Military Engineer Services-MES has published Spl Repair To Apfc ( Automatic Power Factor Correction Panel ) And Street Light At Pine Walk, Anjali, Dm Line 101 Area Incl Certain Revnue Works In Bldg No 67, 67A, Mes / 22 And Mes 15 At Anjalee Complex And Shillong Catt Area Under Ge Shillong. Spl. Submission Date for this Tender is 28-03-2022. Power Factor Panel Tenders in shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Mar-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-03-2022 |
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar patternroof covering complete all as specified and directed. |
| 2 | Demolition of brick or solid concrete block walling built in cement mortar etc complete all as specified and directed. |
| 3 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantling of wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and as directed. |
| 5 | Dismantling of floor hearth or wall tiles including cement mortar bedding (but not backing) removing serviceable to store and rubbish of the premisescomplete all as specified and directed. |
| 6 | Taking down chowkats or frames n. exc. 1.5 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed. |
| 7 | Taking down chowkats or framesexc. 1.5 Sqm but n.exc 4 sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed. |
| 8 | Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and removing from site complete all as specified and directed. |
| 9 | Taking down cement plaster on brick or concrete surfaces in anyposition including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed by Engineer-in-Charge. |
| 10 | Excavation in trenches in soft / loose soil n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting outetc complete all as specified and directed by Engineer in Charge. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in any type of soil etc complete all as specified and as directed by Engineer in Charge. |
| 12 | Removing excavated materials (soil) to a distance n.exc 50 mand depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer in Charge. |
| 13 | Removing excavated materials (soil) to a distance n.exc 250 mand depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer in Charge. |
| 14 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed by Engineer in Charge. |
| 15 | M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, exceeding 10 Cm width and setting in cement sandmortar 1:6 complete all as specified and directed. |
| 16 | M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, not exceeding 10 Cm width and setting in cement sandmortar 1:6 complete all as specified and directed. |
| 17 | M&L forHardcore of crushed stone, gaugen exc 63mm, deposited, spread and levelled wellin layers n exc 15cm thick, watered and rammed to a true surface etc complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engineer in Charge. |
| 19 | M&L for 75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engineer in Charge. |
| 20 | M&L for RCC 1:1?2:3 (nominal mix)(using 20mm graded stone aggregate) as inslabs supported on walls, columns and simliaretc., complete, all as specified and as directed by Engineer in Charge. |
| 21 | M&L for RCC 1:1?2:3 (nominal mix)(using 20mm graded stone aggregate) as infoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed by Engineer in Charge. |
| 22 | M&L for RCC 1:1?2:3 (nominal mix)(using 20mm graded stone aggregate) as inColumns,pillars,piers,posts and struts etc complete all as specified and as directed by Engineer in Charge. |
| 23 | M&L for RCC1:1?2:3 (nominal mix) (using 20mm graded crushed stoneaggregates) as in Beams, cantilevers, bressummers, lintels, bands over 1.5m span complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for Precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slab(for Manholes etc), landings, chajja, water troughs etc., set in CM (1:6)including necessary formwork etc., complete, all as specified and directed. |
| 25 | M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality, conforming to best quality, complete, all as specified and directed by Engineer in Charge. |
| 26 | M&L for Mild steel TMT deformed bars, 5 mm dia and over and upto 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to best quality, complete, all as specified and directed by Engineer in Charge. |
| 27 | M&L rolled mild steel conforming to Fe 290 (Gde E-165), in rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel orflatsections)fixed with angle cleats or other connecting plates including distance pieces, cleats, plates, welding/rivets/bolts, Fe 410 -W (Gde E- 250) quality A etc complete all as specified and as directed. |
| 28 | S&F iron angle for water tank staging and like structures incl caps, bases, splices etc built up from two or more angles including stiffeners, gusse plates etc., of Fe-290 (Gde E 165), complete, all as specified and directed by Engineer-in-Charge. |
| 29 | S&F framed work such as grills, gratings etc with ends of bars shouldered or riveteted or foged into spikes, framed guard bars conforming to FE 290 Gde E-165, complete, all as specified and directed by Engineer-in-Charge. |
| 30 | Formwork to sides of concrete of rough finished on flat surfaces in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engineer in Charge. |
| 31 | M & L for Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landing and similar items(horizontal or sloping) rough finished flat surfaces complete all as specified and as directed by Engineer in Charge. |
| 32 | Formwork in rough finished surfaces of of rectangular, square or polygonalsides of pillars, posts, struts, piers,columns and stanchions complete all as specified and as directed by Engineer in Charge. |
| 33 | Formwork to sides and soffits in rough finished flat surfaces of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including support,overhangs etc also splays between floors and beams complete all as specified and as directed by Engineer in Charge. |
| 34 | M&L for Sand filling under floor including watering and well ramming, complete, all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate ) as in plinth protection , sub floor etcfinishes concretesurface even & smooth or rough without using extra cementlayed in bays not exc. 2.00m including necessary formwork etc complete all as specified and directed. |
| 36 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 1.0 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 37 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tilesexceeding 0.36 Sqm but not exceeding 1.0 sqm, in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4,complete, all as specified and as directed. |
| 38 | M&L forNon-skid ceramic colour tiles 7 to 8 mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and asdirected by Engr-in-charge. |
| 39 | M&Lfor Glazed ceramiccolour tiles of size 300 x 450 x 7mm/ 300 x 600 x 7 thick in vertical surfaces of wall such as skirting, dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete as specified and directed. |
| 40 | M&L for machine pressed polished factory made pavement chequered cement concrete tiles of size 200 X 200 X 25 or, 300 X 300 X 25 mm thick of approved design and colour , set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15 mm thick screed bed in cement sand mortar (1:4)complete all as specified and as directed. |
| 41 | M&L for Granite 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete,all as specified and directed. |
| 42 | Labour only for chamfer, splays or arris in facework of granite not exc 15mm wide, complete, all as specified and directed. |
| 43 | S&F pre-painted Galvalume aluminium zinc coating, GI based, corrugated steel sheet 0.50mm thick as in roof coveringof tensile strength 550 MPa, including fixing with self driving machine made screws, washers andfittings, of same manufacture of approved profile, shape and colour etc., complete, all as specified and directed. |
| 44 | S&F pre-painted Galvalume aluminium zinc coating, GI based, plain steel sheet 0.50mm thick as in ridges, hips, valley gutter, drip, straight flashing etc., of tensile strength 550 MPa, including fixing with self driving machine made screws, washers and fittings, of same manufacture of approved profile, shape and colour etc., complete, all as specified and directed. |
| 45 | S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed. |
| 46 | S&F GIframe work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 47 | S&F 4mm thick E board 600 x 600mm pre-painted fiber cement building board, designer or decorative type with different design as approved by Engr-in-charge,fixed or laid/ inserted to timber/ GI/ Aluminium framework with nails as in ceiling, complete all as specified and directed. |
| 48 | M&L for 12 thick seamless calcium silicate ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillings head with under head cutter at 200 mm centre to centre incl finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish fibre tape to provide incl two coat of putty and two coat of OBD design incl GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasternerswith and incl ceiling section (nexc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c complete all as specified and as directed. |
