|
| 1 | (A) |
| 2 | IS SEIEVE SETS ( 20CM DIA BRASS FRAME). AS PER SPECIFICATIONSOF IS:460) Sizes (mm/mircron- µ).a) 10.00 Cum b) 4.75 mm.c) 2.36 mm.d) 2.00 Cum. e) 1.18 Cum. f) 1.00 mm. g) 600 µ .h)425 µ. i) 300 µ .j) 150 µ.k) 90 µ .I) 75 µ Pan & Cover. |
| 3 | Is SIEVE SETS (AS PER SPECIFICATIONS OF IS:460) ISS GI-FRAME SIEVE SET.(SIZE 30CM DIA). a)125mm . b)106mm . c) 90mm.d)80mm. e)63mm.f) 53mm. g)45mm.h) 40mm. i) 37.5mm.j) 31.0mm. k)26.5mm. l) 22.40mm.m)20mm. n)19mm.0)16mm. p)13.2mm.q)12.5mm.r) 11.2mm. s) 10.0mm. t)9.5mm. u) 6.3mm.v) 5.6mm.w) 2.8mm.x) 4.75mm. y) 3.35mm. z) 2.36mm.(COMPLETE AND OPERATIONAL IN ALL RESPESCTS). |
| 4 | LABORATORY CONCRETE SPECIMEN CUBE MOULDSAS PER RELEVANT IS-SPECIFICATIONS(IS:10086)Cube Moulds for preparing concrete specimens for checking compressive strength of cement concrete,for size of 150mm. |
| 5 | ELECTRIC HOT AIR OVEN (Reputed Make) Superior laboratory electric Oven, thermostatically controlled or with digital controller cum indicator with safety alarm. It must be Double walled with outer body made of MS Powder Coated & inner made of Stainless Steel. It must have provision for horizontal ribs for adjusting trays at any height. Equipment must have side heating/air circulating fan, to distribute the temperature range of 50°C to 250°C ± 1°C, with air-ventilators.The size of oven must be 450x450x450 cm, with size tolerance ±10mm. Equipment must operate under 220 V (±5%), 50Hz, Single Phase AC Supply Equipment must be of Good make / manufacture and finish.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 6 | PRECISION ELECTRONIC/DIGITAL BALANCEWith dual power operation (AC/Battery): 400 gm-600gm capacity, With read out of at least 0.01gm, reproducilbilty of 0.01gm.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 7 | PRECISION ELECTRONIC/DIGITAL BALANCEWith dual power operation (AC/Battery): Superior Brand Precision Digital (5 Kg), capable of measuring at least 1.0 gm to 5 Kg with permissible error (COMPLETE AND OPERATIONAL IN ASLL RESPECTS) |
| 8 | PRECISION ELECTRONIC/DIGITAL BALANCE With dual power operation (AC/Battery): Superior Brand Precision Digital (30 Kg), capable of measuring at least 5.0 gm to 30 Kg with permissible error (COMPLETE AND OPERATIONAL IN ASLL RESPECTS) |
| 9 | PRECISION INFRARED THERMOMETER Digital non-contact infrared Thermometer (Fluke or Superior make ) with back light LCD Display, battery powered, with minimum operational temperature range of -20°C to 300°C (or better), display resolution of at least 0.1 °C/°F, suitable spectral response ,Class-2 laser power with display hold feature.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 10 | PRECISION PROBE TYPE THERMOMETER Digital contact type ProbeThermometer (Superior make ),battery powered, with minimum operational temperature range of -50°C to 300°C (or better), display resolution of at least 0.1 °C/°F(COMPLETE & OPERATIONAL IN ALL RESPECTS). |
| 11 | AGGREGATE IMPACT TESTING MACHINE (As per Specifications of IS:9377)Standard Aggregate Impact Testing Machine for determination of Impact Value for small size mineral aggregates/rocks.Equipment must be of Good make/manufacture and finish, (COMPLETE AND OPERATIONAL IN ALL RESPECTS) Equipment must be of good make and manufacture and finish. |
| 12 | Enamel EI-Trays Sampling purpose enamel tray/plates/buckets of following minium sizes |
| 13 | a)250x300 mm Tray(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 14 | b)450x600 mm Tray (COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 15 | FLAKINESS APPARATUS (SHAPE TEST)As per IS Specifications/SP-36, IS:2386 (Part-1)Equipment must consist of following:Thickness guage manufactured from heavy guage steel with IS-Certificate StampEquipment must be of Good make/manufacture and finish.(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 16 | SLUMP TEST APPARATUS(AS per IS Specifications IS 7320)Apparatus must be complete for determination of slum of fresh concrete for measuring its consistency for aggregate size less then 38mm, Apparatus must include standard size Slump Cone, Base Plate & Tamping Rod.(Equipment/Supply must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT) |
| 17 | BITUMEN BINDER CENTRIFUGE EXTRACTOR(As per Relevant IS Specifications/ ASTM D 2172)Manually operated Bitumen Binder Centrifuge extractor for bituminous mix up to 1.5 kg capacity, with hand speed control with filter Paper Discs (Set of 500 sheets) Equipment must be of Good make/manufacture and finish. (Complete and Operational in all respects) |
| 18 | SOFTENING POINT APPARATUS (RING & BALL METHOD)The test apparatus must be as perIS:1205/ ASTMD36 relevant specifications, for determination of softening temperature of bitumen, using ring and ball method. Equipment must have built in heating facility, magnetic stirrer and temperature controller. Apparatus must be operational for 220 V, 50Hz, Single Phase AC Supply.Equipment must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT. |
| 19 | DUCTILITY APPARATUS (ELECTRICALLY OPERATED WITH COOLING ARRANGEMENT) The test apparatus must be as per IS:1208/ASTMD113 relevant specifications, for determination of ductility of bitumen using control elongation (constant speed) by way of ductility machine. Equipment must have built in water bath with heating facility using electric pump circulator and heater. Equipment must be supplied with ductility moulds and base plates for testing three samples simultaneously. Apparatus must be operational for 220V , 50Hz, Single Phase AC Supply.Equipment must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT. |
| 20 | CONSISTENCY TEST APPARATUS The test apparatus must be as per IS:2720 Part-5 (Liquid Limit) of soils by Casagrande Method. The apparatus must be manually operational, with counter , IS/BS/ASTM Grooving Tools, Guaging Block. Equipment must be of Good make/manufacture and finish. (COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 21 | SAND REPLACEMENT FIELD DENSITY APPARATUS (SMALL) Field Density Equipment using Sand Replacement Method (Small) must be supplied as per IS:2720 (Part-28), with following parts: 1) Sand pouring cylinder fitted with Conical Funnel and Shutter, Capacity 3 litre. (1-No) 2) Cylindrical Calibration Container 100mm ID x 150mm height (1-No). 3) Metal Tray size 30x30x4 cm with 10cm central hole (1-No) Equipment must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT |
| 22 | PAVEMENT DEPTH/THICKNESS GUAGEMS ThicknessGuage with minimum guaging depth of 150mm(COMPLETE & OPERATIONAL IN ALL RESPECTS) |
| 23 | Analogcum computrisedElectrically Operated UTM(TUE-C-1000)Universal Testing Machine Confirm relevent IS codewith ± 1% accuracy.Loading range:0- 2000withMaximum clearance between platens:0-900mmMaximumtensileclearance at fully distended position : 50-900 mmMaximun clearence for compression test mm:0-900Piston stroke 300 mm Motor HP 6.5Power Requirement: 3 phase ,415V, 50 Hz, AC supply Unique features are:• Calibration within 1% of full scale deflection with traceabilityto NABL• Powder coating finished surfaceStandard acessories for Tension test and transverse test• Continuous Voltage Transformer (CVT)Note: With NABL CalibrationEquipment must be of superior make/manufacture and finish,COMPLETE IN ALL RESPECT . |
| 24 | Automatic Controlled Single Phase Stabilizer (KVA)As per IS Specifications IS: 9815Equipment must be an indoor floor mounted single phase automatic (copper wound) I/P range 90V to 300V, single pphase, O/P of 230 ± 4 % , frequency 50-60Hz. Air-cooled construction with U/V , O/V , O/L protection system. Equipment must have working temperature range of -5°C to 50°C , 95% RH with super insulationresistance, including necessary supply of quality Oil.(Equipment/Supply must be of superior make/manufacture and finish, COMPLETE IN ALL RESPECT) |
| 25 | Miscellaneous Items/Glassware/Consumble Items/safety equipment |
| 26 | a) Superior Quality Borosilicate bottles of 50ml Capacity, with capillary bored glass stopper, for determination ofSpecific Gravity of Soil/Bitumen/Powders etc. |
| 27 | b) Heat Resistance safety glove of superior quality. |
| 28 | c) Natural high grade pigmented heavy duty latex hand gloves of medium size. |
| 29 | d) Laboratory Appron of superior make. |
| 30 | e) Medium size SS Scoops/Trowels. |
| 31 | f) Superior quality and make Heavy-Duty LED flash light with chargeable battery. |
| 32 | g) Superior Quality Masks. |
| 33 | h) Knife/Spatula. |
| 34 | i) Trichloroethylene. |
| 35 | j) Glass Beaker 1 liter Capacity. |
| 36 | k) General Tool Box |
| 37 | l) SS Container (1-liters) with lids. |
| 38 | m) Disposable Aluminium Foil Container. |
| 39 | n) Traffic Diversion Cones (Delineators). |
| 40 | o) SS moisture containers with lids. |
| 41 | p) Automatic core cutter battery drawn for BT sampling at site Equipment must be of Amil made or equivalent |
| 42 | t) Laboratory thermostate tank for curing of concrete cube (50 ltr) capacity.Equipment must be of Amil made or equivalent |
