Beautification Work Hafiz Sahab Gate At Merta City Beautification Work Hafiz Sahab Gate At Merta City
Tender Value
6.50 Lakhs
Estimated cost
Bid Submission
21 Mar 2022
0 days left
EMD
13000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
merta → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Beautification Work Hafiz Sahab Gate At Merta City Beautification Work Hafiz Sahab Gate At Merta City
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE-G (ITEM) |
| 2 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 25 mm |
| 3 | Double pole MCB 6 A to 32 A rating |
| 4 | Providing and laying XLPE/PVC insulated & PVC sheathed armoured control cables of 1.1 KV grade with copper conductor as per IS 1255 including excavation of 30 CmX75 Cm size trench 25 Cm thick under layer of sand and second class bricks covering, backfilling & compaction4C x 2.5 sq.mm |
| 5 | Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating With pipe in pipe technology with 80-100 micron G.I. coating G.I. pipe 3000 mm long , 80/40 mm , terminal 14 mm G.I. strip |
| 6 | S & Laying following size earth wire/strip in horizontal or vertical run in round/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG G.I. Wire |
| 7 | GI pipe 32 mm dia \"B\" class |
| 8 | Supplying and making one end termination with heavy duty double compression brass gland SIBG type, heavy duty copper lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 4 x 2.5 sq.mm |
| 9 | Supplying and drawing PVC insulated & sheathed solid/ stranded copper conductor multi core control cable ISI marked (IS:1554) of 1.1 kV grade of approved make in existing surface or recessed conduit/ casing capping including making connections etc. as required.1.5 sq. mm. unarmoured 2 core |
| 10 | Supplying and making end termination with heavy copper lugs (pin/ ring type) duty crimped with crimping tool, PVC tape etc of followingsize 1.5 Sq.mm |
| 11 | Supply and fixing of piller box made of 2mm CRCA MS sheet of 415 volts 3 phase 4 wire triple pole and neutral type, complete in all respect as required. Including knife switch, HRC fuses with copper one piece U contacts base, brass studs and nuts, copper busbar for main and interconnection, MS angle frame of 50 x 50 x 6 mm grouted with C.C. of M-10 grade to achieve the height of 1.5 feet bove the road level suitable for four outgoing feeders of 400Ampcapacity. |
| 12 | SCHEDULE-H (ITEM) |
| 13 | Supply & Installation of RGB Linear Projector Light of wattage range 48-60 W. The Housing in light weight, Made of high strength Aluminum extrusion and powder coated in weather resistant. The reference size should be minimum 500-600mm. The housing must be IP66 protected. Light fixture should be standard DMX512 protocolcompatible. Each Light should be individually addressable . LED Chip of reputed make should be used. Make Philips / Wipro / Daisun or approved equivalent The sample is first to be approved by the Engineer Incharge. |
| 14 | Supply & Installation of RGB Projector Light of wattage range 12-18 W. The Housing in light weight, Made of high strength die cast Aluminum and powder coated in weather resistant. The housing must be IP66 protected. Light fixture should be standard DMX512 protocolcompatible. Each Light should be individually addressable . LED Chip of reputed make should be used. Make Philips / Wipro / Daisun or approved equivalent The sample is first to be approved by the Engineer Incharge. |
| 15 | Supply & Installation of RGB Projector Light of wattage range 100-120 W. The Housing in light weight, Made of high strength die cast Aluminum and powder coated in weather resistant. The housing must be IP66 protected. Light fixture should be standard DMX512 protocolcompatible. Each Light should be individually addressable . LED Chip of reputed make should be used. Make Philips / Wipro / Daisun or approved equivalent The sample is first to be approved by the Engineer Incharge. |
| 16 | Supply & Installation of RGB Strip of wattage range 12-18W/Meter. The Housing in light weight, Made of high strength Aluminum extrusion and powder coated in weather resistant. . The housing must be IP66 protected. Light fixture should be standard DMX512 protocolcompatible. Each Light should be individually addressable . LED Chip of reputed make should be used. Make Philips / Wipro / Daisun or approved equivalent The sample is first to be approved by the Engineer Incharge. |
| 17 | Supply & Installation of RGB Projector Light of wattage range 3-9 W. The Housing in light weight, Made of high strength die cast Aluminum and powder coated in weather resistant. The housing must be IP66 protected. Light fixture should be standard DMX512 protocolcompatible. Each Light should be individually addressable . LED Chip of reputed make should be used. Make Philips / Wipro / Daisun or approved equivalent The sample is first to be approved by the Engineer Incharge. |
| 18 | Supply & Fixing of Noise free IP65 DMX interconnecting cable. |
| 19 | SITC of IP68 Low THD and flicker free DC Voltage Stablizer with inbuilt 5KV Surge protection.Output Voltage 24/48V - 10Amp in CVCC Mode. Make Philips / Wipro / Daisun or approved equivalentThe sample is first to be approved by the Engineer Incharge. |
| 20 | SITC of upto 100W Power booster for enhancing the voltage drop in the supply. |
| 21 | Supply & Fixing of rain proof 512 DMX Controller with 8 Channel/Scene for controlling of Dynamic Lighting and creating various scenes for different application.Make Philips / Wipro / Daisun or approved equivalent The sample is first to be approved by the Engineer Incharge. |
| 22 | Supply and laying of DMX Cable (Single Pair) having one 24 AWG pair stranded tinned copper conductor, PO Insulation, twisted pairs overall beldfoil + tinned copper braid shield, PVC outer Jacket |
| 23 | Exclosure for DMX controller, Plain sides, Industrial plastic enclosure for outdoor application. Polyurethane gasket. |
AI Tender Summary
Tender Timeline
Mar 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender