Public Works Department-PWD has published Construction Of Kailasahar District Jail At Kailasahar, Unakoti District, Tripura Sh Construction Of I 100 Seated Prisoners Ward Male Ii 25 Seated Prisoners Ward Female Iii 10 Seated Prisoners Cell Iv Administrative Block Balance Work 3Rd Call. Submission Date for this Tender is 07-04-2022. Civil Work Tenders in kailashahar Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SUB-HEAD : EARTH WORK |
| 2 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil |
| 3 | (i) By manual means |
| 4 | Supplying chemical emulsion in sealed containers including delivery as specified. |
| 5 | (i) Chlorpyriphos/Lindane emulsifiable concentrate of 20% |
| 6 | Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) and continuous chemical barrier under and alround the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth of which apron is to be laid, surroundings of pipes and conduits etc. complete as per specification. The work should be carried out as per IS: 6313 (Part II)- Latest revision [Plinth area of the building at ground floor only shall be measured for payment] : |
| 7 | (i) With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. |
| 8 | SUB-HEAD : CEMENT CONCRETE WORK |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level. |
| 10 | (i) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | (ii) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 12 | (iii) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 13 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 14 | (i) Foundations, footings, bases for columns. |
| 15 | Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement. |
| 16 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 17 | SUB-HEAD : RCC WORK |
| 18 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement. - All work upto plinth level. |
| 19 | (i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 20 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- |
| 21 | (i) RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase. - 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand)etc. complete, excluding the plastering of jambs, sills and soffits. |
| 23 | (i) 50 mm thick |
| 24 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete workin string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including he cost of reuired centering shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). |
| 25 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 26 | (i) Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 27 | (ii) Stairs (excluding landings) except spiral-staircases with wooden plank |
| 28 | Providing and fixing in position 12mm thick bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. |
| 29 | Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall treatment. |
| 30 | (i) Aluminium fluted strips 3.15mm thick : 200 mm wide |
| 31 | SUB-HEAD : BRICK WORK |
| 32 | First class brick work in foundation and plinth including cost of all materials as required complete. |
| 33 | (i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 34 | (ii) In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 35 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete. |
| 36 | (i) In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 37 | Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- |
| 38 | (i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 39 | Extra for providing & placing in position 2 nos 6mm dia MS bars at every 4th course ofhalf brick masonry work including anchorage in joints of 75mm in each side in superstructure for all levelincluding cost of all materials as required complete:- |
| 40 | (i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 41 | Extra for providing & placing in position 2 nos 6mm dia MS bars at every 6th course offull brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:- |
| 42 | (i) In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 43 | SUB-HEAD : MARBLE WORK |
| 44 | Providing and fixing 18 mm thick plain marble stone, mirror polished, machine cut for, kitchen platforms, vanity counters, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing etc. complete at all levels as required:- |
| 45 | (i) Rajnagar Plain white marble/ Udaypur green marble/ Zebra black marble or equivalent duly approved:- - Area of slab upto 0.50 sqm. |
| 46 | Extra for providing edge moulding to 18 mm thick marble stonecounters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:- |
| 47 | (i) Marble work. |
| 48 | Providingandfixing18mm thick stoneslabtablerubbed, edgesroundedand polishedofsize75x50cmdeepand1.8cmthickfixedinurinal partitions by cutting a chase of appropriate width withchasecutter and embeddingthestoneinthechasewithepoxygroutorwithcement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 6 mm nominalsize)as perdirection ofEngineer-in-chargeandfinished smooth including rubbing, curing etc. complete at all levels as required (measurement should be of exposed finished work):- |
| 49 | (i) White Agaria Marble Stone of approved shade or equivalent duly aproved. |
| 50 | SUB-HEAD : WOOD WORK |
| 51 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : |
| 52 | (i) Sal wood |
| 53 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. |
| 54 | (i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 55 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. |
| 56 | (i) Fixed to openings /wooden frames with rawl plugs screws etc. |
| 57 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 58 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 59 | (i) 300 x 16 mm |
| 60 | (ii) 250 x 16 mm |
| 61 | Providing and fixing ISI marked aluminium tower bolts anodised (anodised coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete as per clauses of Chapter - 9 of CPWD specification. |
| 62 | (i) 300 x 10 mm |
| 63 | (ii) 250 x 10 mm |
| 64 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 65 | (i) 125 mm |
| 66 | (ii) 100 mm |
| 67 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 68 | (i) Single rubber stopper |
| 69 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. |
| 70 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 71 | Providing 50 × 50 × 50 mm Gamair wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement: 3 fine sand) and making good the walls etc. |
| 72 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. |
| 73 | SUB-HEAD : STEEL WORK |
| 74 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys& with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings,including applying a priming coat of approved steel primer etc. complete as required. |
| 75 | Providing and fixingfan clamp type-Iof 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 76 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:- |
| 77 | (i) In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete. |
| 78 | (ii) In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 79 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. |
| 80 | SUB-HEAD : ALUMINIUM WORK |
| 81 | Providingandfixingaluminiumworkfordoors,windows,ventilators, stair railing including hand rail andpartitionswithextrudedbuiltupstandardtubularsections/ appropriateZsectionsandothersectionsofapprovedmake conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws orwithfixingclips,orwithexpansionholdfastenersincluding necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawingandthedirectionofEngineerincharge.(Glazingand paneling to be paid for separately) :- |
| 82 | (i) For fixed portion of approved quality:- - Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15). |
| 83 | (ii) For shutters/ sliding shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately ):- - Anodisedaluminium(anodisedtransparentordyedto requiredshadeaccordingtoIS:1868,Minimumanodic coating of grade AC 15). |
| 84 | Providing and fixing glazing of approved quality in aluminium doors,windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge :- |
| 85 | (i) With glass/float glass panes of 4.0 m thickness ( weight not less than 10.0 kg / sqm ) |
| 86 | (ii) With glass/ float glass panes of 5.5 m thickness ( weight not less than 13.50 kg / sqm ) |
| 87 | Providing and filling the gap in between aluminium frame and adjacent RCC / brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge:- (i) Upto 5 |
| 88 | Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-in-charge:- |
| 89 | (i) 205 x 19 mm |
| 90 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality completeas per direction of Engineer-in-charge:- |
| 91 | (i) Anodised aluminium of grade AC 15 ). |
| 92 | SUB-HEAD : FLOORING AND SKIRTING WORK |
| 93 | Providing and fixing 18 mm thick Marble stone (area not less than 0.1sqm each) in floors over 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishingcomplete. |
| 94 | (i) Raj Nagar Plain marble |
| 95 | Providing and fixing Marble tiles in skirting, risers of steps, dado etc. ( upto 2 m height ) over 12 mm thick bed ofcement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade complete. |
| 96 | (i) 8mm thick Rajnagar marble tiles (polished) |
| 97 | Extra for providing and fixing glass strips in joints of terrazo flooring complete. |
| 98 | (i) 40 mm wide and 4 mm thick. |
| 99 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 100 | Providing and laying 1st quality ceramic glazed floor tiles 300 x 300 mm conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in colours, shades such as white, ivory, grey, fume red, brown over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 101 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. |
| 102 | (i) 40mm thick. |
| 103 | Extra for making chequers of approved pattern in Cement Concrete floors, steps, landing, pavements etc. complete. |
| 104 | Providing and laying cement plaster skirting upto 300 mm height with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) finished with a floating coat of neat cement including rounding of junctions etc. complete. |
| 105 | (i) 18 mm thick |
| 106 | (ii) 21 mm thick |
| 107 | Providing and fixing precast chequered cement concrete tiles 22 mm thick, laid in footpath & courtyard, on 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete. |
| 108 | (i) In dark shade using ordinary cement |
| 109 | Providing and fixing Kota stone in floors over 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishingcomplete. |
| 110 | (i) Kota stone slab 25mm thick |
| 111 | Providing and laying polished vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % and conforming to IS : 15622of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 112 | (i) Size of tile 60x60 cm |
