}

P / L Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At New Khyala Road Near Sulabh Complex Under Sub Division Wr 15 Division Wr 1 Dg. 2021 22. P / L Rmc At Kachha Berm Portion And Improvement Of Adjoinin, Delhi-Delhi

Public Works Department-PWD has published P / L Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At New Khyala Road Near Sulabh Complex Under Sub Division Wr 15 Division Wr 1 Dg. 2021 22. P / L Rmc At Kachha Berm Portion And Improvement Of Adjoinin. Submission Date for this Tender is 15-03-2022. Footpath Work Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

31375657
P / L Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At New Khyala Road Near Sulabh Complex Under Sub Division Wr 15 Division Wr 1 Dg. 2021 22. P / L Rmc At Kachha Berm Portion And Improvement Of Adjoinin
Open Tender
Indian
Delhi
Delhi
15-03-2022

Tender Details

P / L Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At New Khyala Road Near Sulabh Complex Under Sub Division Wr 15 Division Wr 1 Dg. 2021 22. P / L Rmc At Kachha Berm Portion And Improvement Of Adjoining Footpath To Prevent Air Pollution Control At New Khyala Road Near Sulabh Complex Under Sub Division Wr 15 Division Wr 1 Dg. 2021 22.

Key Value

Document Fees
Refer document
EMD
INR 57659.0 /-
Tender Value
INR 28.82 Lakhs /-

BOQ Items

Name of Work: P/L RMC at kachha Berm portion & improvement of adjoining Footpath to prevent Air Pollution Control at New Khyala Road near Sulabh Complex under Sub-Division WR-15, Division WR-1 dg. 2021-22.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
2All kinds of soil
3Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.” Note :Excess/less cement used than specified in this item is payable/ recoverable separately. All works upto plinth level :
4M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)
5Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of theEngineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
6All works upto plinth level
7Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
8Cement mortar 1:6 (1 cement : 6 coarse sand)
912 mm cement plaster finished with a floating coat of neat cement of mix :
101:4 (1 cement: 4 fine sand)
11Paintingwithsyntheticenamelpaintofapprovedbrandand manufacture to give an even shade :
12Two or more coats on new work
13Disposal of building rubbish / malba / similar unserviceable, dismantled orwastematerialsbymechanicalmeans,includingloading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
14Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
15Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer"s specifications & direction of Engineer- in-Charge.
1660mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.
17Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on bothways,neatcementpunningonfinishedsurface,properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
18Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
19H D - 20. Circular shape 560 mm internal diameter
20Providing and laying unplasticized 300 mm nominal dia PVC pipe ( press 10 kg per metre) conforming to IS: 12818 including testing of joints etc complete for drainage of carriageway water under footpath as per direction Engineer-in-charge.
21Add @ 21.46%Cost index on DSR Items Except Item No. 12 = (2717292.00 x 15.68%) (As per GNCTD Circular)
22Less @ 9.5% on DSR ItemExcept Item No. 12= (2717292.00 + 426071.00 = 3143363.00 x 9.5%) (As per GNCTD Circular)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail