Proj No 127 Chc Narikkunicompound Wall And Gate Construction Gate With Pillar
Tender Value
8.92 Lakhs
Estimated cost
Bid Submission
21 Mar 2022
0 days left
EMD
22320
Bank guarantee accepted
Document Fee
1790
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
narikkuni → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proj No 127 Chc Narikkunicompound Wall And Gate Construction Gate With Pillar
BOQ
| Sl. No. | Item Description |
| 1 | COMPOUND WALL AND GATE |
| 2 | 15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar |
| 3 | 15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 4 | 15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 6 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 7 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 8 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 9 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). |
| 11 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 12 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 13 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 14 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 15 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 16 | 50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. |
| 17 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 18 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 19 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 20 | 9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding |
| 21 | 13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to givean even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . |
| 22 | od1661376/2021_2022 : <br>Designing, fabricating, testing, installing and fixing in position Curtain Wall with<br>Aluminium Composite Panel Cladding including aluminium frame work , with open grooves for linear as well<br>ascurvilinear portions of the building , for all heights and all levels etc. including:<br>a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen<br>principle as required, proper drainage of water to make it watertight including checking of all the structural<br>and functional design.<br>b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan<br>shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material<br>consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm<br>thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF /<br>Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service)<br>coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone<br>sealant, backer<br>rods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations<br>and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of<br>approved make in SS 316, Nylon separators to<br>prevent bi-metallic contacts all complete required to perform as per specification and drawing The item<br>includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the<br>individual components for testing in an approved laboratory, field tests on the assembled working curtain<br>wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium<br>composite panel cladding till the handing over of the building for occupation. Base frame work for ACP<br>cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with<br>aluminium composite panel cladding, having all the performance characteristics all complete , as per the<br>Architectural drawings, as per item description, as specified, as per the approved shop drawings and as<br>directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the<br>external face of the curtain wall with Aluminum Composite Panel Cladding (including width of<br>groove) with aluminium frame work , shall be measured in sqm. up to two decimal places. |
| 23 | od1663770/2021_2022 : :supplying and fixing of stainless steel brushed metal name letters of 50 cm (24 guage<br>letters and 26 guage frame) including all charges (malayalam letters) |
AI Tender Summary
Tender Timeline
Mar 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender