Street Light And Traffic Signal Blinker Light Work Wirhin Municipal Area Lalsot Street Light And Traffic Signal Blinker Light Work Wirhin Municipal Area Lalsot
Tender Value
28.63 Lakhs
Estimated cost
Bid Submission
22 Mar 2022
0 days left
EMD
57260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lalsot → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Street Light And Traffic Signal Blinker Light Work Wirhin Municipal Area Lalsot Street Light And Traffic Signal Blinker Light Work Wirhin Municipal Area Lalsot
BOQ
| Sl. No. | Item Description |
| 1 | Supply and erection of P.C.C./R.C.C. pole as per REC manual no15/1979 conforming to IS: 2905/1966 as per requirement of sec3 inalignment, including excavation of pit and back filling with stoneaggregate/boulders and soil in 0.45m consolidating each depositedlayer of 0.45m by ramming and watering etc complete in all respect59.5.1 8.0 Mtr long (200 Kg) as per Discom specification |
| 2 | Supply and eraction of GI stay set as per Discom specificationcomplete with long stay rod with anchor plate including stay clampsturn buckle and G.I stay wire tightened through strain insulatorincluding excavation of pit-re-filling etc & exculding cement concreteStay set of dia 16mm,1.8m long stay rod and anchor plate300x300x6.4mm |
| 3 | Supply and fixing of LT porcelain pin insulator as per IS 1445-1997suitable for working voltage 1100 volts including all accessories likehot dip GI forged spindle of 260mm long and nuts etc as reqd as perDiscom specification.120mm x 85mm |
| 4 | Supply and fixing of porcelain shackle insulator as per IS:1443 1979suitable for working on 1100 volts including hot dipped GIaccessories and heavy duty hardwares etc as required as perDiscom specification.100mm x 110mm |
| 5 | Supply and fixing of cross arms as per Discom specification, madeout from angle iron 50mmx 50mmx6mm including all necessarynuts,bolts & clamp etc as reqd.LT Bracket with clamp 600 mm long |
| 6 | Providing & Laying XLPE insulated / P.V.C. sheathedcable of 1.1 KV grade with aluminium conductor Unarmouredof IS:7098-I/1554-1 approved make in groundas per IS:1255 including excavation of 30cmx75cm sizetrench, 25 cm thick under layer of sand, second Classbricks covering, refilling earth, compaction of earth,making necessary connection, testing etc. as required ofsize.16mm |
| 7 | Supply and fixing of LT Connector Type A/B (REC Standard) |
| 8 | P/ F IP-65/ IP-66 protected street light luminaries onexisting bracket. Fixture made from powder coatedsingle piece pressure die cast aluminum housing withheat dissipation fins on housing with high power LEDs Diffuser / glass cover for ensuring IP-65 protection forlamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrateddriver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. Systemlife of 50000 burning hours with 70 % of initial lumensmaintained. Fixture shall be in CE compliance.LED street light fixture 30-40 Watt |
| 9 | Supplying and drawing FR PVC insulated & unsheathedflexible copper conductor ISI marked (IS:694) of 1.1 kVgrade and approved make in existing surface orrecessed conduit/casing capping including makingconnections etc. as required. 2 x 1.5 sq.mmGroup 1 |
| 10 | P & F 4.5 mm thick M.S. traffic post with outer dia. 114.3mm,medium class and confirming to IS:1239(PI) 5Mtr. Long (0.8 Mtr.Below ground level)suitable for fiber cap and M.S. base plate 300mm x 300 mm x 6 mm including excavation of pitand grouting withP.C.C. of ratio 1:3:6 from bottom of the pole and up to 30 cm. abovethe ground level and 40 cm. dia. Including paintingwith rubber paintbelow ground level andred oxide on exposed surface and finishingwith traffic yellow enamel paint in two coats compete asrequired. |
| 11 | SITC of Crystal control Road warning Blinker system with solar panel module with 300mm LED Module of minimum 190 Nos., Blinker Units, Charging circuit, suitable SMF Rechargeable Battery (12 Volt,), including wiring, connections etc. complete in all respect. |
AI Tender Summary
Tender Timeline
Mar 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender