Construction Of Road And Drain From Dharmadhikar To Mandir In P.N.15
Tender Value
16.43 Lakhs
Estimated cost
Bid Submission
24 Mar 2022
0 days left
EMD
16440
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
parbhani → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road And Drain From Dharmadhikar To Mandir In P.N.15
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. MORTH 301 SSR OF 2021-22 ITEM NO. 2.11 & PAGE NO.23 |
| 2 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.MORTH 305 SSR OF 2021-22 ITEM NO. 2.25 & PAGE NO.24 |
| 3 | Providing earthworkinembankmentwithapprovedmaterialsobtainedfrom othersources upto leadof 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratoryrollerwithV-Satattachmenttoachievenotlessthan97%ofstandardproctordensity etc. complete( Material obtained from Other sources) MORTH 305 SSR OF 2021-22 ITEM NO. 2.28 & PAGE NO.24 |
| 4 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material SSR OF 2021-22 ITEM NO. 3.01 & PAGE NO.26 |
| 5 | Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. SSR OF 2021-22 ITEM NO. 3.23 & PAGE NO.28 |
| 6 | Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning ofroad surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means. SSR OF 2021-22 ITEM NO. 3.29 & PAGE NO.28 |
| 7 | DENSE BITUMINOUS MACADAM:--Providing and laying dense bituminous macadam using crushed aggregate of grading 1, premixed with bituminous binder Bitumen of specified grade,@ 4.50 % by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 76/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27-2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver, and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen VG-30 grade with stone dust filler (VG-30 bulk bitumen rates are considered to arrive at rates) SSR OF 2021-22 ITEM NO. 3.46 & PAGE NO.31 |
| 8 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) SSR OF 2021-22 ITEM NO. 3.31 & PAGE NO.28 |
| 9 | BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1,premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) SSR OF 2021-22 ITEM NO. 3.5 & PAGE NO.31 |
| 10 | Dressing of side shoulder / Scrapping the road side shoulder by Mechanical means( By JCB /DOUZER) including excavation of raised side shoulders upto 15cm depth including remooving /cutting bushes,grass and dressing shoulder to desired camber and disposing of excavated stuff up to road boundary etc complete. as directed by Engineer In Charge. SSR OF 2021-22 ITEM NO. 8.23 & PAGE NO.59 |
| 11 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete.SSR OF 2021-22 ITEM NO. 2.29 (a) & PAGE NO.24 |
| 12 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete SSR OF 2021-22 ITEM NO. 2.3 & PAGE NO.24 |
| 13 | Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.SSR OF 2021-22 ITEM NO. 2.31 & PAGE NO.24 |
| 14 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc., having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.SSR OF 2021-22 ITEM NO. 6.36 & PAGE NO.47 |
| 15 | ROYALTY CHARGES :- Supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates.[As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt.04 June,2021. States that the royalty charges ofRs.211.95/Cu.M. ) are considered. The surcharge levied on Royalty shall also be payable to the contractor.E DSR ITEM NO. ... & PAGE NO....ROYALTY CHARGES FOR SAND |
| 16 | ROYALTY CHARGES FOR OTHER MINERALS |
| 17 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender.testing of material by Quality control and certified quality must be use by contractor.BASIC TEST OF AGGREGATE Water Absorption, Specific Gravity, Impact Value, Crushing Value |
| 18 | BITUMINOUS Penetration, Softening Point, Flash & Fire Point, Specific Gravity. |
| 19 | EARTH CBR Test (Lab) With compaction test |
AI Tender Summary
Tender Timeline
Mar 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 24, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 28, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender