Periodic Renewal On Rori Kori To Lower Balwal Road Sub Head P.L 30 Mm Thcik Bituminous Concrte In Km 2.0 To 3.400 Vr003313103. 104 Periodic Renewal On Rori Kori To Lower Balwal Road Sub Head P.L 30 Mm Thcik Bituminous Concrte In Km 2.0 To 3.400 Vr00331310, Kotla-Himachal Pradesh
TDR : 31427546
Tender Notice
BOQ
Expired
Kotla
Himachal Pradesh
Periodic Renewal On Rori Kori To Lower Balwal Road Sub Head P.L 30 Mm Thcik Bituminous Concrte In Km 2.0 To 3.400 Vr003313103. 104 Periodic Renewal On Rori Kori To Lower Balwal Road Sub Head P.L 30 Mm Thcik Bituminous Concrte In Km 2.0 To 3.400 Vr00331310
Name of work:-:-Periodical Renewal on Rori Kori to Lower Balwal road (SH: P/L 30mm thick bituminous concrete in Km. 2/0 to 3/400) VR003313103 and VR003313104 under PMGSY.
Sl. No.
Item Description
1
Providing and applying tack coat with bitumen emulsion (RS-I) after and including cleaning the road surface withhydraulic/mechanical brooms and spraying with emulsion pressure distributor at the rate 0.225 kg (zero point two two five kilogram) per square meter on the prepared Bituminous surface complete as per MORD Technical specification clause 503 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana,Octroi, toll tax, saletax, GST or any other taxes imposed by the Government.
2
Providing and laying 30mm (Thirty millimetre) compacted thick bituminous concrete with min 40-60 TPH (forty- sixty tonne per hour) hot mix batch type/drum type plant with electronic control Grading-II using crushed aggregate 13mm (Thirteen millimetre) nominal size of specified grading premixed with bituminous binder VG-30 (Viscosity Grade-thirty) @ 5.50% (five decimal five zero percent) of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth wheeled roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic type roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MORTH technical specification clause No. 509 and as per directions andentire satisfaction of the Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals.The rates including Royality, Malkhana,Octroi, toll tax, saletax, GST or any other taxes imposed by the Government.
3
Providing and laying of hot applied thermoplastic compound 2.5mm (two decimal five millimeter) thick and 0.10 (zero decimal one zero) meter wide strip in centre line and 0.30 (zero decimal three zero) meter wide strip in zebra crossing including reflectorising glass beads @ 250 gms (two hundred fifty grammes) per square meter area, thickness of 2.5mm (two decimal five millimeter) is exclusive of surface applied glass beads as per IRC: 35 (thirty five) in accordance with ministry of road transport specifications (Latest revision) and IRC code the finished surface to be level, uniform and free from strasks and holes including carriage of all labours, equipments and materials to various location through all modes of tranpottation in all leads , lifts and all incidental charges.The rates including Royality, Malkhana,Octroi, toll tax, saletax, GST or any other taxes imposed by the Government.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