| 113 | SUB-HEAD : ROOFING AND CEILING WORK |
| 114 | ProvidingandfixingonwallfaceunplasticisedRigidPVCrainwater pipes (working pressure 4 kg / cm2)conformingto IS : 13592 Type Aincludingjointingwith sealring conformingtoIS:5382leaving10mmgapforthermalexpansion: |
| 115 | (i) Single socketed pipe - 110 mm OD |
| 116 | Providingandfixing on wallface unplasticised - PVCmouldedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS:13592TypeAincludingjointingwith sealringconformingtoIS: 5382 leaving 10 mm gap forthermalexpansion: |
| 117 | (i) Coupler - 110mm |
| 118 | (ii) Single equal tee without door - 110 x 110 x 110 mm |
| 119 | (iii) Single equal tee with door - 110 x 110 x 110 mm |
| 120 | (iv) Bend 87.5 degree - 110mm |
| 121 | (v) Plain shoe - 110 mm |
| 122 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVCrainwater pipesbymeansof50x50x50mmhard woodplugs,screwedwithM.S.screwsofrequiredlengthincluding cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete. |
| 123 | (i) 110mm |
| 124 | Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete. |
| 125 | (i) 100mm |
| 126 | Providingandfixingatallheightfalseceilingincludingprovidingand fixing of frame work made of special sections power pressed from M.S. sheet andgalvanisedinaccordancewith zinccoating ofgrade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at1200mm centre to centre one flangefixedtotheceilingwithdashfastener12.5mmdiax40mmlong with 6mm dia bolts tothe angle hangersof 25x25x0.55mmof required length, and other end of angle hanger being fixed with nut and bolts to G.I.channels45x15x0.9mmrunningattherateof1200mmcentreto centre to whichthe ceiling section 0.5mm thickbutton wedge of 80mm with tapered flanges of26mm each havingclipsof 10.5mmat450mm centretocentreshallbefixedinadirectionperpendiculartoG.I. channelwithconnectingclipsmadeoutof2.64mmdiax230mmlong G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mmlong, |
| 127 | theperimeterof ceilingfixed to wall/partitionwith thehelpofrawlplugs at450mm centre to centrewith 25mm long drive-allscrews@230mmintervalincludingjointingandfixingtoa flushfinishoftaperedandsquareedgesoftheboardwith recommendedfiller,jointingtapes,finisherandtwocoatsofprimer suitable for board as per manufacturesspecificationandalso including thecostofmakingopeningsforlightfittings,grills,diffusers,cutouts madewithframeofperimeterchannelssuitablyfixedallcompleteas perdrawingandspecificationanddirectionoftheEngineer inCharge but excluding the cost of painting with : (i) 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I |
| 128 | SUB-HEAD : FINISHING WORK |
| 129 | 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. |
| 130 | (i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 131 | (ii) In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 132 | 15 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. |
| 133 | (i) In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) |
| 134 | Neat cement punning. |
| 135 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including a priming coat of cement primer to give an even shade complete. |
| 136 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 kg/10 sqm ) over and including base coat water proofing cement paint applied @ 2.20 kg/10 sqm complete. |
| 137 | Applying priming coat: |
| 138 | (i) With ready mixed pink primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 139 | (ii) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work. |
| 140 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. |
| 141 | SUB-HEAD:WATER PROOFING WORK |
| 142 | Providing and laying grading of roof for water proofing treatment complete as required as per direction of the Engineer-in-charge:- |
| 143 | (i) Cement concrete 1:2:4 ( 1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size ). |
| 144 | (ii) Cement mortar 1:3 (1 cement : 3 fine sand) |
| 145 | Providing and applying heavy duty Polymer modified acrylic base, two component polymer membrane water proofing coating 2 (two) coats over sunken floor, bathroom etc. by mixing polymer liquid and powder at 1:4 ratio using 3.00 kg / sqm at floor and wall including cleaning the surface and saturated the same with clean water and chamfering the junction between sunken floor and wall by 15 mm thick cement plaster, 1:3 mixed with SBR base latex powder using 0.200 kg/sqm upto a height of 150 mm on wall and 150 mm on floor surface before application of polymer membrane and finally 12 mm cement plaster 1:4 ratio mixed with water proofing admixture 100 gm / 50 kg bag of cement complete as per direction of Engineer-in-charge and technical specifications. After completion a Pond test should be conducted by Ponding about 150 mm water for three days, both in the sunken portion and in the normal level floor area. |
| 146 | SUB-HEAD : SANITARY WORKS |
| 147 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcisternwithmanuallycontrolleddevice(handlelever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 148 | (i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 149 | Providingandfixingwhitevitreouschinapedestaltypewatercloset (Europeantype W.C.pan)withseatandlid,10litrelowlevelwhite P.V.C.flushing cistern withmanually controlled device (handlelever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 150 | (i) W.C. pan with ISI marked white solid plastic seat and lid |
