Provision Of 3 Nos. Of Shml Pole At Patel Park Laxmi Nagar And Safeda Park ( Gyan Kunj ) Laxmi Nagar And Park At Pnb Colony Bank Enclave In Ward No. 14-E ( Laxmi Nagar ) Under Shahdara ( S ) Zone.
Tender Value
9.04 Lakhs
Estimated cost
Bid Submission
15 Mar 2022
0 days left
EMD
18100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shahdara → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of 3 Nos. Of Shml Pole At Patel Park Laxmi Nagar And Safeda Park ( Gyan Kunj ) Laxmi Nagar And Park At Pnb Colony Bank Enclave In Ward No. 14-E ( Laxmi Nagar ) Under Shahdara ( S ) Zone.
BOQ
| Sl. No. | Item Description |
| 1 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 2 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 3 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm |
| 5 | Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal)size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 6 | Supply of 2x10 sq mm XLPE insulated PVCSheathed aluminiumconductor armoured cable of 1.1 KV gradeconforming to IS-7098 as required. |
| 7 | Fabrication , Supplying,Installation,testing,Commissioning of 12 mts.high mast System with its accessories ,Mast shaft shall be in one section , hot dip galvanized not less than 4 mm thick (Single dip ) inside and out sides and suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circumfrential weld. It should also included accessories For High Mast head frame ,2 point suspension system with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos. flood lightluminaries symmitrically And its control gears boxes and lighting finial ,the mast shall have integral manual type mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panel housing suitable RCC(1:2:4) shallow foundation of size 1m(L)x1m wide and 2 mtr deep I/C excavation of earth , providing cutting,bending and placing in position ,reinforcement of cold twisted bars of 12 mm dia -2100 mm long(approx)-16 nos and reinforcement of cold twisted bar of 8mm dia -3700 mm(approx) -13 nos (with 150mm spacing) as reqd with positioning of foundation bolts and providing DWC HDPE pipe for cable entry or exit as required for the high mast considering the safe soil bearing capaciy at site as 10T/sqm at 2 mts .Depth with all material i/c 4 Nos S.P MCB ,63 A Dp Isolator etc as reqd Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS |
| 8 | \"SITC of 150w LED Flood Light luminiare fitted with lens,madeof pressure die cast aluminum housing & toughened glass cover complete with the following specification as reqd.(a) Total system wattage = 150 watt+/-5%(b)Total Lumens output>=15000 lumens (c) Luminaire Efficacy>=100 Lm/w(d)power factor>=.95(e) Protection Class-IP-66 \" |
| 9 | Supply and fabrication of pole protection system made up of 8SWG steel wire mesh of size25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc as reqd. |
| 10 | Supply and Laying for sub main with 6 sqm size of WP twin core Al conductor cable as reqd |
| 11 | Supplying of following rating,Double pole(single phase and netural),240 V,residual current circuit breaker(RCCB),having a sensitivity of current 30mA in the existing MCB DB complete with connections,testing and commissioning etc as required. A) 25 Amp |
| 12 | Supply and fixing of 32 mm dia. G.I. Pipe (Medimum class) 1 mtr. Long bracket i/c wiring with 2.5 sq. mm copper conductor wire as required. |
| 13 | Supply installation testing and commissioning of 30 watt LED street light luminare fitted with lens made of pressure die cast aluminium housing and touighened glass cover i/c mounting bracket complete with following specifications.a) LED wattage 30+/-5%, b) Luminaries efficacy >100 lumens/watt, c) Pf. >0.95,d) Protection – IP 66 |
AI Tender Summary
Tender Timeline
Mar 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 16, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender