Construction Of Academic Block In K.G.B.V. Campus, Lambhua Distt. Sultanpur
Tender Value
98.91 Lakhs
Estimated cost
Bid Submission
22 Mar 2022
0 days left
EMD
1.98 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lambhua → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Academic Block In K.G.B.V. Campus, Lambhua Distt. Sultanpur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in exacavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 30 mt. from the foundation trenches. |
| 2 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 3 | Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. |
| 4 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete |
| 5 | (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm |
| 6 | (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer\"s standard dilution) |
| 7 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-200. |
| 8 | As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete) |
| 9 | As in item 6 but for thelighterbeams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete) |
| 10 | As in item 6 abovebut inR.C.C. Raft foundation & footing .(Using1:1.5:3Mix concrete) |
| 11 | As in item 6 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20. |
| 12 | M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. |
| 13 | Same as in item no. 11 abovebutin super-structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. |
| 14 | Same as in item no. 12 but in1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. |
| 15 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 16 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 17 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 sand |
| 18 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 sand |
| 19 | 15 mm cement plaster on rough side of single or half brick wall of mix : 1:3 (1 cement: 3 coarse sand) |
| 20 | Making grooves 10 to 12mmwide xam deep in plaster of the walls or in ceiling vertically or horizontally as required. |
| 21 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 22 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm |
| 23 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 24 | Kota stone slabs 20 mm thick in risers of steps, skirting laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing & polishing complete. |
| 25 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. |
| 26 | Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. |
| 27 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). |
| 28 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
| 29 | 35 mm thick Single leaf |
| 30 | Double leaf |
| 31 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. |
| 32 | Providing & fixing of hold fast for chaukhatsof doors and windows. |
| 33 | Providing & fixing of door / windows grill. |
| 34 | Z-Section steel windows with Openable panels, |
| 35 | excluding Glass panes. |
| 36 | Angle iron door chaukhats 40*40*5 |
| 37 | Fixing of Door, windows / ventilators chaukhats in position. |
| 38 | (a) Door chaukhats |
| 39 | (b) Window chaukhats |
| 40 | (c) Ventilator chaukhats |
| 41 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. |
| 42 | Finishing walls with water-proofing on cement paint of approved make such as super snowcem, durrocem, robiacem, guttucem supercem quality and of required shade on undecorated wall surfaces (three coat) over one and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 44 | Providing & fixing Stainless steel sliding door bolts ISI marked to required colour or shade with nuts and screws etc complete. |
| 45 | (a) 250mm x 16mm |
| 46 | Providing and fixing stainless steel tower bolts with necessary screws etc. complete: |
| 47 | (a) 250 mm x 10mm |
| 48 | (b) 200 mm x 10mm |
| 49 | Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm |
| 50 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 51 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 52 | Same as item above but on new wood surface. |
| 53 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick. |
| 54 | Construction of drain along with apron. |
| 55 | Providing and fixing in position collepsible steel shutters with verticals chanels 20*10*2mm and braced withflate iron digonals 20*5 mm. size with top and bottom rails of T iron 40*40*6 mm. with 38 m diasteel pulleyswith bolts. Nut locking arregement stopers handle of approved lead point. |
| 56 | Chequerred terrazo tiles 20 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 57 | P/F straight Grab bars in stainless steel 32mm dia, 60mm ciearance and 600 mm long |
| 58 | P/F drop down Grab bars in stainless steel 32mm dia. |
| 59 | SANITARY FIXTURES & ACCESSORIES : I |
| 60 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 61 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 62 | Same as above but for European type W.C. pan with white plastic seat and lid.Make- Cera,Hindware. |
| 63 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require |
| 64 | a)White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap. |
| 65 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls. |
| 66 | a) Three urinal basin with5 litrewhite P.V.C.automatic flushingcistern |
| 67 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fitting and brackets, cutting and making good the wall wherever required : |
| 68 | Size 450x300x150mm |
| 69 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. |
| 70 | Semi rigid pipe |
| 71 | a) 32mm dia |
| 72 | b) 40mm dia |
| 73 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 74 | Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge. |
| 75 | 15mm nominal bore |
| 76 | Providing and fixing CP Brass 32 mm sizeBottal Trap of approved quality & make and as per thedirection of Enginer-in-charge. |
| 77 | SOIL WASTE & VENT PIPES AND FITTINGS - II |