| 49 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of (2.3mm ± 0.2mm), Window profile with hollow section with multi-chamber, frame (60mm x 58mm), sash (60mm x 78mm), T-profile (One vertical length in between two shutters) (60mm x 4mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, including builder’s hardware casement door handle made of zinc alloyed (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with strikes, 3D Hinges of zinc alloyed (white powder Coated) and 5mm thick glazing with selected quality glass, complete, all as specified and directed by Engr-in-charge. Note: The unit rate quoted by contractor excludes cost of glass and includes all other Connected accessories. Net opening will be measured for payment purpose. |
| 50 | Providing and fixing factory made uPVC white color casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ± 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners including builder’s hardware casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system and 5mm thick glazing with selected quality glass, complete, all as specified and directed by Engr-in-charge. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area exc. 1 sqnm but not exc. 2.0 sqm. |
| 51 | S&F powder coated (minimum powder coating 50micron) anodised aluminium frame for doors, windows, ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 52 | S&F powder coated (minimum powder coating 50micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc., complete, all as specified and upto the entire satisfaction of Engineer in charge. Note:Cost of aluminium fittings such as hinges etc. replaced shall deemed to be included in the rate quoted. |
| 53 | S&F powder coated (minimum powder coating 50micron) anodised aluminium window and ventilator shutters, side hung/ sliding type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc. including aluminium fittings such as peg stays 150mm long(1 No), hinges type B-21 100mm long (2 no), suitable handle(1 no) complete all as specified and upto the entire satisfaction of Engineer in charge. Note:Cost of aluminium fittings such as hinges etc. replaced shall deemed to be included in the rate quoted. |
| 54 | S&F 4.80mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane, fixed with spring clips etc., complete, all as specified and directed. |
| 55 | S&F 4.80mm thick frosted glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane, fixed with spring clips etc., complete, all as specified and directed. |
| 56 | S&F venetian blinds of width 50mm and thickness of material 5mm of wooden finish with all necessary arrangements for fixing and movement of blinds complete all as per manufacturer"s instructions and as specified and directed by Engr-in-charge. |
| 57 | S&F roller blinds of width 50mm and thickness of material 5mm of wooden finish with all necessary arrangements for fixing and movement of blinds complete all as per manufacturer"s instructions and as specified and directed by Engr-in-charge. |
| 58 | S&F Brass Handle, Fancy type,fabricated type, 100mm length,ISI marked, complete, all as specified anddirected by Engr-in-charge. |
| 59 | S&F Brass Handle, Fancy type,fabricated type, 150mm length,ISI marked, complete, all as specified anddirected by Engr-in-charge. |
| 60 | S&F butt hinges 100 mm size, extruded brass with mild steel hinge pin bright polsihed and fixed type B-11,ISI Marked, complete, all as specified and directed. |
| 61 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap ( when open) 30 mm complete all as specified and as directed. |
| 62 | M&L for Rendering 15 mm thick in cement sand mortar (1:6) on brick or concrete works finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge. |
| 63 | M&L for Rendering 15 mm thick in cement sand mortar (1:4) on brick or concrete works finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge. Note:- WPC shall be measured and paid separately. |
| 64 | Supply only integral water proofing compound, ISI marked, complete, all as specified and as directed. |
| 65 | M&L 2nd class hard wood in scantling wrought timber fixed complete all as specified and directed. |
| 66 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 67 | M&L2nd class hard wood plain fillets square rectangular or triangular in section clean sawn secured with nails or brads sectional area exc 13 sqcm n exc 25 sqcm, including dismantling of userviceable fillets, complete, all as specified and directed. |
| 68 | M&L2nd class hard wood plain fillets square rectangular or triangular in section clean sawn secured with nails or brads sectional area exc 13 sqcm n exc 25 sqcm complete all as specified and directed. |
| 69 | S&F20mm thick 2nd class hard wood boarding in wall panelling plained one side with butt joints fixed as directed by Engr-in-charge,complete, all as specified and directed. |
