watershed development and soil conservation department has published Construction Of Open Gym And Bal Vatika Activity providing and fixing of open gym surfing board , cross trainer , thai chi spinner , seated puller , leg press , sit up board , chest press , pommel horse , double standing twister , standing seating twis. Submission Date for this Tender is 15-03-2022. Wrenches and Drivers Tenders in bhinmal Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SURFING BOARD Providing, and fixing of Surfing Board of size not less than1000mm (Length) x 600mm (Width) x 1400mm.(Height) to build up the muscle groups of the waist, enhance the body coordinationabd flexibility. the main structure frame shall be made from G.I. pipe mimimum of 80 NB“c” class welded with M.S. round Base plate atlestØ250 mm & 10mm thick. the footrests shall be made high quality fiber reinforced Plastic material.High tensile steel with galvanized nut bolts shall be used for assembly The powder coating shall be done with Pure Polyester powder of Ackzonoble/Berger/Nerolac with mimimum60 to 70 micron thickness, complete in all respect fixing the M.S. holdfastin cement concrete to hold the whole structure ,under thedirectionsof Engineer-in-charge to fullfil the functional requirement. the indicative Design/Photo is as per enclosed Photo no.1(the cement concreteand excavation work shall be paid separately). |
| 2 | CROSS TRAINER Providing and fixing of Cross trainer of size not less than1320mm (Length) x 600mm (Width) x 1750mm. (Height) toenhance the mobility of upper and lower limbs and improve the flexibility of joints.the main structure frame shall be made from G.I. pipe mimimum of 80 NB“c” class welded with M.S. round Base plate atlestØ250 mm & 10mm thick.the Hand frame shall be made up of 25 NB“c” classG.I. pipethe footrests shall be madeFrem Aluminium casting material of size not less than 130mm x 310mmx 5mmthikness a mounted onM.S. Plate of size 130mm x 310mmx 5mmthik. high tensile steel with galvaniz (3:23 pm,25/02/2022) prasoon nut bolts shall be used for assembly (3:32 pm,25/02/2022) prasoon perused for assembly. The powder coasting shall be done with Pure Polyester powder of Ackzonoble/Berger/Nerolac Paints With 60 to 70 micron thickness, complete in all respectinculding fixing the M.S. holdfastin cement concretethe directionsof Engineer-in-charge to fullfil.(the cement concreteand excavation work shall be paid separately). |
| 3 | THI-CHI SPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of sizenot less than700mm (Length) x 1000mm (Width) x 1280mm (Height) to increasemobility of shoulder -elbow and hip-knee. the main structure frame shall be made from G.I. pipe mimimum of 80 NB“c” class welded with M.S. round Base plate atlestØ250 mm & 10mm thick.high tensile S.S. nut bolts shall be used for assembly The powder coating shall be done with Pure Polyester powder of Ackzonoble/Berger/Nerolac Paints With 60 to 70 micron thickness, complete in all respectinculding fixing the M.S. holdfastin cement concrete to hold the whole structure. under the directionsof Engineer-in-charge to fullfil the functional requirement. the indicative Design/Photo is as per enclosed Photo no.3.(the cement concreteand excavation work shall be paid separately). |
| 4 | SEATED PULLER Providing and fixing of seated puller of size not less than1900mm (Length) x 740mm (Width) x 1920mm. (Height) to enhance the strength of upper limb and the muscles in chest and back and promate cardio-pulmonary function. the main structure frame shall be made from G.I. pipe mimimum of 80 NB“c” class welded with M.S. round Base plate atlest250 mm & 10mm thick. the Handle frame shall be minimum of 32 NB“c” classG.I. pipe.the seat frame minimum of 32 NB “c” classG.I. pipe. Closing Cape shall be made up og high quality fiber reinforced platticmaterialhigh tensile steel with galvanizednut boltsbe shall be powers ofAckzonoble/Berger/Nerolac Paints With 60 to 70 micron thickness, complete in all respectinculding fixing the M.S. holdfastin cement concrete to hold the whole structure, under the directionsof Engineer-in-charge to fullfil the functional requirement. the indicatvie Design/Photo is as per enclosed Photo no.4.(the cement concreteand excavation work shall be paid separately). |
| 5 | LEG PRESS Providing and Fixing of Leg Prss of size not less than 1840mm (Length)x360mm (width) x1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round vase plate atleast Ø250mm&10mm thick. The Sleeve frame minimum of 100 OD and of M.S. seamless pipe with thickness 5mm. this sleeve should be disassembled from main frame . The footrestsshall be made from casted Aluminum material, having sizes minimum of 130mm X310mm X5mm thick. Closing Caps shall be made up of high quality fiver reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly . The powdercoating shall besone with pure polyester powder of Ackzonoble/ Berger/ Nerolac with 60to 70 micron thickness, complete in all respect including fixing the M.S. hodfast in cement concrete to hold the whole structure, under the directions ofEngineer-in-charge to fullfill the functional reqirements. The indicative Design- Photo is as per enclosed Photo no. 5 . ( The cement concrete and excavation work shall be paid separately). |
| 6 | SIT UP BOARD DOUBLEProvidingand fixing of Sit up Board double of size not les than 1760mm (Length) X 1140mm (Width ) X 660 mm (Height ),to enhance the flexibilty of wholebody.The main structure frame shall be made from G.I. pipe minumum of 80 NB "C class welded with M.S. round base plate atleast 0250 mm & 10mm thick . The remaining frame of the sit up board minimum of 32 mm NB shall be made "c" class GI pipe. The powdercoating shall be done with 60 to 70 micronthickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the wholestructure, under the directions of engineer-in- charge to fullfill the functional requirements. The indicative Design/ Photo is as per enclosed Photo no. 6. (The cement concrete and excavation work shall be paid separately.) |
| 7 | CHESTPRESSProviding and fixing of Chest Press of size not less than 2000mm (Length) X 710mm (width) x 2200mm. (height),to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonaryfunction. The main Sructure frame shall be made from G.I. pipe minimum of 80NB"C" class welded with M.S. round base plate atleast 250mm & 10mm thick. The handle frame shall be made up from atleast 32NB :C" class G.I. Pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S.sheet of size not less than 330mm X300mm X 2mmthicknesss. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tendile steel withgalvanized nuts& bolts shall be used for assembly . The powder coating shall be done with pure polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete to hold the whole structure, under the directions of Enfineer-in- chargeto full fill the functional requirements. The indicative Design/ Photo os as per enclosed Photo no. 7 ( The cement concrete and excavation work shall be paid seperately ). |
| 8 | POMMEL HORSE Providing and Fixing of Pommel Horse of size not less than 2150mm (Length) X800mm (Width) X800mm (Height) , to enhance the flexibility of lower limbs, waist and abdomen. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base Plate atleast 0250 mm & 10mm thick. The handle frame be minimum of 32NB shall be made from "C" class G.I.pipe. Closing caps shall be made up of high quality fiber reinforced Plastic material. High tensile steel with galvanizednuts and bolts shall be used for assembly. The powder coating shall be done with pure polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness,Complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer- in charge to fullfill the functional requirements. The indicative Design/ Photo is as per enclosed Photo no. 8. (The cement concrete and excavation work shall be paid separately.) |
| 9 | DOBLESTANDING TWISTER Providing and fixing of Double Twister Standing of size not less than 1500mm ( Length) X 600 mm (Width)X 1300 mm , to enhance flexibility of waist . The main structure frame shall be mad from G.i. pipe minimum of 80NB"C" class welded with M.S. round base plate atleast 0250mm&10 mm thick . The handle frame is minimum of 25 NB shall be made from"C" class G.L> pipe.The twisterPlateto be fitted on the bottom frame shall be made up of M.S.Round plate of nimimum size 0300mm and 10mm thick. Closing caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with pure polyester powders from Ackzonoble Berber/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure , under the directon of Engineer-In- charge to fullfillthe functional requirements. The indicative Design/Photois as per enclosed Photo no.9. ( The cement concrete and excvation work shall be paidseparately.) |
| 10 | STANDING SEATING TWISTERProviding and fixing of Seating & Standing Twister of size not les than 1700mm (Length) X 540mm (Width) X 1250mm .(Height) , to enhance flexibility of waist. Suitable for people of different ages except children. The main structure frame shall be made from G.I. pipeminimum of 80 NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating &Standing twister be atleast of 32 NB, 50NB,and 25NBshall be made from "C"class G.I. pipe.The handle frame of seating & standing twisterof minumum 25NB &Foot restingframe of seating side shall be made from "C" class G.I. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up M.S. Round plate of minumum size 300mm diameter and 10mm tickness. Closing Caps shall be made up ofhigh quality Fiber reinforced Plastic Material. High tensile steel with galvanized nuts & bolts shall be used for assembly . The powder coating shall be done by pure Polyester powder of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the direction of Engineer- in- charge to fullfill the functonal requirements . The indicative Design/Photo is as per enclosed Photo no. 10 . (Thecement concrete and excavation work shall be paid separate.) |
