Name Of Work: Construction Of Public Health Centre At Edayapattyh / O Kadavur. Under 15Th Finance Commission - 2021-22
Tender Value
30 Lakhs
Estimated cost
Bid Submission
22 Mar 2022
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kadavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Name Of Work: Construction Of Public Health Centre At Edayapattyh / O Kadavur. Under 15Th Finance Commission - 2021-22
BOQ
| Sl. No. | Item Description |
| 1 | Name of the Work :Construction of Public Health Centre at EdayapattyH/O Kadavur |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification (Soil 0.00-0.30) |
| 3 | Supplying and filling in basement with filling Riversand in layer of not more than 15 cm thick well rammed etc., complete. |
| 4 | Supplying and filling in foundation and basement with filling excavated earth in larges of not more than 15 cm thick well rammed waterd and compacted including & conveyance and all labour charges etc., |
| 5 | Cement concrete 1:4:8 mix using 40mm iss HBG metal for foundation & flooring including labour charges etc., complete |
| 6 | Brickwork in CM 1:5 mix using country bricks ground maded of size 23 x 11 x 7 cm including cost and conveyance of all materials etc., complete. |
| 7 | Brick partition walls in Cement Mortar 1: 3 using best quality of country bricks of size 8-3/4\" x 4-1/4\" x 2-3/4\" for foundationandbasementincludingcuring,etc.,complete complyingwith standard specification.Partition walls |
| 8 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X \"3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification. |
| 9 | For Column upto GL toBasement levelGround FloorFor Column upto basement to ground flocLintelHorizontal- outerHorizontal-intermediatevertical -near Roomvertical-clinic and yogavertical- near hall/kitchen-Toilet-Clinic-Toilet-Room-Toilet-kitchenMain door-D1Door bottom -D2Door bottom -D3Door bottom -D4Window bottom-W1Window bottom-W2SunshadeWindow-W1Window-W2SidesRoof BeamRoombeam-HorizontalRoom beam-Horizontalvertical -near Roomvertical -clinic and yogavertical- near hall/kitchenRoof SlabKitchen and Hall -Bottomyoga and ClinicPatientwaitingRoom 1 and 2Roof slab --SidesSeptic tanksides |
| 10 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors etc., complete |
| 11 | RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excludingcentering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixingfan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 12 | Plastering surfaces of RCC itemssuch as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 13 | Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 14 | Providinggranolithicfloor finish in cementconcrete 1: 2:4mixusing 10-12mmISS metal to 25mm thick includingcost and conveyanceof all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum |
| 15 | Paving the flooringwith special type of flooringtiles (Cement based Hydraulicallypressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thickincludingcost and conveyanceof all materials to site and all labour chargesetc complete for 10 cum |
| 16 | Dadooing walls withColor glazedtiles of size 150x150x6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 17 | FlooringwithVitrifiedtilessize6O0x6OOx8mmlaid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor includingcutting the tiles to the required size with special cutter wherever necessary, layingin position and pointing with white cement mixedwith colouringpigment at the rateof 0.3 Kg. / sq.m. etc., complete complying with standard specification. |
| 18 | Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed etc. |
| 19 | Finishing top roof mix one course machine pressed tiles of size 23 cm x 23 cm x 2 cm approved qty with,CM.1:312 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc |
| 20 | Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc. |
| 21 | Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete . |
| 22 | Painting with ready mixed paint two coats including cost & conveyance to size and all labour charges etc., complete. |
| 23 | Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer. |
| 24 | Main Door D1 |
| 25 | door-D2 |
| 26 | Door D3 |
| 27 | Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer. |
| 28 | door-Toilet D4 |
| 29 | Window 1.50m x 1.30m |
| 30 | Window1.2m x 1.30m |
| 31 | Ventilator 0.90m x 0.45m |
| 32 | Supplying and fixing in position best Indian make White glazed earthed ware Oriyatype Indian Water Closet |
| 33 | Supplying and fixing in position ordinary colour glazed Eropean water closet of best quality and approved make with 100mm\" P\" or\"S\" trap with double flapped rigit P.V.C seat level flushing tank with 10 liters PVC low level Flushing tank |
| 34 | Supplying and fixing white glazed earthen ware Wash hand basin of size 550x400mm |
| 35 | Supplying and fixing following electrical arrangement |
| 36 | Light/ Fan point SD 25 |
| 37 | Concealed Light point SD 26 |
| 38 | Plug point SD 38 |
| 39 | Concealed Power Plug Point SD 40 |
| 40 | Ceiling Fan SD 106 |
| 41 | Exhaust FanSD 114 |
| 42 | 4’ 18W Crystal Glass LED Tube LightZitting |
| 43 | TNEB meter board |
| 44 | Service Connection SD 66 |
| 45 | Earth Connection SD 74 |
| 46 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Mar 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender