Improvement C.D. Work From Saykheda - Wazar Road ( Vr-03 ) Km 0 / 900 To 2 / 500. Tq Jintur, Dist. Parbhani Improvement C.D. Work From Saykheda - Wazar Road ( Vr-03 ) Km 0 / 900 To 2 / 500. Tq Jintur, Dist. Parbhani
Tender Value
41.95 Lakhs
Estimated cost
Bid Submission
17 Mar 2022
0 days left
EMD
41955
Bank guarantee accepted
Document Fee
6720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jintur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement C.D. Work From Saykheda - Wazar Road ( Vr-03 ) Km 0 / 900 To 2 / 500. Tq Jintur, Dist. Parbhani Improvement C.D. Work From Saykheda - Wazar Road ( Vr-03 ) Km 0 / 900 To 2 / 500. Tq Jintur, Dist. Parbhani
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .DSR I.no. 2.07 [ROAD] |
| 2 | Excavation for catch / side water gutter in Soft rock strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. DSR I.No.2.18[ROAD] |
| 3 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a) 80 mm Metal, By breaking rubble obtained by blasting.(Hand broken). SSR I.No. 50.54 [ROAD] |
| 4 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a) 40 mm Metal, By breaking rubble obtained by blasting.(Hand broken). SSR I.No. 50.55 [ROAD] |
| 5 | Supplying soft murum at the road site, including conveying and stacking complete.SSR I.No. 2.29b[ ROAD] |
| 6 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. DSR I.No. 2.29a [ROAD] |
| 7 | Spreading 80/40 mm. metal for road side including sectioning etc. complete as directed by Engineer in charge. Spec. No. :S.S.R. I.No. 50.58[ROAD] |
| 8 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. SSR I.No. 2.30 [ROAD] |
| 9 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. DSR IO.No. 2.31. [ROAD] |
| 10 | Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.DSR I.no. 50.59 [ROAD] |
| 11 | Compacting the sub grade/gravel/oversize metal (100 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.SSR I.No. 50.61 [ROAD] |
| 12 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of contractor, work completion and liability period etc, having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25m) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages / symbos etc with approved colour shade paint complete, on M.S. angle of size 3 x 35 x 3 mm frame with properly cross braced M.S angle of size 35 mm x 35 mm x 3 mm duly painted including two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling transportatiion, and labour etc complete Spec. No. As directed by engineer in charge MORTH 801 S.S.R. I.No. 6.96, Page. No. 79.[ROAD] |
| 13 | Royalty charges[ROAD] |
| 14 | Providing Quality Control Test - Water absorption, Specific gravity, impact value, crushing value Sr.No. 2. P.No. 587. [ROAD] |
| 15 | Providing Quality Control Test -40 mm metal [ROAD] |
| 16 | Excavation for foundationin earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directedetc. complete.DSR I.No. 12.02[CD WORK] |
| 17 | Providing and filling in the foundation with sand of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) DSR I.no.21.39 [CD WORK] |
| 18 | Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc complete. DSR I.No. 11.01[CD WORK] |
| 19 | Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) DSR I.No. 11.04[CD WORK] |
| 20 | Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) DSR I.No. 11.02[CD WORK] |
| 21 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. DSR I.No. 11.11.[CD WORK] |
| 22 | Providing and laying in situ / ready mix / ready mix CC M10 of trap/ granite/ quartzite/ gneiss metal in the hollow of the steel curbs including compacting by vibrating and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) DSR I.No.12.29 [CD WORK] |
| 23 | Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) DSR I.no. 14.39[CD WORK] |
| 24 | Royalty charges[CD WORK] |
| 25 | Providing Quality Control Test - M-10 Cube Test [CD WORK] |
AI Tender Summary
Tender Timeline
Mar 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender