High tensile steel with galvanized nuts and bolts are used for assembly.• The P.U. bushes (Stopper) used to avoid the collision.• The circlips used for assembly is of A 16• The powder coating done with Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. |
| 4 | CROSS TRAINER• DIMENSIONS: - 1320mm (Length) x 600mm (Width) x1750mm. (Height).• SAFE AREA: - 1.77 x 1.2Mtr.• Cross trainer equipment made from \"C\" Class G.I. Pipe of different N B. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The main frame Pipes are of 80NB \"C\" Class G.I. Pipe with single bend pipe with 250mm radius.• The bottom support of M.S. round plate of 0250 mm & 10mm thick.• The Handle Frame is made up of 25NB \"C\" Class G.I. Pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB\"C\" class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• To build structure bushes are used which are made from M . S . seamless pipe of 60mm OD. With 5 mm thickness.• The footrests a r e made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick • Closing Caps are made up of high quality Fiber reinforced Plastic material• Pins used o f Diameter 35mm, 25mm, and 17mm are made upfrom SAE 8620 bright .• T h e Bearings used are of \"6007zz\" \"6205zz\" and \"6203zz\" permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nuts and bolts are used for assembly.• T h e powder coating is done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness. |
| 5 | POMMEL HORSE• DIMENSIONS: - 2150mm (Length) x 800mm (Width) x800mm. (Height). • SAFE AREA: - 5Mtr x 3.5Mtr.• Pommel horse equipment made from \"C\" Class G.I. pipe ofdifferent NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The main frame of 80NB and 5ONB made from \"C\" Class G.I. pipe.• The handle frame is of 32NB made from \"C\" Class G.I. pipe.• 40mm x 40mm CRC square pipes frame is placed on the25mm x 25mm x3mm M.S. L Angle with 60 x 10m thickness flat is used for support.• Closing Caps are made up of high quality Fiber reinforcedPlastic material. • High tensile steel with galvanized nuts and bolts are used for assembly.• The powder coating is done with PurePolyester powderAckzonoble or Berger Paints with 60 to70 micron thickness. |
| 6 | SIT UP BOARD DOUBLE• PRODUCT DIMENSIONS: - 1760mm (Length) x 1140mm (Width) x 660mm (Height).• SAFE WORKOUT AREA: - 2500mm (Length) x 1600mm (Width).• The Sit up Board double made from \"C\" Class GI pipe. Center column made from 100mm NB \"C\" class G.I. Pipe.• The main frame is of 25mm NB made from \"C\" Class GI pipe. FRP sheet of 3mm thickness is molded on main frame.• The remaining frame of the sit up board is of 32mm NB made from \"C\" class GI pipe.• The powder coating is done with Pure Polyester powderAckzonoble or Berger Paints with 60 to 70 micron thickness. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \"C\" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mmthickness and 20mm x 40mm CRC square pipes of 3mmthickness. |
| 7 | SEATING & STANDING TWISTER• DIMENSIONS: - 1700mm (Length) x 540mm (Width) x1250mm. (Height).• SAFE AREA: - 3 Mtr x 1Mtr.• Seating &Standing Twister equipment made from \"C\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The Center Pipe is of 100mm NB made from \"C\" Class G.I. Round Pipe.• The M.S. round plate of 0250 mm & 10mm thickness is welded at bottom.• Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance.• The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from \"C\" class G.I. pipe.• The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from \"C\" class G.I. pipe of 25mm NB.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \"C\" class, Welded with M.S. round plate of 0250 mm& 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of3mm thickness.• The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mmthickness.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• The Pins used are made up of 0 35 mm SAE 8620 brightmaterial. |
| 8 | Seated Puller• DIMENSIONS: - 1900mm (Length) x 740mm (Width) x1920mm. (Height).• SAFE AREA:- 1.2Mtr x 3Mtr• Seated puller equipment made up of \"C\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100NB made from \"C\" Class G.I. pipe. • Bottom support i s of M.S. round plate of 0 250 mm & 10mm thickness is welded.• All linkages are made up of 25NB \"C\" class G.I. pipe.• The handle frame is of 32NB \"C\" class G.I. pipe.• The seat frame is of 32NB \"C\" class G.I. pipe,• To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \"C\" class. Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness.• The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material.• The bearings used are of \" 6205zz\" and \"6203zz\" permanent lubricated sealed bearing of reputed brand. |
| 9 | CHEST PRESS CUM SEATED PULLER• DIMENSIONS: - 2000mm (Length) x 710mm (Width) x2200mm. (Height).• SAFE AREA: - 3.0 Mtr x 1.7Mtr.• Chest press cum seated puller equipment made up of \"C\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100NB made up of \"C\" Class G.I. pipe.• The bottom welded with support of M.S. round plate of 0250 mm & 10mm thickness.• The connecting pipes are made up from 25NB \"C\" class G.I. pipe.• The handle frame is made up from 32NB \"C\" class G.I. pipe.• To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \"C\" class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material.• The bearings used are of \"6205zz\" &\"6203zz\" permanent lubricated sealed bearing of reputed brand• High tensile steel with galvanized nuts & bolts are used for assembly |
| 10 | THI-CHI SPINNER (2 WHEEL)• DIMENSIONS: - 700mm (Length) x 1000mm (Width) x1280mm (Height).• Safe Area:- 1.9Mtr X 1.9Mtr• Thai chi spinner Equipment made up of \"C\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters.• The center pipe is of 100NB made up of \"C\" Class G.I. pipe.• The handle movement round frame is made up from 25 NB \"C\" class G.I. pipe• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \"C\" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• The pins used are made up of 0 25 mm of SAE8620 bright material.• The bearing used is \"6201zz\" &\"6205zz\" permanent lubricated sealed bearing of reputed brand.• High tensile S. S. nut bolts are used for assembly.• Foundation cover Closing Cap is made from FRP Material with 0.7 mm thickness.• The cerclips used for assembly is of A24 and All.• The nylon bush is used for handle knob.• The powder coating done with pure Polyester powders from Ac kzo n o b I e or Berger Paints with 60 to 70 micron thickness.• Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. |
| 11 | SURFING BOARD• DIMENSIONS: - 1000mm (Length) x 600mm (Width) x1400mm.(Height).• Safe Area:-1.5 x 1.3Mtr.• Surfing Board Equipment made from \"C\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• T h e main frame is of 80mm NB made from \"C\" class G.I. pipe.• The bottom support welded of M.S. plate of 0 250 mm &10mm thickness.• The handle frame is of 25N B made from \"C\" class G.I. pipe.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB \"C\" class welded with M.S. round plate of 0250 mm & 10rnm thick. Mainpipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Bushes are used 70mm Outer Diameter with 5mm thickness is used.• The footrests made from high quality fiber reinforced plastic.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• T h e pins used are made up of 035 mm SAE 8620 bright material.• The bearing used are of \"6007zz\" permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nut bolts are used forassembly.• T h e cerclips used for assembly is of A34.• The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with minimum 60 to 70 micron thickness |
| 12 | BACK EXTENSIONDIMENSIONS: - 1400mm (Length) x 700mm (Width) x 820mm (Height). SAFE AREA: - 2.4Mtr x 1.7Mtr. Back Extension Equipment made from \"c\" G.I. Pipe of different NB pipe. (NB stands for Nominal Bore i.e. Internal Diameter of pipe in mm). The main frame is of 50mm NB made from \"c\" Class G.I. pipe. The Foot resting frame of 32mm NB made from \"c\" Class G.I. pipe. The handle frame is of 25NB made from \"c\" Class G.I. pipe. The seat fitted on the outer frames i s made up of M.S. Sheet of size 330mm X 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. The foundation used for fixing is consists of 50mm NB made from \"c\" Class G.I. pipe. The footrests are made from casted Aluminum material, having sizes 130 x 310 x 5 mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. The powder coating done with Pure Polyester powder o f Ackzonoble or Berger with 60 to 70 micron thickness. |
