Drilling Of Two Numbers Bore With Submersible Pump At Radha Sagar Banmuda At Hardi Bazar Of Dipka Expansion Project Of Dipka Area
Tender Value
6.80 Lakhs
Estimated cost
Bid Submission
26 Mar 2022
0 days left
EMD
8500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dipka → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Drilling Of Two Numbers Bore With Submersible Pump At Radha Sagar Banmuda At Hardi Bazar Of Dipka Expansion Project Of Dipka Area
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION |
| 2 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & runningcharges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer – in-charge, upto 90 metre depth below ground level. All types of soil. 300 mm dia. |
| 3 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & runningcharges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer – in-charge, upto 90 metre depth below ground level. Rocky strata including Boulders300 mm dia |
| 4 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – in-charge. 150 mm nominal size dia. |
| 5 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia. |
| 6 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 7 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 8 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \"V\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction ofEngineer-in-charge. |
| 9 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. |
| 10 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 40 mm nominal bore. |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal outer dia pipes. |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia .Pipes. |
| 13 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: |
| 14 | Installation of submersible pump of 5 HP, 12 stage of approved make ISI Marked confirming to IS:8034 - 2002 and motor confirming to IS:9283 - 1995 |
| 15 | Providing and fixing motor starter of L&T make for submersible pump 10 pole AC3 - 415 v ( 9- 14 Amp) |
| 16 | Providing and fixing 3 core flatcable copper wire2.5 sqmmsize of approved ISI marked |
| 17 | supplying and fixing UPVCcolumn pipe 40 mm dia of Prince brand or equivalent as per instruction of Engineer-in-charge. |
| 18 | Providing and fixing 6 mm dia wire rope with PVC insulation for holding pump & pipes etc complete. |
| 19 | Total impact of GST for the purpose of CTC |
AI Tender Summary
Tender Timeline
Mar 15, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 28, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender