|
| 1 | DOORS AND PARTITIONS |
| 2 | Note :- |
| 3 | All aluminum sections shall be of Jindal make and 50micron silver/color anodizing. |
| 4 | All 6 mm thick glass mentioned in this section are LOW-E reflective glass. |
| 5 | Sample aluminum members to be approved beforeProcurement |
| 6 | Unless otherwise specified rates quoted shall include the cost of the following :a) Cost of all materials, labour, equipment / tools & plants required, conveyance, performance, quality and health, safety & environmental standards, infrastructure facilities required etcc) Cleaning and watering immediately before laying the floor as directed.e) Cutting, rubbing and polishing where applicable.f) Working at all heights, levels or steps as called for.g) Hire of all equipments and running costs of all equipments required.h) Keeping the surface wet for a minimum period of one week.i) Receiving all materials, unloading, storing, conveying to work site & fixing in position.j) Cleaning tiles, waxing and/or acid washing where required.k) Grouting (tile joint filling) with matching coloured cement and / or pigmented white cement to match the colour of the tiles or stones. |
| 7 | PARTITION |
| 8 | Providing and fixing in position 10mm thk toughened Glass partitions of with plywood framing of 40mm with glasses of size 600x600 upto height 3.0m including all patch fittings as per detail drawing and specifications. |
| 9 | Providing and fixing Wooden Partition including 19 mm plywood with veneer finish Partition framework to be cladded on both sidesone layer of 12mm thick plywood with tapered edgein line and level screw fixed with screws @ 300mm c/c with staggered joints to avoid through joints and finished with veneer as per selection. Infill:As an acoustic requirement contractor is to consider partition frame cavity to be packed with 50mm thick rockwool blanket of density 48kg/m3 suitably affixed to partition framework using GI binding wire and duct tape. |
| 10 | DOORS |
| 11 | Fabricating & fixing Single leaf 12 mm thk toughned glass doorwith frame consisting of.a)Opening size : 1000mm x 2450mm / 1200 x 2450, Number of Leaves : 1, b)Door Frame Section, Frame will be as per Dorma alexa specifications, d)Hardware : Handle :PHH-H Shape handle-KICH, Size 300mm. Hinges : Dorma junior office classic, Lock : Dorma Junior Office classic Lock, FLOOR SPRING : Dorma make, The door frame should be fixed to the partition with 8mm flat head wood screws from behind or the frame is fixed to the masonry wall using M.S hold fast with clear anti termite treatment for the concealed partition of the frame. |
| 12 | Fabricating & fixing Double leaf 12 mm thk toughned glass doorwith frame consisting of. a)Opening size : 1500mm x 2450mm Number of Leaves : 2, b)Door Frame Section, Frame will be as per Dorma alexa specifications, c)Hardware : Handle :PHH-H Shape handle-KICH, Size 300mm., Hinges : Dorma junior office classic, Lock : Dorma Junior Office classic Lock, FLOOR SPRING : Dorma make, The door frame should be fixed to the partition with 8mm flat head wood screws from behind or the frame is fixed to the masonry wall using M.S hold fast with clear anti termite treatment for the concealed partition of the frame. |
| 13 | Providing & fixing single leaf solid core wooden flush door (water proof) shutter 40mm thick including all approved quality with chromium plated fixtures and fasteners like hinges, Door Closer, Door Stopper, mortoise lock, handle, glass view panel, etc all of Dorma make as per drawings & specifications including both side laminate of 1MM thk. as per specification etc. Complete. |
| 14 | ROLLER BLINDS |
| 15 | Providing & fixing Semi transparent roller blind with 60 % Blackout the following specs. with VISTA make or approved equivalent. Fabric description: Black-out material fibre-glass coated fire retardant fabric, 12 mils thick, 62 threads per sq in., 0.750 lbs per sq in. (441g per sq mt.), Fabric width: As per site condition with up-stand along the length of the dry pocket, removable type for servicing shades, Operation: Manual., Configuration: Single band, Closure with up-stand along the length of the dry pocket, removable type for servicing shades, Dimension: Continuous Length ( Varying) , X Height |
| 16 | PLASTERING WORK |
| 17 | Note |
| 18 | Providing tips/thiyya on masonary prior to plaster to check plaster line & plumb is must. |
| 19 | Unless otherwise specified rate quoted for all items shall include the cost of the following a) Cost of all materials, labour, equipment/tools & plants required, conveyance, performance, quality and health, safety & environmental standards, infrastructure facilities required etcb) Hacking or scarifying concrete surfaces to be plastered or rendered.c) Preparation of surfaces by raking out joints, wetting the surface etc.d) Providing grooves / band wherever required as per the direction of engineer-in-charge & GFC drawings issued.. e) Work at all heights, levels and situation.f) Providing drip moulds wherever necessary as directedg) Washing floors, cleaning glass and leaving premises clean and tidy.h) Curing for at least 10 days.i) Providing necessary scaffolding, ladder, platform for any height and depth and removing.j) Providing galvanised steel plaster mesh / corner bead for all corners of wall and columns manufactured by M/s. Arpitha Exports or approved equivalent including fixing the same.k) River sand to be used for plastering works. Use of crush sand shall not be allowed for the plastering. |
| 20 | l) Providing plaster in small areas & quantities, narrow width, mitred and returned ends, sunken areas, risers, skirting, making the surface good upto and which may be required for forming good finish. Any additional plaster required to bring the surface to the required level and plumb shall be carried out at no extra cost.m) Screening and washing approved fine aggregates.n) Cement Mortar mixing to be done with onsite batch mixers.o) Handling of cement mortor at work place should be only in Tray (Metal) & not on GI Sheets. |
| 21 | Internal Plaster Back coat - 15mm thickness |
| 22 | Providing and applying backing plaster for dado on internal surfaces 15 mm thick in cement mortar 1:4at all heights & locations for walls, columns, beams etc. including chipping concrete surface, finishing, scaffolding, providing grooves, curing etc complete as directed by Engineer In Charge. |
| 23 | Providing India Gypsum plaster directly on RCC/masonry ceiling/walls at all floors, locations and level in line and plumb including grooves, bands, scaffolding, providing & fixing of chicken wire mesh at the junctions of RCC and masonary using nails, complete as directed. |
| 24 | PAINTING WORK |
| 25 | Providing and applying Birla wallcare white cement based putty fortrue ceiling surfaces etc. Existingsurfaces shall prepared by scraping away any loose particles, dust, etc by washing and scrubbing ,wall to be completely dry before applying the wallcare putty and thenBIRLA WALLCARE CEMENT BASED WALL PUTTYto be applied of thickness 4mm. Surfaces are then sandpapered with (EMERY PAPER NOT LESS THAN 500 ) to achieve a smooth finish applied as directed / as per manufacturers specification. / Or using RJ London Putty |
| 26 | Providing & applying Acrylic Emulsion Paint of Asian/Nerolac of approved shade with two coat of primer,two coat of ready made putty including surface preparation , applying three coats paint mat finish, doing work as per manufacturer specification including cleaning the surface thoroughly with sandpaper, including scaffolding at all level etc. and cleaning of floors, door window frames, covings etc. Complete as directed by Engineer/ Owner. (Final coat will be applied only after completing of all jobs including the other agencies as well.) |
| 27 | FLOORING WORK |
| 28 | Note |
| 29 | Rate is inclusive of chisseling masonary work to flush skirting tile with plastered surface. |
| 30 | Kota stone tile to be sorted out prior to flooring work to maintain same colour/shade. |