| 70 | M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber framework, complete, all as specified and directed. |
| 71 | M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber framework, complete, all as specified and directed. |
| 72 | S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides conforming to IS-2202 (Part-I), 1983 complete all as specified and directed. |
| 73 | S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing, complete, all as specified and directed by Engr-in-charge. |
| 74 | S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing, complete, all as specified and directed by Engr-in-charge. |
| 75 | M&L for 12 mm thick PVC board of grade 1 quality exterior grade fixed with screws to timber frame, complete, all as specified and as directed. |
| 76 | M&L for 18/19 mm thickWPC (Wood plastic composite) board of grade 1 quality exterior grade fixed with screws to timber frame, complete, all as specified and as directed. |
| 77 | S&F 0.90mm thick decorative laminate type1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacture"s instructions complete all as directed. |
| 78 | S&F ball bearing drawer channel (soft close) of size 500 mm long fixed as per manufacturer"s instructions,complete, all as specified and directed by Engr-in-charge. |
| 79 | M&L 12 mm thk toughened sheet clear glass incl edges bevelled / rounded incl grinding / cutting,with all fittings, washers, handles andbolts, complete, all as specified and directedby Engr-in-charge. |
| 80 | S&F Vitreous China wash downwater closet size 755x365x655,EWC, single piece, WC with UF soft close slim seat cover with hinges, fixing accessories set and accessories set, Cistern fittings including P Trap- 180mm, fixed in position, complete, all as specfied and directed by Engr-in-charge. Make:- Jaquar Cat Part No-LYS WHT 38851PSM or equivalent make of Cera/ Parryware/ Hindware |
| 81 | S&F table top round shape Vitreous china wash hand basin, size 635x430x190 mm including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts,complete, all as specified and as directed by Engineer-in-Charge. Make:(wash hand basin) Jaguar Cat Part No-ARS WHT 39601, (Waste Coupling) Jaguar ALD 727 or equivalent make of Cera/ Parryware/Hindware. |
| 82 | S&F in repairstable top round shape Vitreous china wash hand basin, size 555 x 425 x195mm including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts,complete, all as specified and as directed by Engineer-in-Charge. Make:(wash hand basin) Jaguar Cat Part No-FLS WHT 5701, (Waste Coupling) Jaguar ALD 727 or equivalent make of Cera/ Parryware/Hindware. |
| 83 | S&F 450mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15mm bore pipe line complete all as specified and directed. |
| 84 | S&F stack clamps out of 75mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends to stays to wall or roof complete all as specified and as directed. |
| 85 | S&F 15 mm bore CP health faucet (ABS Body) with 8mm dia flexible pipe 1.20 meter long including wall hooketc complete all as specified and as directed. Make: Jaquar Cat.part No ALD-565 or equivalent model from make Hindware / Prayag. |
| 86 | S&F brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections, packing union and cap,complete, all as specified and as directed by Engineer-in-Charge. Make:Prayag/ Jaquar/ Marc/ Parryware. |
| 87 | S&F CP Brass angular Stop cock,15 mm bore,fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. Make: Prayag Cat part No. 8010 or equivalent model from make Jaquar/ Marc/ Parryware. |
| 88 | S&F 3-Hole Basin Mixer Regular, Table Mounted, Quarter Turn, without Popup Waste System, 20mm Cartridge Size,complete, all as specified and as directed. Make: Jaguar Cat part No.FLR 5189N or equivalent model from Cera/ Parryware |
| 89 | S&F 2-in-1 CP Bib tap 15 mm bore, cast copper alloy, fancy type, with flange, chromium plated, screwed down, high pressure, screwed for iron pipe, complete, all as specified and as directed. Make: Jaguar Cat part No.ORP 10041PM or equivalent model from Cera/ Marc/ Parryware |
| 90 | S&F fancy type single lever high neck basin mixertall body with 155mm extension body fixed spout without popup waste system with 600mm long braided hosescomplete all as specified and directed. Make: Jaquar Cat Part No-KUP-35005 BPMor equivalent model of Cera / Hindware / Prayag |
| 91 | S&F CP over head showers square shape of size 150x150mm with CP shower arm size 400x25x25mm square shape for wall mounted showers wall flange etc., complete, all as specified and as directed. Make: Jaquar Cat.No OHS-CHR-1619 and SHA 455L400 or equivalent model from make Hindware/ Prayag/ Cera. |
| 92 | S&F CP single lever wall mixer 3-in-1 system with provision for bath hand shower and overhead shower with 115 mm long bend pipe connecting legs and wall flange ( without hand & overhead shower)etc complete all as specified and as directed. Make: Jaquar Cat.part No OPP-CHR-15125PM or equivalent model from makeKoheler/ Roca/ Prayag/ Hindware cat part no F200018 . |
| 93 | S&F CP Hand shower 24x24 mm square shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system with flexible tube in chrome finish 1.5m long with nuts complete all as specified and as directed.Make- JaquarCat Part NoHSH- 35537 for hand shower and Jaquar Cat Part No-SHA-571 for flexible tube or equivalent model from make Parryware /prayag/Cera |
| 94 | S&F CP soap dish holder fixed on wall with CP screwsetc complete all as specified and as directed. Make: Jaquar Cat. part No AKP-35731P or equivalent model from make Hindware/ Prayag/ Cera. |
| 95 | S&F Towel rack with lower hangers, stainless steel, 600mm long between flanges, fixed with stainless steel screws in position, complete, all as specified and as directed. Make:Jaquar Cat Part No-AKP-35781PS or equivalent make of Cera/ Parryware/ Hindware |
| 96 | S&F in repairs, Towel rack with lower hangers, stainless steel, 600mm long between flanges, fixed with stainless steel screws in position, complete, all as specified and as directed. Make:Jaquar Cat Part No-AKP-35781PS or equivalent make of Cera/ Parryware/ Hindware |
| 97 | S&F Toilet roll holder with stainless steel complete all as specified and directed. Make: Jaguar Cat Part No:- AKP-35755PS or equivalent Cera/ Hindware/ Prayag |
| 98 | S&F Towel ring square shape stainless steel, fixed on wall surface with rawl plug and stainless steel screws, complete, all as specified and directed. Make: Jaguar Cat Part No:-AKP-35721Por equivalent Cera/ Hindware/ Prayag |
| 99 | S&F corner glass shelf with bracket, complete, all as specified and as directed by Engr-in-charge. Make: Jaquar Cat Part CAN-1173equivalent in Prayag/ Hindware/ Koheler/ Roca. |
| 100 | S&F brass tower bolts and fixed of100mm length, ISI marked complete all as specified anddirected by Engr-in-charge. |
| 101 | S&F Bevelled edge mirror thickness 5mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and as directed by Engineer-in-Charge |
| 102 | S&F in repairs Bevelled edge mirror thickness 5mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and as directed by Engineer-in-Charge |
| 103 | S&F rotational moulded polyethylene 1000 ltrs capacity water storage tanks, three layered, (ISI marked) colour as directed by Engr-in-charge (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end, complete, all as specified and directed. |
| 104 | S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floors including pvc clamps for securing pipe etc complete all as specified and directed. |
| 105 | S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floor including pvc clamps for securing pipe etc complete all as specified and directed. |
| 106 | S&F110mm bore PVC (SWR) bend with or without access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed. |
| 107 | S&F75mm bore PVC (SWR) bend with or without access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed. |
| 108 | S&F75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 109 | S&F75mm bore PVC (SWR) vent cowl, complete, all as specified and directed. |
| 110 | S&F GI tubing 15mm dia. medium gradewith all fittings fixed in wall, ceiling or laid under floor with necessary clamp orhook, including all fittings, complete, all as specified and as directed. |
| 111 | S&F GI tubing 20mm dia. medium gradewith all fittings fixed in wall, ceiling or laid under floor with necessary clamp orhook, including all fittings, complete, all as specified and as directed. |
| 112 | M&L for cutting chases, of girth not exceeding 10cm for concealed water tubing or concealed conduit wiring etc, in stone/ brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3to ends or edges of landings, steps, cills, sunshades shelves, lintels etc.,complete, all as specified and as directed Engr-in-incharge. |
| 113 | M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil, complete, all as specified and directed. |
| 114 | M&LFrench polish, one coat over old woodenpaintedsurfaces of any description over 10 Cm width or girth including necessary preparation of old surfaces with a coat of wood filler with two or more coats complete all as specified and as directed. |
| 115 | M&L for preparation of old surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer, complete, all as specified anddirected by Engr-in-charge. |
| 116 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 117 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, over a coat of red oxide, complete all as specified and directed. |
| 118 | M&L forpreparation of newly or previously undecorated plastered surface of wall and applying oil bound distempertwo coats of approved shadeover one coat of compatible wall primer over and including 1mm thick wall care putty to achieve smooth surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 119 | M&L for complete removal of existing treatment of walls, preparing the surfaces even & smooth by rubbing with wire brush or sand paper and applying two coats of distemper oil emulsion over and including 1mm thick wall care putty to achieve smooth surfaces, complete, all as specified and as directed by Engineer-in-Charge. |
| 120 | M&L for preparation of old decorated surface of ceiling and applying oil bound distempertwo coats,over and including 1mm thick wall care putty to achieve smooth surfaces, complete, all as specified and as directed. |
| 121 | M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned cement base paint after priming the surface with water complete all as specified and directed by Engineer-in-Charge. |
| 122 | M&Lfor preperation of new or previously untreated surface, applying two or more coats of 100% premium acrylic emulsion paint having VOC (volatile organic compound) less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 Sqm on new or previously untreated surface over 1mm thick wall care putty, complete, all as specified and as directed by Engr-in-charge. |
| 123 | M&Lfor applying two or more coats (over 1mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface on external surfaces including complete removal of exixting treatment over wall and preperation of surfaces even and smooth, complete, all as specified and directed by Engr-in-charge. |
| 124 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceilingand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga |
| 125 | Description all as per item No. 124 here in before but for socket outlet point 5 Amp on same board. |
| 126 | Description all as per item No. 124 here in before but for socket outletpoint 5 Amp on Independent board. |
| 127 | Description all as per item No. 124 above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 128 | Supply and fixing modular switch 1 way 6A module 230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor, Vinay |
| 129 | Supply and fixing modular switch 1 way 16A module 230/250 volt , AC supply,ISI Marked, with white cover plate with frame complete all as specified and directed. Make:Cona , Plaza, Anchor . |
| 130 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed.ake:Cona , Plaza, Anchor, Vinay |
| 131 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make:Cona , Plaza, Anchor . |
| 132 | Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completecomplete pre wired fixed to wallwith 2 nos PVC block of suitable size complete all spcifided and directed. |
| 133 | S & F Mirror wall mounted LED batten fittings with all accessories 1X 12 Watt LED 6000K, extruded polycarbonate, integrated electronic driver and fixed to wallcomplete all as specified and as directed including taking down old unserviceable light fittings Make- Philips cat Part 31403 12-Watt LED picture Light (Gold) |
| 134 | Supply and fixing LED security Buildinglight LED 35 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDLequivalent model as in Surya / havells . |
| 135 | Supply and fix MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S. |
| 136 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity "C" seriescomplete all as specified and directed including taking down old one. |
| 137 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB"sincluding taking down old one. |
| 138 | Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.. (Note:MCB SPshall be measured and paid seperately under appropriate items of this schedule .Note:Copper thimble shall be used for connection of cable . |
| 139 | Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star ratedvertical type includng fixing of bolts , nuts grouted into the wall, and necessary cement work , making good of disturbed surface of wall, giving electric and water connection and testing after installation. Make : Havells cat part no - GHWCAMTWH025: /LG/Ronald. |
| 140 | S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia. Make: Prayag or equivalent in Polytuf/ Havells/ Sona. |
| 141 | Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe. |
| 142 | S&F bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 143 | S&F angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixing of size 15mm. |
| 144 | S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed |
| 145 | Supply and fix MCCB TPN, 240 Volts, 40 to 63Amps, 10 kA rupturing capacity415 Voltscomplete all as specified and directed including taking down old one. |
| 146 | M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium gradeISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old unserviceable wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of6 sqmm cable and one run of PVC conduitshall be measured as one RM. (ii)Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 147 | Supply and fixing modular sockets 6A2/3 pin combined 2 module 230/250 Volts,50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed.ake:Cona , Plaza, Anchor, Vinay |
| 148 | S & F Wall bracket decorative LED fitting 2 light opal glass with chrome finishing warm white /white type with lamp12 Watt complete with necessary connection complete Make- Jaquar Cat part KCH-CHR-MB160275532B |
| 149 | S & F Exhaust fan 230 volts , 300mm, heavy duty steel body includingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wallincluding taking down old one Make Bajaj/Havell"s/CG. |
| 150 | Supply and fixing LED 3 light clear glass, rose gold mesh with chrome finishingpendent IP65 protection, better optics for uniform distribtion warm white / white type complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete. MAke- Jaquar cat No- JNL-CHR-MD 160020053B |
| 151 | S & F Philips 11.5 WattsSmart Lightstrip Plus with suitable size LED driver warm white / white type and fixed in ceiling / wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings Make- Philips Cat part No- 915005240701 |
| 152 | S & F Slim desingn LED recessed round/square type down lighter 06 watt warm white / white type flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified Make- CG Cat Part No- LCDEP-06-WW |
| 153 | S & F Slim desingn LED recessed round/square type down lighter 12 watt warm white / white type flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified Make- CG Cat Part No- LCDEP-12-WW |
| 154 | S & F recesss mounted low glare luminaire 28 Watt PLUTO NEO 2 X 2 complete warm white / white with all accessories including taking downold unserviceableone Make HAVELLS /Philips/Bajaj/CG |
| 155 | S&F lamp holder, insulated body, with back plate for batten fittingcomplete. Make- Havells/anchor/Legrand. |
| 156 | S&F integral decorative LED bollard 8 watt with lamp and all accessories including taking down old unserviceable one MakeHavells Cat Part No BAMPOOBL8WLED830SSYMTOPCM LED or equivalent Philips / CG. |
| 157 | Supply and fix MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S. |
| 158 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling inISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old unseviceable wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of6 sqmm cable and one run of PVC conduitshall be measured as one RM. |
| 159 | Supply and fixing Flexiable cable 6 Sqmm Weather proof single flat twin core cable including pvc pipe 20 mm dia clmple nut bolt etc. complete all as specified and directed |
| 160 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
| 161 | AUTOMATIC POWER FACTOR CORRRECTION PANEL:Supply, fixing, connecting and testing of OEM Manufactured APFC Panelcapacity 50 KVAR (Output) @ 440Vac. The stage ratings shall be 1x10kVAr + 2x20kVAr.The APFC Panel shall be fully type tested at an Independent Laboratory and shall comply withIEC 61439-1&2 and IEC 61921 OrIS-16636-2017.The degree of protection of enclosures system of the APFC Panel shall be min. IP54outdoor type in accordance with IEC 60529.bank conforming to IS13341:1992 & IS 13440:1993 floor mounted design, weather, dust and vermin proof suitable for humidity up to 95%. Average daily temperature: +35°C max, Ambient temperature: -5°C to 40°C, Maximum altitude: 2000 m above sea level Approved Makes- ABB / Schneider / Siemensmake or equivalent. The OEM"s specified cannot authorize any other partners / sub vendors to manufacture APFC Panels on their behalf. The APFC Panel manufactured by OEM"s only will be accepted & factory acceptance test ( FAT ) will be carried out at OEM"s plant only. As equipment shall be comprising of the following:- |
| 162 | Insulated bus barassembly made from Aluminium and rated of 200 Amps capacity. The short circuit withstand capacity shall be 36 KA / 1 Sec (Icw) for the main bus bar and the rated impulse withstand voltage shall be 8 KV. |
| 163 | The incomer of the APFC Panel shall be aEasypact CVS 100A 3P MCCB 36KA,TMD release with Over-Load & Short-Circuit protection, Ics = 100% Icu, MCCB shall have standard extended rotary handle, spreaders, phase barrier. MCCB shall be of certified designconfirming toIEC 60947-1,2 & 3. |