| 151 | Fixingwhitevitreouschina flatbackorwallcornertype lipped front urinalbasinof430x260x350mmand340x410x265mmsizes respectively withautomaticflushingcisternwith standard flushpipe andC.P.brassspreaderswithbrassunionsandG.Iclamps complete,includingpaintingoffittingsandbrackets,cuttingand making good the walls and floors wherever required : |
| 152 | (i) Range of four urinal basins with 10 litre white PVC automatic flushing cistern |
| 153 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 154 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: |
| 155 | (i) Flat back wash basin of size 550x400mm. |
| 156 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 157 | (i) Semi rigid pipe - 32 mm dia |
| 158 | (ii) Flexible pipe - 32 mm dia |
| 159 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 160 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 161 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms |
| 162 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms |
| 163 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 164 | Providing and fixing soil, waste and vent pipes: (i) 100 mm dia. - Sand cast iron S&S pipe as per IS: 1729. |
| 165 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : |
| 166 | (i) For 100 mm dia. Pipe |
| 167 | Providing and fixing heel rest sanitary bend (i) 100 mm dia - Sand cast iron S&S as per IS - 1729 |
| 168 | Providing and fixing single equal plain junction of required degree (i) 100x100x100 mm - Sand cast iron S&S as per IS - 1729 |
| 169 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. (i) 100x100x100 mm - Sand cast iron S&S as per IS - 1729 |
| 170 | Providing and fixing double equal plain junction of required degree. (i) 100x100x100x100 mm - Sand cast iron S&S as per IS - 1729 |
| 171 | Providing and fixing collar: (i) 100 mm - Sand cast iron S&S as per IS - 1729 |
| 172 | Providing and fixing sand cast iron S&S offsets as per IS: 1729 (i) 152 mm offsets - With 100 mm dia. Pipe |
| 173 | Providing and fixing terminal guard: (i) 100 mm - Sand cast iron S&S as per IS - 1729 |
| 174 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 175 | (i) 100mm |
| 176 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: (i) 100 mm inlet and 100 mm outlet - Sand Cast Iron S&S as per IS: 1729. |
| 177 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand): |
| 178 | (i) 100 mm dia. |
| 179 | SUB-HEAD : WATER SUPPLY |
| 180 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Inernal work - Exposed on wall. |
| 181 | (i) 15 mm dia. nominal bore |
| 182 | (ii) 20 mm dia. nominal bore |
| 183 | (iii) 25 mm dia. nominal bore |
| 184 | (iii) 40 mm dia. nominal bore |
| 185 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 186 | (i) 25 to 40 mm nominal bore |
| 187 | Providing and fixing brass bib cock of approved quality : |
| 188 | (i) 15 mm nominal bore |
| 189 | Providing and fixing brass stop cock of approved quality : |
| 190 | (i) 15 mm dia nominal bore |
| 191 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 192 | (i) 25 mm nominal bore |
| 193 | (ii) 40 mm nominal bore |
| 194 | Providing and fixing gun metal non-return valve of approved quality (screwed end): (i) 40 mm nominal bore - Vertical |
| 195 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 196 | Constructing masonryChamber 30x30x50 cm, insidewith 75 class designation brick work incement mortar1:5 (1 cement :5 fine sand) forstopcock, withC.I.surface box100x100x75mm (inside)with hingedcover fixedincement concreteslab1:2:4mix (1 cement:2 coarsesand:4gradedstoneaggregate20mmnominalsize) necessary excavation foundationconcrete 1:5:10 ( 1cement :5fine sand:10gradedstoneaggregate40mmnominalsize)andinside plastering with cement mortar 1:3 (1 cement :3 coarsesand) 12mm thick finishedwithafloatingcoatofneatcementcompleteasper standard design : |
| 197 | (i) With Second Class bricks |
| 198 | Painting G.I. pipes and fittings with synthetic enamel white paint overa ready mixed priming coat, both of approved quality for new work : |
| 199 | (i) 15 mm diameter pipe. |
| 200 | (ii) 20 mm diameter pipe. |
| 201 | (iii) 25 mm diameter pipe. |
| 202 | (iv) 40 mm diameter pipe. |
| 203 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 204 | (i) 40 mm diameter pipe |
| 205 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 206 | (i) 25mm nominal bore. |
| 207 | (ii) 40 mm nominal bore. |
| 208 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: |
| 209 | (i) 150 mm diameter |
| 210 | SUB-HEAD : SEWAGE AND DRAINAGE WORKS |
| 211 | Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete : |
| 212 | (i) 150 mm diameter |
| 213 | Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design: |
| 214 | (i) 150 mm diameter S.W, pipe |
| 215 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 216 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : |
| 217 | (i) Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : |
| 218 | Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design : |
| 219 | (i) For 500x700 mm size |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