| 13 | Providing and Fixing of Sea Saw four seaterSea saw four seater stand pipes made up of 50mm nominal bore M.S. medium grade of reputed make (Jindal, Prakash Surya, Tata) 1.50mtr. Long and 0.50 mtr. High from ground level with two nos sea saw planka of 40mm nominal bore M.S. medium grade of reputed make (Jindal, Prakash Surya, Tata) 2.0 mtr. long pipe comprised with four nos 16 SWG galvanised sheet press moulded 375mm x 300 mm with back rest of 15mm nominal bore M.S. medium grade of reputed make (Jindal, Prakash Surya, Tata) pipe, sea saw four seater have two nos specialy designed ball bearing system each ball bearing system contains two nos ucp 205 catesd ball bearing assembally, one nos 27mm x 150 mm long M.S. solid bearing shaft for smooth movement. All welded joints are well ground with cement concrete mix (1:1.5:3) size 30x30x45 cm. including exavation of earth as per required work completed as per direction ofengineer in charge and specified notes. |
| 14 | Providing and Fixing of Deluxe SlideDeluxe Slide made of 16 SWG 430 grade stainless steel sheet joint less bend in (C ) shannel the length of slide shall not be less than 10 Ft. and width shall not be less than 16\" size with 20mm nominal bore M.S. medium grade of reputed make (Jindal, Prakash Surya, Tata) piep with argon welding, size of platform 18\" x 20\" inch made of 40x40mm thick angle iron with underneath supports with 16 SWG allumenium chequered sheet mounted on 40mm nominal bore M.S. medium grade of reputed make (Jindal, Prakash Surya, Tata) with 25mm nominal bore M.S. medium grade or reputed make (Jindal, Prakash Surya, Tata) pipe railing, joints are well grinded, filled with epoxy sealent and chemically cleaned before painting, all parts done one oat of red oxide to avoid rusting and one coat of spray painted in multi colour for dazzling look - deluxe slide fixed in ground with cement concrete mix(1:1.5:3) size 30x30x30 cm includig exavation of earth as per required work completed as per direction of engineer in charge and specified notes. |
| 15 | Providing and Fixingof Double SwingDouble swing top pipe made up of 50mm nominal bore M.S. medium grade of reputed make (jindal, Prakash Surya, Tata) 3.00 Mtr. Long jointed with four nos legs of 40mm nominal bore M.S. Medium Grade of reputed make (Jindal, Prakash Surya, Tata) 3.0 Mtr. long pipe (After installation2.40 Mtr.) with the help of specialy designed trapeze shape two nos junction box, each junction box contains two nos 4mm thick trapeze shape plates jointed with 50mm x5mmM.S. flat iron, double swing have two nos specialy designed ball bearing system each ball bearing system contains two nos ucp 205 casted ball bearing assembally, one nos 27mm x 600 mm long M.S. solid bearing shaft and two nos press bended (I) hoocks for hanging chain seats, chain should be minimum 6mm thick electro galvanised tested jointed with 150mm x 5 ply nylon reinforced rubber seat for safe and comfortable swing. All welded joints are well grinded, filled with epoxy sealent and chemically cleaned before painting, all parts done one coat of red oxide to avoid rusting and one coat of spray painted in multi colour for dazzling look. |
| 16 | Providing and fixing of four seater merry go roundfour seater merry go round having a dia of 1500 mm center pipe is 50 mm nominal bore MS medium grade of reputed make ( jindle praksha surya tata ) 300 mm long pipe jointed with four nos arm of 40 mm nominal bore MSmedium reputed grade make ( jindle praksha surya tata )750 mm long pipae seats handle and supports pipae should be 20 mm nominal bore MS medium grade of reputed make ( ninsle praksha surya tata ) pipae seat is 16 SWG galvanised Merry go round four seater have one nos specially designed ball bearing system ba;; bearing system contain 6306 and 6308 double zet permanetly lubricated ball bearing one nos 40mm x 1250 mm long MS solid bearing shaft for smooth movement all welded joints are well grintedfilled with epoxy sealent and chemically cleaned before painting all parts done one coat of red oxide to avoid rusting and one coat of spray paimted in multi colour for dazzling look four seater merry go roundfixed in ground with CC mix(1:1.5:3) size 30x30x45 cm including exacavation of earth as per required work completed as oper direction of engineer in chaerge and specified notes |