| 78 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. |
| 79 | a) 110mm diameter |
| 80 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 81 | a) 110mm |
| 82 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. |
| 83 | a) 110mm |
| 84 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 85 | Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, cowels, clamps, hangers, rubber rings, clean outs etc. fixing at wall / ceiling / floor level supported by clamp & hangers etc.inside duct / suspended from floor under false ceilingfor proper completion of the work. The rubber ring shall confirm to IS:5382. (Make : Supreme / Ashirvad/Finolex / Prince)(Pipe support : Intellotech / Easyflex / Chilly) |
| 86 | The Pipes will be supportedby either rubber lined G.I. U strap clampson 50x50x5 mm MS slotted angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent pipes). The The cost will include all support arrangements. The work includes cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. |
| 87 | 110 mm dia |
| 88 | 75 mm dia |
| 89 | Providing & fixing UPVC Floor trap of self cleansing designwith CP Jalicomplete in all respects. (Make : Supreme / Ashirvad/Finolex / Prince) |
| 90 | 110x110 mm P-Type |
| 91 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.. (Make : Supreme / Finolex / Prince) |
| 92 | Reducing Door Tee 110x110x75 mm |
| 93 | Door Tee |
| 94 | 110x110x110 mm |
| 95 | 75x75x75 mm |
| 96 | Bend |
| 97 | 110 mm |
| 98 | 75 mm |
| 99 | Terminal guard. |
| 100 | 110 mm |
| 101 | 75 mm |
| 102 | WATER SUPPLY PIPES AND FITTINGS - III |
| 103 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. |
| 104 | (internal work) |
| 105 | Exposed on wall |
| 106 | 50mm dia nominal bore |
| 107 | Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality. |
| 108 | 50mm dia nominal bore. |
| 109 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 110 | (internal work) |
| 111 | Exposed on wall |
| 112 | 20mm dia nominal outer dia pipes |
| 113 | 25mm dia nominal outer dia pipes |
| 114 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. |
| 115 | Concealed work including cutting chases and making good the walls etc. |
| 116 | 15mm dia nominal outer dia pipes |
| 117 | 20mm dia nominal outer dia pipes |
| 118 | 25mm dia nominal outer dia pipes |
| 119 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. |
| 120 | a) 15mm nominal bore |
| 121 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 |
| 122 | a) 15mm nominal bore |
| 123 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 124 | a) 15mm nominal bore |
| 125 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 |
| 126 | a) 15mm nominal bore |
| 127 | Providing and fixing gun metal gate valve with wheel of approved quality. |
| 128 | 20 mm dia nominal bore |
| 129 | 25mm dia nominal bore |
| 130 | 50mm dia nominal bore |
| 131 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 132 | SCHEDULE OF QUANTITIES FOR INTERNAL SEWERAGE - IV |
| 133 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, |
| 134 | in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. |
| 135 | Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia. |
| 136 | Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. |
| 137 | 100mm diameter |
| 138 | 150mm diameter |
| 139 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. |
| 140 | 100mm diameterS.W. Pipe |
| 141 | 150mm diameterS.W. Pipe |
| 142 | Providing and fixing square mouth S.W. Gully trap grade \"A\" complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm.size (inside) the weight of cover to be not |
| 143 | less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. |
| 144 | a) 150 x 100 mm. size P type |
| 145 | With Sewer bricks conforming to IS : 4885 |
| 146 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design |
| 147 | Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). |
| 148 | With FPS bricks of class designation 75 |
| 149 | (i) For Sewer Line |
| 150 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design |
| 151 | With 20x20 mm square bar |
| 152 | (NON SCHEDULE ITEMS) |
| 153 | Providing and Fixing C.P. brass Ablution health faucet assembly with 1.20 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC] Make-ESSCO ALE-583 |
| 154 | Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore-ESSCO SQT 526AKN |
| 155 | Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw. ESSCO AEC-1111 |
| 156 | Supplying & Fixing ofCP soap tray fixed to the wallwith PVC rubber plug with CP brass screws- Make-ESSCO AEC-1131 |
| 157 | SCHEDULE OF QUANTITIES FOR ELECTRICAL WORKS |
| 158 | Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash. |
| 159 | Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash. |
| 160 | Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed, including matching color wash. |
| 161 | Supply & wiring of submains with two number2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick)PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduitcomplete in all respect. |
| 162 | Supply & wiring of submains with two number4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick)PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduitcomplete in all respect. |
| 163 | Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy duty PVC conduit partly laid in slab along with reinforcement before concreting withcopperearth continuity wire etc. complete in all |
| 164 | 4 X 10sqmm |
| 165 | Supply and wiring of submain 4 number 16 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. |
| 166 | 4x16sqmm |
| 167 | Supply & fixing of single wall bracketon matching M.D.F.E.G.boardbase etc. complete in all required. |
| 168 | Cat. A |
| 169 | Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete including tube on surface complete in all respect. |
| 170 | 1 X 22 W CAT-AAA |