| 31 | Unless otherwise specified rates quoted shall include the cost of the following :a) Cost of all materials, labour, equipment / tools & plants required, conveyance, performance, quality and health, safety & environmental standards, infrastructure facilities required etcb) Final preparation of base sub-grade or sub-floor by cleaning all dust / dirt, loose particles, caked mortar dropping by scrubbing with coir or steel wire brushes. Roughening surface if so directed, cleaning with water and keeping surface wet for 12 hours and removing surplus water by mopping before topping is laid and minor trimming of the base toremove undulations.c) Cleaning and watering immediately before laying the floor as directed.d) Providing bedding layer of mortar as specified in the case of slabs, tiles, etc. to correct levels or steps as called for.e) Cutting, rubbing and polishing where applicable.f) Working at all heights, levels or steps as called for.g) Hire of all equipments and running costs of all equipments required.h) Keeping the surface wet for a minimum period of one week.i) Receiving all materials, unloading, storing, conveying to work site & fixing in position.j) Cleaning tiles, waxing and/or acid washing where required.k) Grouting (tile joint filling) with matching coloured cement and / or pigmented white cement to match the colour of the tiles or stones.Basic Rate : To include materail , wastage , taxes delivered at Site l) Tin oxide polish for marble slabs.m) White cement slurry for marble slabs floors at 2.20 kgs per sqm.n) Rate include providing cut out in flooring wherever require, Samples to be submitted forapproval from Architect/Client/PMC before procurement |
| 32 | FLOORING |
| 33 | Providing and fixing Vitrified tile for flooring of approved quality and size with grinding and edge cutting for minimum joint, laid on the bedding of CM 1:6 laid to perfect levelsas required andincluding joint filling with Epoxy grout of approved quality & shedto match the colour of tile, curingetc, complete as directed.(Basic Rate=150/-sqft) |
| 34 | Providing and laying of carpet tile over the specified area with following specification. The floor which receives the carpet to be thoroughly cleaned as per manufacturer\"s specification. The carpet is to be laid over a bed of manufacturer\"s approved adhesive spread evenly over the entire floor. The rate shall include cutting, trimming, fixing and clearing away of residual material to a location as directed. The rate shall also include supplying and laying of a protective layer in PVC or HDPE sheet of 500 microns thickness, held together with scotch tape. The laid carpet to be vacuumed after the removal of protective cover / on commissioning. If after the protective layer is removed and stains observed in the carpet because of in adequate protection, the same shall be shampooed and made good to the satisfaction of the project managers. The measurements of carpet will be the actual laid area. Product Type : C&A/Milliken/Interfaceor approved Equivalent, Sizes:18\"\" MODULAR TILE/36 \" MODULAR TILE, Installation Method:MONOLITHIC/RANDOM TILE INSTALLATION, Surface Texture:Patterned loop, Yarn content: 100%Dynex Nylon, Dye mothed: Yarn dyed, Guage:5/64(50.4 rows/10 cm), Stich per inch: 9.2(362 pu/10 cm), Avg pile ht. :0.187 inch(4.7mm), Soil/Stain protection: Ensure, Static Control:Permanent conductive fiber, width18\"x18\", Backing constriction:ER3 MODULAR TILE.Recycle content: contains between 30-50% over all recycle content including a minimum of 10% post consumer post carpet. Flame resistance:Radiant flooring panel class 1 ASTM E 648,Surface flamability passes CPSC FF1-70, AIR quality:Comply with CRI Green label standards. |
| 35 | DADO/CLADDING |
| 36 | Providing and laying Vitrified tiles of approved quality and size 600 x 600 / 600 x 1200 for dado in required position on with chemical fitting of Laticrete or equal make plastered surface including joint filling with Epoxy grout mixed with pigment to match the colour of tiles, curing, rubbing and polishing complete.(Basic Rate=150/-sqft) |
| 37 | SKIRTING |
| 38 | Providing and fixing in required positions Vitrified tile skirting 75mm high above flooringwith Flush with plaster face matching skirting joints to flooring joints with chemical grout to match colour of tiles including curing and cleaning complete. |
| 39 | Providing and fixing in required positions Wooden tile skirting 75 mm high above flooring with matching skirting joints to flooring joints with cement including curing and cleaning complete. |
