Rural Development Department has published Construction Of Arts And Craft Room Including Toilet At Tuichindrai Bari High School Under Teliamura Rd Block Construction Of Arts And Craft Room Including Toilet At Tuichindrai Bari High School Under Teliamura Rd Block. Submission Date for this Tender is 22-03-2022. Toilet Bathroom Tenders in Khowai Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etcwith sand (fine) from local quarry with all lifts including spreading in horizontal layers,watering,grading torequired slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 5 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- R.C.C work in suspended floors, roofs having slope upto 15" landings, balconies, shelves and chajjas.1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Centering shuttering including struttings, propping etc.and removal of form work for:Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 10 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply. |
| 12 | Suspended floors, roofs, landings, balconies and access platform with shuttering ply. |
| 13 | Edges of slabs and breaks in floors and walls under 20cm. Wide |
| 14 | Weather shade, chajjas, corbels etc. including edges. |
| 15 | Reinforcement for R.C.C work including staitening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 16 | Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffitsa) 40 mm thick |
| 17 | First class brick work in foundation and plinth including cost of all materials as required complete:In cement mortar 1:6 ( 1 cement : 6 fine sand ) |
| 18 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thickb AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). |
| 19 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 20 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 21 | Providing and fixing 25 mm thick shutters for cupboards etc. including ISl marked black enamelled M.S. butt hinges with necessary screws : Panelled or panelled and glazed shutters |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.i) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 23 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. |
| 24 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-incharge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 25 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement :3fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 26 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :a) 300x16 mm |
| 27 | b) 250x16mm |
| 28 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :a)300x10 mm |
| 29 | b)150x10mm |
| 30 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :a)125mm |
| 31 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. a) Single rubber stopper |
| 32 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. A)Fixed to openings /wooden frames with rawl plugs screws etc. |
| 33 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :- A) For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):-i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
| 34 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- A) With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 35 | Providing and fixing stainless steel ( SS 304 grade ) adjustable friction window stay of approved quality with necessary stainless steel screws etc. to the side hung windows etc. complete as per direction of Engineer-incharge:-a) 205 x 19 mm |
| 36 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required |
| 37 | Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 38 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete A)40mm thick |
| 39 | Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete.A) 25 mm thick with 12.5 mm well burnt brick aggregate |
| 40 | Providing and laying cement plaster skirting upto 300 mm height with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) finished with a floating coat of neat cement including rounding of junctions etc. complete.A) 18 mm thick |
| 41 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-inCharge. |
| 42 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 43 | Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete.Anti-Skid Tiles Ceramic Tiles 1st quality 300 x 300mm in all shades and designs |
| 44 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. a) Double charged Stainfree vitrified tiles i) Size of tile 60x60 cm |
| 45 | 6 mm cement plaster of mix : Cement mortar 1:3 (1 cement : 3 fine sand) |
| 46 | 12 mm cement plaster of mix In Cement mortar 1:6(1 cement : 6 fine sand) |
| 47 | 12 mm cement plaster of mix In Cement mortar 1:4(1 cement :4 fine sand) |
| 48 | Neat cement punning |
| 49 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of TestCertificate issued by the Manufacturer] : New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 50 | Finishing walls with premium acrylic smooth exterior paint with Silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 51 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ) |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work over an undercoat of suitable shade with ordinary paint (primer) of approved brandand manufacture. |
| 53 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. Internal work - Exposed on wall.a)15 mm dia. nominal bore metre |
| 54 | b) 20 mm dia. nominal bore metre |
| 55 | c) 25 mm dia. nominal bore metre |
| 56 | d) 32 mm dia. nominal bore |
| 57 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work) a) 20 mm nominal bore |
| 58 | b) 25 mm nominal bore |
| 59 | c) 32 mm nominal bore |
| 60 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD specification and direction of the Engineer - in - charge. External work a) 40 mm dia. nominal bore |
| 61 | b) 50 mm nominal bore |
| 62 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):a) 32 mm dia. nominal bore |
| 63 | Providing and fixing gun metal non-return valve of approved quality (screwed end): a) 32 mm dia. nominal bore Vertical |
| 64 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete :a) 25 mm dia. nominal bore |
| 65 | Providing and fixing uplasticised PVC connection pipe with brass unions :a) 45 cm lengthi)15 mm nominal bore |
| 66 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. i) 15mm nominal bore. |
| 67 | Providing and fixing PTMT grating of approved quality and colour.Circular type. i) 100 mm nominal dia. |
| 68 | Cutting holes upto 30x30 cm in walls including making good the same : i) With 1st class bricks. |
| 69 | Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. |
| 70 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 71 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 72 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : a) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 73 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : a) W.C. pan with ISI marked white solid plastic seat and lid |
| 74 | Providing and Fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. |
| 75 | Providing and Fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. Automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : a) Single squatting plate with 5 litre P.V.C. automatic flushing cistern. |
| 76 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 77 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board i) 610x510 mm bowl depth 200 mm. |
| 78 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 79 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 80 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. A) Flexible pipe i)1 32 mm dia |
| 81 | Providing and fixing to the inlet mouth of rain water, soil, waste & vent pipes pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. a) 100mm |
| 82 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : i) Inside dimensions 455x610 mm and 45 cm deep for single pipe line : |
| 83 | ii) Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : |
| 84 | Extra for depth beyond 450 mm of brick masonry chamber for underground C.I. inspection chamber with same specification as mentioned in item no 20.330 complete as per standard design : i) For 455x610 mm size |
| 85 | ii)For 500x700 mm size |
| 86 | Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : i) 100 mm diameter S.W. pipe |
| 87 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 88 | Suppllying and fitting fixing of Green Chalk Board of size 1200x2400 mm as per specification. |
| 89 | aaaaa |
| 90 | aaaaa |
| 91 | aaaaa |
| 92 | aaaaa |
| 93 | aaaaa |
| 94 | aaaaa |
| 95 | aaaaa |
| 96 | aaaaa |
| 97 | aaaaa |
| 98 | aaaaa |
| 99 | aaaaa |
| 100 | aaaaa |
| 101 | aaaaa |
| 102 | aaaaa |
| 103 | aaaaa |
| 104 | aaaaa |
| 105 | aaaaa |
| 106 | aaaaa |
| 107 | aaaaa |
| 108 | aaaaa |
| 109 | aaaaa |
| 110 | aaaaa |
| 111 | aaaaa |
| 112 | aaaaa |
| 113 | aaaaa |
| 114 | aaaaa |
| 115 | sasasasasasasasasasasasasasasasasasa |
| 116 | sasasasasasasasasasasasasasasasasasa |
| 117 | sasasasasasasasasasasasasasasasasasa |
| 118 | sasasasasasasasasasasasasasasasasasa |
| 119 | sasasasasasasasasasasasasasasasasasa |
| 120 | sasasasasasasasasasasasasasasasasasa |
| 121 | sasasasasasasasasasasasasasasasasasa |
| 122 | sasasasasasasasasasasasasasasasasasa |
| 123 | sasasasasasasasasasasasasasasasasasa |
| 124 | sasasasasasasasasasasasasasasasasasa |
| 125 | sasasasasasasasasasasasasasasasasasa |
| 126 | sasasasasasasasasasasasasasasasasasa |
| 127 | sasasasasasasasasasasasasasasasasasa |
| 128 | sasasasasasasasasasasasasasasasasasa |
| 129 | sasasasasasasasasasasasasasasasasasa |
| 130 | sasasasasasasasasasasasasasasasasasa |
| 131 | sasasasasasasasasasasasasasasasasasa |
| 132 | sasasasasasasasasasasasasasasasasasa |
| 133 | sasasasasasasasasasasasasasasasasasa |
| 134 | sasasasasasasasasasasasasasasasasasa |
| 135 | sasasasasasasasasasasasasasasasasasa |
| 136 | sasasasasasasasasasasasasasasasasasa |
| 137 | sasasasasasasasasasasasasasasasasasa |
| 138 | sasasasasasasasasasasasasasasasasasa |
| 139 | sasasasasasasasasasasasasasasasasasa |
| 140 | sasasasasasasasasasasasasasasasasasa |
| 141 | sasasasasasasasasasasasasasasasasasa |
| 142 | sasasasasasasasasasasasasasasasasasa |
| 143 | sasasasasasasasasasasasasasasasasasa |
| 144 | sasasasasasasasasasasasasasasasasasa |
| 145 | sasasasasasasasasasasasasasasasasasa |
| 146 | sasasasasasasasasasasasasasasasasasa |
| 147 | sasasasasasasasasasasasasasasasasasa |
| 148 | sasasasasasasasasasasasasasasasasasa |
| 149 | sasasasasasasasasasasasasasasasasasa |
| 150 | sasasasasasasasasasasasasasasasasasa |
| 151 | sasasasasasasasasasasasasasasasasasa |
| 152 | sasasasasasasasasasasasasasasasasasa |
| 153 | sasasasasasasasasasasasasasasasasasa |
| 154 | sasasasasasasasasasasasasasasasasasa |
| 155 | sasasasasasasasasasasasasasasasasasa |
| 156 | sasasasasasasasasasasasasasasasasasa |
| 157 | sasasasasasasasasasasasasasasasasasa |
| 158 | sasasasasasasasasasasasasasasasasasa |
| 159 | sasasasasasasasasasasasasasasasasasa |
| 160 | sasasasasasasasasasasasasasasasasasa |
| 161 | sasasasasasasasasasasasasasasasasasa |
| 162 | sasasasasasasasasasasasasasasasasasa |
| 163 | sasasasasasasasasasasasasasasasasasa |
| 164 | sasasasasasasasasasasasasasasasasasa |
| 165 | sasasasasasasasasasasasasasasasasasa |
| 166 | sasasasasasasasasasasasasasasasasasa |
| 167 | sasasasasasasasasasasasasasasasasasa |
| 168 | sasasasasasasasasasasasasasasasasasa |
| 169 | sasasasasasasasasasasasasasasasasasa |
| 170 | sasasasasasasasasasasasasasasasasasa |
| 171 | aaaaa |
| 172 | sasasasasasasasasasasasasasasasasasa |
| 173 | sasasasasasasasasasasasasasasasasasa |
| 174 | aaaaa |
| 175 | aaaaa |
| 176 | aaaaa |
| 177 | aaaaa |
| 178 | aaaaa |
| 179 | aaaaa |
| 180 | aaaaa |
| 181 | aaaaa |
| 182 | aaaaa |
| 183 | aaaaa |
| 184 | aaaaa |
| 185 | aaaaa |
| 186 | aaaaa |
| 187 | aaaaa |
| 188 | aaaaa |
| 189 | aaaaa |
| 190 | aaaaa |
| 191 | aaaaa |
| 192 | aaaaa |
| 193 | aaaaa |
| 194 | aaaaa |
| 195 | aaaaa |
| 196 | aaaaa |
| 197 | aaaaa |
| 198 | aaaaa |
| 199 | aaaaa |
| 200 | aaaaa |
| 201 | aaaaa |
| 202 | aaaaa |
| 203 | aaaaa |
| 204 | aaaaa |
| 205 | aaaaa |
| 206 | aaaaa |
| 207 | aaaaa |
| 208 | aaaaa |
| 209 | aaaaa |
| 210 | aaaaa |
| 211 | aaaaa |
| 212 | aaaaa |
| 213 | aaaaa |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