| 11 | CHEST CUM SHOULDERPRESS ProvidingandfixingofChestPressCumSeatedPullerofsizenotless than 2000mmLength) x 710mm(Width) x 2200mm (Height), to enhance thestrengthofupperlimbsandthemusclesinchestandshoulder.The main structure frame shallbe made from G.I. pipe minimum of 80NB "C" class weldedwith M.S. roundbase plate atleastØ250 mm &10mm thick. The seats and Back rests to be fitted on the outer frames shallbe made up minimumofM.S.Sheetofsize330mmX300mmX2mumthickness. ClosingCapsshallbemadeupofhighqualityFiberreinforcedPlastic material. Hightensile steel with galvanized nuts &bolts shallbe used for assembly. The powder coating shallbe done with Pure Polyester powders from Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, completeinallrespectincludingfixingtheM.S.holdfastincement concrete to holdthe whole structure,under the directions ofEngineer-in- charge to fullfil the functionalrequirement. The indicative Design/Photo is asper enclosedPhotono.I I.(The cement concrete and excavationwork shall be paid separately) . |
| 12 | PUSH UP BARS ProvidingandfixingofPushUpBarsofsizenotlessthan1220mm (Length)x 550mm(Width)1700mm.(Height),To enhancethestrength and stamina of the body. The main structure frame shall be made from G.I. pipeminimumof80NB "C"class weldedwithM.S.- roundbase plate at least 0250 mm &I0mm thick. The handle frame minimum of 25 NB shall be made from "C" Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts &bolts shallbe used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble/ Berger/ Nerolac Paints with 60to70micronthickness,completein allrespectincludingfixingthe M.S.holdfastincementconcrete toholdthewhole structure ,underthe directions of Engineer-in-charge tofullfilthe functionalrequirement. The indicativeDesign/PhotoisasperenclosedPhotono.12.(Thecement concrete and excavation work shall be paid separately). |
| 13 | FOR SEATER MRG Providing and fixing of For Seater MRG swingof size 4/5 Feet (Diameter), 3 Feet (Height) fabricated with a Center Pipe/ Frame of50NBshall bemade from "C"Class G.I. pipe and FRP material. The bottom shall bewelded with support ofM.S. round plate of Ø250 mm &10mm thickness. The bottom frame of 32NB shall be made from "C" class G.I. pipe. The handle frame of 25NB shall be made from "C" class G.I. pipe. The foundation shouldbe used for fixing is a structure and _shall be made from center pipe of G.I. of 50 NB"C" class welded with M.S. round plate of Ø250 mm &10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). |
| 14 | CIRCULAR SWING FOUR SEATER Providing and fixing ofCIRCULAR SWINGFOUR SEATER of size 6.0 X 5.25 X 5.0 Feet fabricated with a Center Pipe/ Frame of65 NBshallbe made from "C"ClassG.I. Pipe and FRP material. THe bottom shall bewelded with support of M.S. round plate of Ø250 mm& 10mm thickness. The bottomframe of 32NB shall be made from "C"class G.I. pipe. The handle frame of 25NB shall be made from "C"class G.I. pipe. Thefoundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB"C" class welded with M.S. round plate of Ø250 mm &10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanizednuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). |
| 15 | FOUR SEATER SEE SAW Providing and fixing of FOUR SEATER SEE SAWof size 5.5 X 6.25 X 2.5 Feetfabricated with a Center Pipe/ Frame of50NB shallbe made from "C" Class G.I. material. The bottom shall be welded with support ofM.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from "C"class G.I. pipe. The handle frame of 25NB shall be made from "C"class G.I. pipe. The foundation shouldbe used for fixing is a structure and shall be made from center pipe of G.I. of 50NB"C" class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material.High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). |
| 16 | HORSE /DUCK /RABET SPRINGRIDER Providing and fixing ofHORSE SPRINGRIDER of size 3.0 X 2.5 Feet fabricated with a Center Pipe/ Frame of40NB shall be made from "C"Class G.I. material andFRP Material The bottom shall be welded with support ofM.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from "C" class G.I. pipe. The handle frame of 25NB shall be made from "C" class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 40 NB"C" class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shallbe used for assembly. The powder coating shall be done with Pure Polyester powders fromAckzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately). |
| 17 | ???, ???,?????? ??? 1.5 ????? ?? ?????? ?? ????? ???? , ?? ?? ????? , ???? ?????, ??? ?? ??????? , ???? ?????? ?? ???? ???????, ??? ???? ?? ??? ???? ???????? ?? ???: ?????? ?? ???? ??? ??? ??? ????? ?? 50 ???? ?? ???? ?? ????????? ???? ?????, ?????,???? ?????? ??? GKN 2021Jsp item no. 2 (B) |
| 18 | lhesUV dUdzhV 1 lhesUV % 3 jsr % 6 fxV~Vh iRFkj dh20 fe-eh- ukeh; eki dh uhao es feykdj Mkyuk rFkk dwVuk] rjkbZ vkfn lfgr psd Mse@,fudV ds fy;s GKN 2021Jsp item no. 170 (B) |
| 19 | lhesUV dUdzhV 1 lhesUV % 2 ctjh % 4 ,XkzhxsV vuqikr esa iRFkj dh 12 fe-eh- ukeh; eki dh ,XkzhxsV ds lkFk Mkyuk] dwVuk rFkk rjkbZ vkfn lfgr psd Mse@,fudV ds fy;s GKN 2021Jsp item no. 16 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