| 40 | Providing and fixing in required positions Alluminium skirting of 75 mm high above flooringwith matching skirting joints to flooring joints with cement including making groove between wall & skirting including curing, rubbing, polishing and cleaning complete. |
| 41 | Providing and fixing Granite stone platformof width 0.75m made of1) 35mm or more thkone side polished cuddapaha of width 670mm with polished face @ bottom 2) 20mm thk granite stone of approved colour & texture fixed on it with cement mortar 1:3. 3) Granite Facia of specied width with one side full round molding.including necessary fittings of approved make, cutting & finishing wall & floor, testing etc complete as directed.(Basic Rate for Granite : 220/- sqft) |
| 42 | WATERPROOFING WORK |
| 43 | (Note : Measurement should be taken from wall to wall) |
| 44 | Providing waterproofing treatment to (Make Pidilite/Dr Fixit/Seiko or equal) floors and sanitary blocks (India water proofing or alike) consisting of one layer of B.B. coba of 5 cm to 7.5 cm thick in cement mortar 1:2 sandwiched between two layers of cement mortar 1:4, 20 mm thick mixed with water proofing compound, top finishing coat of cement slurry 6 to 12 mm thick with water proofing compound etc. complete with 32 mm dia. PVC pressure relief pipe of adequate length including waterproofing treatment to 30 cm height of wall in cement mortar 1:4 and covering 7 years guarantee on court fee stamp of Rs.100 with ponding test including all lead, lift etc. complete. Additional Item Spec. No. : As directed by Engineer in charge. |
| 45 | PLUMBING WORK |
| 46 | NOTES |
| 47 | All water supply, plumbing and drainage installations shall be carried out by a licensed plumber only. |
| 48 | All plumbing fittings shall be approved by Architect and all fixing shall be done by using brass screws. |
| 49 | Required pressure pump testing for GI pipe line work including documentation certified. |
| 50 | Required smoke testing for PVC, HDPE, CPVC pipe line workincluding documentation certified. |
| 51 | Required sketches of hidden plumbing/drainage work signed by engineer in charge. |
| 52 | Providing and fixing in position CPVC plumbing pipe of specified diameter of required standard thickness conforming to I.S. 4985 including necessary fittings conforming to I.S. 7834 such as elbows, tees, reducers, clamps, plugs etc. including necessary excavation drilling holes in walls, slabs etc. and making good the surface complete. |
| 53 | 15 mm dia |
| 54 | 20 mm dia |
| 55 | 25 mm dia |
| 56 | Providing & fixing PVC pipe (6 kg/cm2 ) of approved make for Waste water/Rain water disposal including plug bends, tees, single-Y, double-Y, cowl, reducer etc, jointing with solvent, fixing on wall by means of clamps specified in drg, including scaffolding at all levels etc confirming to IS-4985 testing, rectification, complete as directed and instructed. |
| 57 | 75mm dia |
| 58 | 100mm dia |
| 59 | same as item no 3 but heavy duty 40mm dia |
| 60 | Providing and fixing in position Gunmetal Ball Valve of approved quality and make for water supply line including necessary fitting, fixtures etc. complete as directed. |
| 61 | 15mm dia |
| 62 | 25mm dia |
| 63 | 32mm dia |
| 64 | 40mm dia |
| 65 | 50mm dia |
| 66 | Providing and fixing 15mm dia CP Grohe angular stop cock 22005000 with necessary fittings etc complete as directed. |
| 67 | Providing and fixing 15 mm diameter Grohe Wall mounted Kitchen Faucet 31225000 with square flange including pvc flexible pipeincluding necessary sockets, union, nut, testing etc. complete. |
| 68 | SANITARY WORK |
| 69 | NOTES |
| 70 | All sanitary wares colors to match as approved by Architect. |
| 71 | All plumbing fittings shall be of approved by Architect and all fixing shall be done using brass screws. |
| 72 | Prior approval of sample and brand by Architect is necessary before use. |
| 73 | Providing and fixing P.V.C. long arm Nahani Trap of 80mm diameter including SS nahani trap jali in square shape including bend and connecting piece of PVC pipes upto the outside face of the walls including cutting & finishing wall & floor, testing etc complete as directed. |
| 74 | Providing and fixing carysil make SINCORE White Qurtz (21\"x18\"x8\" d) kitchen sinkover granite counter . including Grohe Wall mounted Kitchen Faucet 31225000, CP brass bottle trap with union, 40mm pvc pipe upto floor trap, 15mm dia angle stop cock fusion 29053 with necessary flexible pipe connections and CP brass cap including necessary fittings of approved make, cutting & finishing wall & floor, testing etc complete as directed.(Sink basic price Rs. 6500/- .) |
| 75 | FALSE CEILING WORK |
| 76 | Note |
| 77 | Rate inclusive of providing supports for light fittings, grills, diffusers & cutouts etc.with the frame of Inter mediate Channel of size 45mm. |
| 78 | GYPSUM FALSE CEILING. |
| 79 | Providing and fixing suspended false ceiling consisting of 12.5mm thick Gypsum board suspended on GI framework with staggered joints. GI framework to consist of GI perimeter channels 0.55mm thick 20mm x 30mm along perimeter of false ceiling of ceiling, screw fixed to wall/partition with nylon sleeves and screws @ 600mm c/c. Suspending GI intermediate channels of size 0.9mm thick 45mm x 15mm from the soffit at max dist 1220mm c/c with ceiling angle 0.55mm thick 25mm x 10mm fixed to soffit using proprietary supplied GI cleats and steel expansion fasteners.Ceiling section 0.55mm thick web size 51.5mm and flanges 26mm each and 10.5mm lips are fixed to perpendicular to intermediate channel @ 457mm c/c using connecting clips. 12.5mm thk tapered gypsum board (IS 2095-1982) is screw fixed to ceiling section with 25mm drywall screws @ 230mm c/c. Boards to be finished with proprietary supplied jointing tape and jointing compound and sand papered to achieve a smooth and seamless finish. and 2 coats of primer suitable for plasterboard applied and two coats of Acrylic emulsion paint to be applied as per manufacturer specification.Rate quoted to include vertical drops upto 300mm and all cut-outs required for light fixtures, smoke detectors and other services cut-outs complete as directed by Architect. (Vendor to account for additional supports as required).Rate quoted to include cost of providing support framework formed of perimeter channels for fixing light fixtures, AC grills/diffusers etc., Also to provide concealed perimeter channel support as required to support modular grid ceiling sections at junction between gypboard false ceiling and modular grid tile ceiling. |
| 80 | Providing and fixingArmstrong linear metal Ceilingincluding BPGM2010 - Hook clip for vertical support of Armstrong to be fixed in slotted angle on RCC slab with anchor fastner, including cutting, fixing at all heights and floors as per drawing with necessary architecturaleffects, including marking for layout of cut-outs and making cutouts for light, HAVC grill etc. with required additional framing for cutout, finishing same after fixture fitting etc. complete as directed. |
| 81 | Providingand fixing false ceiling of Armstrong linear Baffle ceiling 40 mm thk with 150 mm height grid of approvedshape and sizes as per drawings including scaffolding if any, all screws and fastening and finishing complete including frame work and runners. |
| 82 | MISCELLENIOUS WORK |
| 83 | Providing & fixing Customised / frosted film of approved make and approved qualitywith all necessary fixtures & fittings all as per drawings & specificationsetc. Complete. |
| 84 | Providing & fixing Wall Paper of approved make and approved qualitywith all necessary fixtures & fittings all as per drawings & specificationsetc. Complete. |
| 85 | Providing and fixing Signages with acrylic of approved make and approved qualitywith all necessary fixtures & fittings all as per drawings & specificationsetc. Complete. |
| 86 | Providing and fixing in position Artificial Green Wallincludingsupporting framing workat all heights etc. complete. |
| 87 | Providing & Fixing in position, Armstrong Acoustical wall Paneling of Woodworks serieswood veneers panel sizes 2440 X 128 X 16 mm perforations G28 including fixing with manufacturer\"s specification (vertical channels and clips etc), including 19mm x 100mm plywood framing of 600 x 600mm grid (to fix vertical channels on it) with supports from walls, including cost of required Cut-Outs & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. |
| 88 | FURNITURE WORK |
| 89 | WORK STATIONS |
| 90 | Linear Work Station |
| 91 | Structure The leg is constructed of Aluminium connectors & Aluminium extrusionThe beam is a well engineered aluminum extrusion ofHE9 grade.The leg and the beam combination forms a self-supporting structure on which the worktop & privacy screen is mounted |
| 92 | Table Top Size: 1000 x 600 mm . 25 mm thickSurface Finish: Prelaminated worktop with PVC Edge Banded |
| 93 | Electrical / Wire Management Race way Below Tabletop - 1 no per workstationFlip top Box -1 no per workstation provided above the worktop |
| 94 | WORK STATION, RECEPTION & PR CABIN CHAIRS |
| 95 | Providing, supplying and placing of chairs with the following specifications: |
| 96 | Chair category: Medium back, Fabric upholstered |
| 97 | Chair seat: ABS plastic for seat |
| 98 | Chair back: Mesh Back |
| 99 | Chair seat and back foam: Moulded foam 55 Kg/sq.cm density |
| 100 | Chair arm rest: Fixed PU arms with metal insert. |
| 101 | Chair mechanism: Revolving and synchro tilt. |
| 102 | Chair height adjustment: Gas lift |
| 103 | Chair base: 660mm dia, 5-Pronged nylon base with twin PU casters. |
| 104 | Chair front locking: Single position |
| 105 | SINGLE SEATER SOFA |
| 106 | Providing, supplying and placing of single seater sofa with following specifications: |
| 107 | Sofa 1770(w)x725(d)x700(h) made out of 75mm x 32mm Silver wood frame work, anti-termite treated with intermediate braces, 50mm wide nawar straps @75mm c/c, springs with jute covers, 75mm thick rubber and 25mm thick superior \"U\"foam, to take proper shapeand curve and upholstered in leatherite, Complete. (Cost of leatherite Rs 4000/Smt), |
| 108 | THREE SEATER SOFA |
| 109 | Providing, supplying and placing ofThree seater sofa with following specifications: |
| 110 | Sofa 1770(w)x725(d)x700(h) made out of 75mm x 32mm Silver wood frame work, anti-termite treated with intermediate braces, 50mm wide nawar straps @75mm c/c, springs with jute covers, 75mm thick rubber and 25mm thick superior \"U\"foam, to take proper shapeand curve and upholstered in leatherite, Complete. (Cost of leatherite Rs 4000/Smt), |
| 111 | DISCUSSION TABLE |
| 112 | Main table Size: 600 MM X 600 MM X 6000HT - 12MM Toughened Glass Top with bevelled edges |
| 113 | Under Structure SS Structure |
| 114 | DISCUSSION TABLE |
| 115 | Main table Size: 1500 MM X 600 MM X 6000HT - 12MM Toughened Glass Top with bevelled edges |
| 116 | Under Structure SS Structure |
| 117 | RECEPTION TABLE |
| 118 | Dimension: 2400mm x 600mm Depth x 1050mm H |
| 119 | Support: Table top to be supported on 1antique finished granite claded on ply frame as shown in drawing.Top Counter: The top counter to be made out of corian clad table top & facia with ply backing Skirting: 100mm Granite Skirting to be providedas shown in the dwg. |
| 120 | Pedestals: 2 nos. of pedestals on castors to be provided finished in approved laminate with 3 nos. of drawers with all hardwares etc complete. Raceway provision: Vendor to provided raceway provision for power and data cables below the table top. |
| 121 | PEDESTAL UNITS FOR WORK STATIONS |
| 122 | Shall be 600mm x 450mm x 650mm height made out of 19mm thick commercial (Greenply or equivalent) plywood with 1.0mm thick approved laminate. The pedestal unitshall consist of 1 drawer and 1 full height shutters including lock, profile handles, etc., of approved make. All internal surfaces of storage shall be finished with 0.8mm thick laminate of approved shade. All revealed edges shall have matching edge binding. The top of the pedestal shall have high density cushion with rexine finish |
| 123 | PR CABIN FURNITURE |
| 124 | Dimension:2200mm x 750mm Depth x 765mm H |
| 125 | Table: Providing & Fixing Cabin furniture. The table top to be formed out of 25mm commercial (Greenply or equivalent)plywood and finished in approved laminate, The edge binding matching to the laminate.Table top to be supported on front apron and plywood gable end. It should have the necessary provision such as Keyboard tray: MS powder coated,wire manager etc. |
| 126 | Side Credenza: Shall be 3000mm x 450mm x 765mm height made out of 19mm thick commercial (Greenply or equivalent) plywood with 1.0mm thick approved laminate. The storage pedestal shall consist of 2 drawers at Top with shutters at bottom including lock, profilehandles, and drawer sliding channels etc., of approved make. All internal surfaces of storage shall be finished with 0.8mm thick laminate of approved shade. |
| 127 | FEATURE WALL |
| 128 | Dimension:3200mm x 450mm Depth x 2550mm H, Table: Providing & Fixing feature wall as per detailed drawing. The unit to contain required framework in aluminum framework. |
| 129 | PART- B |
| 130 | PARTITIONS & DOORS |
| 131 | PARTITIONS |
| 132 | Providing and fixing Wooden Partition including 19 mm plywood with LAMINATE finish, Partition framework to be cladded on both sidesone layer of 12mm thick plywood with tapered edgein line and level screw fixed with screws @ 300mm c/c with staggered joints to avoid through joints and finished with laminate as per selection.Infill:As an acoustic requirement contractor is to consider partition frame cavity to be packed with 50mm thick rockwool blanket of density 48kg/m3 suitably affixed to partition framework using GI binding wire and duct tape. |
| 133 | DOORS |
| 134 | Providing & fixing foldable doors with decorative SS jali (304 brush finish) and 6 mm fixed glass including all approved quality with chromium plated fixtures and fasteners like hinges, Door Closer, Door Stopper, mortoise lock, handle,etc all of Dorma make as per drawings & specifications. as per specification etc. Complete. |
| 135 | PLASTERING WORK |
| 136 | Note |
| 137 | Providing tips/thiyya on masonary prior to plaster to check plaster line & plumb is must. |
| 138 | Unless otherwise specified rate quoted for all items shall include the cost of the following a) Cost of all materials, labour, equipment/tools & plants required, conveyance, performance, quality and health, safety & environmental standards, infrastructure facilities required etcb) Hacking or scarifying concrete surfaces to be plastered or rendered.c) Preparation of surfaces by raking out joints, wetting the surface etc.d) Providing grooves / band wherever required as per the direction of engineer-in-charge & GFC drawings issued.. e) Work at all heights, levels and situation.f) Providing drip moulds wherever necessary as directedg) Washing floors, cleaning glass and leaving premises clean and tidy.h) Curing for at least 10 days.i) Providing necessary scaffolding, ladder, platform for any height and depth and removing.j) Providing galvanised steel plaster mesh / corner bead for all corners of wall and columns manufactured by M/s. Arpitha Exports or approved equivalent including fixing the same.k) River sand to be used for plastering works. Use of crush sand shall not be allowed for the plastering. |
| 139 | l) Providing plaster in small areas & quantities, narrow width, mitred and returned ends, sunken areas, risers, skirting, making the surface good upto and which may be required for forming good finish. Any additional plaster required to bring the surface to the required level and plumb shall be carried out at no extra cost.m) Screening and washing approved fine aggregates.n) Cement Mortar mixing to be done with onsite batch mixers.o) Handling of cement mortor at work place should be only in Tray (Metal) & not on GI Sheets. |
| 140 | Providing India Gypsum plaster directly on RCC/masonry ceiling/walls at all floors, locations and level in line and plumb including grooves, bands, scaffolding, providing & fixing of chicken wire mesh at the junctions of RCC and masonary using nails, complete as directed. |
| 141 | PAINTING WORK |
| 142 | Providing and applying Birla wallcare white cement based putty fortrue ceiling surfaces etc. Existingsurfaces shall prepared by scraping away any loose particles, dust, etc by washing and scrubbing ,wall to be completely dry before applying the wallcare putty and thenBIRLA WALLCARE CEMENT BASED WALL PUTTYto be applied of thickness 4mm. Surfaces are then sandpapered with (EMERY PAPER NOT LESS THAN 500 ) to achieve a smooth finish applied as directed / as per manufacturers specification. / Or using RJ London Putty |
| 143 | Providing & applying Acrylic Emulsion Paint of Asian/Nerolac of approved shade with two coat of primer,two coat of ready made putty including surface preparation , applying three coats paint mat finish, doing work as per manufacturer specification including cleaning the surface thoroughly with sandpaper, including scaffolding at all level etc. and cleaning of floors, door window frames, covings etc. Complete as directed by Engineer/ Owner. (Final coat will be applied only after completing of all jobs including the other agencies as well.) |
| 144 | FALSE CEILING WORK |
| 145 | Note |
| 146 | Rate inclusive of providing supports for light fittings, grills, diffusers & cutouts etc.with the frame of Inter mediate Channel of size 45mm. |
| 147 | GYPSUM FALSE CEILING. |
| 148 | Providing and fixing suspended false ceiling consisting of 12.5mm thick Gypsum board suspended on GI framework with staggered joints. GI framework to consist of GI perimeter channels 0.55mm thick 20mm x 30mm along perimeter of false ceiling of ceiling, screw fixed to wall/partition with nylon sleeves and screws @ 600mm c/c. Suspending GI intermediate channels of size 0.9mm thick 45mm x 15mm from the soffit at max dist 1220mm c/c with ceiling angle 0.55mm thick 25mm x 10mm fixed to soffit using proprietary supplied GI cleats and steel expansion fasteners.Ceiling section 0.55mm thick web size 51.5mm and flanges 26mm each and 10.5mm lips are fixed to perpendicular to intermediate channel @ 457mm c/c using connecting clips. 12.5mm thk tapered gypsum board (IS 2095-1982) is screw fixed to ceiling section with 25mm drywall screws @ 230mm c/c. Boards to be finished with proprietary supplied jointing tape and jointing compound and sand papered to achieve a smooth and seamless finish. and 2 coats of primer suitable for plasterboard applied and two coats of Acrylic emulsion paint to be applied as per manufacturer specification.Rate quoted to include vertical drops upto 300mm and all cut-outs required for light fixtures, smoke detectors and other services cut-outs complete as directed by Architect. (Vendor to account for additional supports as required).Rate quoted to include cost of providing support framework formed of perimeter channels for fixing light fixtures, AC grills/diffusers etc., Also to provide concealed perimeter channel support as required to support modular grid ceiling sections at junction between gypboard false ceiling and modular grid tile ceiling. |
| 149 | CHAIRS |
| 150 | Providing, supplying and placing of chairs with the following specifications: |
| 151 | Chair category: Medium back, Fabric upholstered |
| 152 | Chair seat: ABS plastic for seat |
| 153 | Chair back: Mesh Back |
| 154 | Chair seat and back foam: Moulded foam 55 Kg/sq.cm density |
| 155 | Chair arm rest: Fixed PU arms with metal insert. |
| 156 | Chair mechanism: Revolving and synchro tilt. |
| 157 | Chair height adjustment: Gas lift |
| 158 | Chair base: 660mm dia, 5-Pronged nylon base with twin PU casters. |
| 159 | Chair front locking: Single position |
| 160 | STORAGE UNIT - FULL HEIGHT |
| 161 | Shall be 900mm x 450mm x 2100mm height made out of 19mm thick commercial (Greenply or equivalent)plywood with 1.0mm thick approved laminate. The storage unitshall consist of 2 full height shutters including lock, internal shelf, profile handles, etc., of approved make. All internal surfaces of storage shall be finished with 0.8mm thick laminate of approved shade. All revealed edges shall have matching edge binding. (Prepared at site with inner & outer laminates as per selection). The storage unit to include perforated wooden grill as per design. |
| 162 | COUNTER |
| 163 | Providing, supplying and placing of Prasad counter with following specifications: |
| 164 | Shall be 1850mm x 600mm x 1050mm height made out of 19mm thick commercial (Greenply or equivalent) plywood with 1.0mm thick approved laminate. The Prasad counter shall consist of 4 equal placed drawers including lock, sliding channels, profile handles, etc., of approved make. All internal surfaces of storage shall be finished with 0.8mm thick laminate of approved shade. All revealed edges shall have matching edge binding. |