| 164 | Flush Type 96x96MM AC Ammeter (-/5A) & Voltmeter (0-500V) with Inbuilt Sector Switches, LED Display - 1Each,3 Nos CTs Cast Resin/ Moulded Case 250/5A for Ammeter, 3 Nos CTs Cast Resin/ Moulded Case for IMFCR as per the load of Main Transformer Panel, RYB Phases + MCCB On/Off/Trip Indications LED Type, Control Fuses withGlass Carrier Fuses -appropriate rating. |
| 165 | Capacitor Units: The capacitor unit shall be metalized polypropylene film with Zn / Al alloy. The capacitors shall be encapsulated in an aluminium can. The capacitor unit shall have a rated voltage of 440V and shall have a maximum over current capacity of1.8 In & Peak inrush Current 250In. The capacitor unit shall have a built in 3 phase over pressure protection and shall have discharge resistors (50V in 1min) factory fitted and shall be tamper proof. Capacitance Tolerance -5%, +10%. Maximum permissible over voltage 1.1 x Un, 8 h every 24 h. The capacitor unit shall be of certified design confirming to IS-13340-1993, 13341-1992 & IEC -60831-1&2. |
| 166 | Short-circuit and Overload Protection: Each stage of the APFC Panel shall have a suitably rated MCCB for short-circuit and overload protection. The over-current setting shall be adjustable & Breaking capacity Ics=> 36kA. The MCCB shall be of certified design confirming to IEC 60947-1, 2 & 3. |
| 167 | Stage Contactor: The power contactors shall be rated for 230 Volts AC and shall be 3-pole type and shall be employed for switching "on" and switching "off" operations in capacitor banks. The contactor shall be AC- 3 duty type.The contactor shall be of certified design confirming to IEC 60947-1 & 4-1. |
| 168 | Ventilating fans of required size shall be used to dissipate the heat produced by the capacitor bank components like the capacitor units, reactors, contactors, breakers etc. The capacitor banks should be of type tested design and temperature rise test report of the capacitor bank performed at an independent laboratory should be submitted along with the offer. |
| 169 | Note:-The APFC Panel described as above complete in all respect as per specification enclosed, up to the entire satisfaction of engineer In Charge.To ensure safety, reliability and accountability of component co ordination, all the major capacitor bank components such as capacitor units, de tuning reactors, PF controllers, circuit breakers, contactors and the enclosure system called for in this specification should preferably be from a single manufacturer. The OEM shall preferably manufacturer PFC components and switchgear.The OEM"s specified cannot authorize any other partners / sub vendors to manufacture APFC Panels on their behalf. The APFC Panel manufactured by OEM"s only will be accepted & factory acceptance test ( FAT ) will be carried out at OEM"s plant only. |
| 170 | All as per item no 161 but capacity 100 KVAR.The stage ratings shall be 1x10kVAr + 2x20kVAr + 1x50kVAr with200 Amps 4 Pole incoming MCCBs. |
| 171 | All as per item no 161 but capacity 150 KVAR. The stage ratings shall be 2x12.5kVAr + 1x25kVAr + 2x50kVArwith400 Amps 4 Pole incoming MCCBs, |
| 172 | All as per item no 161 but capacity 200 KVAR. The stage ratings shall be 2x12.5kVAr + 1x25kVAr + 3x50kVArwith400 Amps 4 Pole incoming MCCBs. |
| 173 | Supply and fixing LED security Buildinglight LED 45Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete.Make- Havells/Philips/ CromptonCat NO- CRP-409-45-57-SL-GL-NSG |
| 174 | Supply and fixing LED security Buildinglight LED 60Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete.Make- Havells/Philps Crompton Cat NO- CRP-409-45-57-SL-GL-NSG |
| 175 | M&L for THREE RUNS of single core2.5 Sq.mm sizePVC insulated , un sheathed , multi stranded aluminium conductor cables in 20 mm PVC conduit including clampand connecting up to streetlight fitting . |
| 176 | Supply & fixing factory made IP-65 (Dust and power jet proof according to IEC60529) transparent street light junction box of size 340x160x90 made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant , fire retardant , fire retardant having high impact totally insulated, UVresistant ) having high grade gasket made of polyurethane inculding one nos MCB SP 6 Amps for control street light with two cable gland for cable size 10/16 sqmm etc and fixing on pole with MS flat iron of size 20X3mm with necessary nut & bolts complete all as specified and directed Make:Hensel /Sintex |
| 177 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth strip 32x3.15mm by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