| 171 | Supply & Fixing of recess mounting round 15 to 18 Watt LED down lighter having powder coated die cast aluminium housing with heat sink, difuser / reflector and driver set complete in all respect.( Mirror Light) |
| 172 | Supply and fixing of LED street light fitting havingdie cost aluminium body and diffuser with driver set suitable 75 to 90 Watt Confirming to IP 66 and above protection complete in all respects.On wall. |
| 173 | S/F of water lightoblong 10 watt LED bulk head iuminaire with driver set confirming to IP 65 and above Protection. Comlete in all respect. |
| 174 | Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. |
| 175 | Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects. |
| 176 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. |
| 177 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. |
| 178 | 600x480x200 mm. size |
| 179 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followedby two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. |
| 180 | 600x480x200 mm. size |
| 181 | Supply and fixing of surface/ flush mounting 4way TPN distribution board with additional metal doorwithout MCB complete in all respect, as directed at site by Engineer Incharge. |
| 182 | 4 way TPN |
| 183 | 6 way TPN |
| 184 | Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve |
| 185 | 5 - 32 amps.Cat. A |
| 186 | Supply and fixing 25 Amp. TPN miniature circuit breakers in existing MCB, DB complete in all respects as required. |
| 187 | Supply and fixing of 40 Amp. 4 Pole MCB (10KA) |
| 188 | CAT A |
| 189 | Supply and fixing of 63 Amp. 4 Pole MCB (10KA) |
| 190 | CAT A |
| 191 | Supply and fixing of single pole MCB blanking plate |
| 192 | CAT B |
| 193 | Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealedM.S. box including supply of all material, labour T & P etc required for proper completion of work. |
| 194 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. |
| 195 | Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. |
| 196 | Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properlyetc. complete as required. |
| 197 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. |
| 198 | Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 199 | Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system |
| 200 | CABLES |
| 201 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 202 | 70 sqmm 3.5 core |
| 203 | Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) |
| 204 | in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. |
| 205 | The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. |
| 206 | Incoming |
| 207 | 100A TPN - 1No. |
| 208 | Outgoing |
| 209 | 32A TPN - 2No. |
| 210 | Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E.rules. |
| 211 | Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality. |
| 212 | PART C - NON - SCHEDULED ITEMS (AS PER MARKET RATES ) |
| 213 | Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA Cat No. TURBO JET DLX |
| 214 | 300mm sweep. |
| 215 | Supply & Fixing of wall mounted fan ( Air Duos 400 mm 3 Blade Wall Fan ) |
| 216 | SEPTIC TANK |
| 217 | Earth work in excavation |
| 218 | P.C.C. in Foundation (1 :4 :8) |
| 219 | 1st Class B/Win Septic tank (1cement : 6 coarse sand) |
| 220 | R.C.C. work in septic tank (M-20) |
| 221 | M.S. work in R.C.C. Qty same as item no 4*1.00*0.785 |
| 222 | 12 mm thk Plastering inside septic tank 1 cement : 3 coarse sand |
| 223 | Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concete block 1:3:6 (1 cement : 3 coarse :6 graded aggregate of nominal size 20 mm ) as per standard with 20x20 mm sqm. bar. D.S.R. - 19.15.1*0.8345 |
| 224 | Providing & fixing soil, wast and vent pipe. |
| 225 | 75 mm dia sand cost iron S&S pipe. D.S.R. - 17.35.2.1*0.8345 |
| 226 | Providing & fixing sand cost iron terminal guard 75 mm dia. D.S.R. - 17.56.2.1*0.8345 |
| 227 | Providing & fixing C.I. tee at the inlet & outlet of septic tank. D.S.R. - 7087 |
| 228 | Providing & fixing plane sand cost iron S&S bend of required degree.D.S.R. - 17.38.2.1*0.8345 |
| 229 | 75 mm |
| 230 | Providing lead caulked joints to sand cost iron/ cetrifugally cast (squn) irons pipes & fitting of dia. D.S.R. - 17.58.2*0.8345 |
| 231 | 75 mm |
| 232 | Supply & fixing of medium quality R.C.C. Manhole coverwith frame complete.HD.-20-Circular shape ,560 int. dia. D.S.R. - 19.19.3.1*0.8345 |
| 233 | M.D.-10- square shape ,450 int. dia. D.S.R.- 19.19.2.1*0.8345 |
| 234 | Constructing circular soak pit 2.5m internal diameter and 3m effective depth including excavation, disposal of surplus earth, refilling it with coarse aggregate and RCC slab on to 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate) with 450mm dia |
| 235 | Detailed Estimate for Submersible Boring with pump |
| 236 | External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 2.00 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc . |
| 237 | 110MM PVC casing pipe of ISI mark. |
| 238 | 110MM PVC slotted pipe of ISI mark. |
| 239 | P/ F 50mm GI pipe (B) class. |
| 240 | Nylon mesh for filter. |
| 241 | Plastic dori. |
| 242 | Solvent cement. |
| 243 | 110mm End cap. |
| 244 | 110mm Submersible cap. |
| 245 | 50mm MS clamp (Heavy). |
| 246 | 50mmGI elbow. |
| 247 | 50mm X 110mm GI nipple. |
| 248 | 2 HP 9 Stage submersible pump of ISI mark with automatic panel. |
| 249 | 2.5 sqm. Submersible cable. |
| 250 | Drilling charges for 6\" dia tubewell. |
| 251 | Pea Gravel. |
| 252 | 2\" MS socket. |
| 253 | Cartage of material upto site. |
| 254 | Fixing testing and commissioning of Pumpset with lowering & Electric wiring with starter etc. complete as required. |
| 255 | INTERLOCKING PATHWAY |
| 256 | GST extra as per applicable |
AI Tender Summary
Tender Timeline
Mar 15, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender