}

Redevelopment Of Barahi Talab Faridabad With Dlp Two Yrs And Including Operation And Maintenance For Five Year Under Scm, faridabad-Haryana

Urban Local Bodies has published Redevelopment Of Barahi Talab Faridabad With Dlp Two Yrs And Including Operation And Maintenance For Five Year Under Scm. Submission Date for this Tender is 21-03-2022. Lake Development Tenders in faridabad Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

31373161
Corrigendum : Redevelopment Of Barahi Talab Faridabad With Dlp Two Yrs And Including Operation And Maintenance For Five Year Under Scm
Open Tender
Indian
Haryana
faridabad
21-03-2022

Tender Details

Redevelopment Of Barahi Talab Faridabad With Dlp Two Yrs And Including Operation And Maintenance For Five Year Under Scm

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 15-Mar-2022 CorrigendumI Date 21-03-2022

Key Value

Document Fees
INR 1000 /-
EMD
INR 2200000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REDEVELOPMENT OF BARAHI TALAB, FARIDABAD WITH DEFECT LIABILITY PERIOD OF TWO YEARS & INCLUDING OPERATION AND MAINTENANCE FOR 5 YEARS UNDER “SMART CITY MISSION
Sl. No. Item Description
1DISMANTLING
2Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead
3Horticulture Work
4Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Terminalia arjuna (Arjun),Minimum 3.5m overall height,Minimum 60mm caliper, Multibranding at 2.00m
5Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-Azardita indica (Neem),Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar
6Supply & Install Shrubsinclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-GOLDEN BOTTLE BRUSH ,Minimum 1500mm height@300mmc/c,Bushy, Multibranching.
7Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-JACARANDA MIMOSIFOLIA,NEELA GULMOHAR,Minimum 3.0/3.5m overall height,Minimum 60mm caliper,Multibranching at 2.0m from collar.
8Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting BAUHINIA BLACKEANA (KACHNAR), Minimum 3.5/4.0m overall height, Minimum 55-60mm caliper, Multibranching at 2.0m from collar
9Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting CASSIA FISTULA(AMALTAS) Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar
10Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting PELTOFORUM FERRUGILUM Minimum 3.5/4.0m overall height, Minimum 60mm caliper, Multibranching at 2.5m from collar
11Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting ROYESTINIA REGIA,Minimum 3.5m overall height, Minimum 100mm caliper,5 fronds.
12Supply & Install Trees/ Palms inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% concentration(5 ml/liter water) as required iii). Flooding the pit with water after making kiaries where required iv). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting PHEONIX PALM,DATE PALM,Minimum 2.5m overall height, Minimum 100mm caliper,min. 8 fronds
13Supply & Install Shrubsinclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-HIBISCUS ROSA PROLIFIC,Minimum 600mm height@600mmc/c, Bushy, Multibranching
14Supply & Install Shrubsinclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-IXORA CHENENSIS,Minimum 600mm height@600mmc/c,Bushy, Multibranching, Flowering
15Supply & Install Shrubsinclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-NERIUM OLEANDER ALBUM,Minimum 900mm height@900mmc/c,Bushy, Multibranching, Flowering
16Supply & Install Shrubsinclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting-CESTRUMNocturnum,Minimum 600mm height@900mmc/c,Bushy, Multibranching, Flowering
17Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-PLUMBAGO CAPENSIS,Minimum 3 runners per plant.
18Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-VERBENA VOILET,Minimum 150mm height @200mmc/c,Minimum 3 runners per plant.
19Supply &Install ground covers/ Shade plants inclusive of: i).Removal of rubbish/ all construction debris /site trash, and surplus earth inclusive with all leads and lift. ii). Treat the pit with Chloropyriphos solution of 0.5% oncentration(5 ml/liter water) as required iv). Flooding the pit with water after making kiaries where required vi). Fertilise the pit by adding DAP 50gm, MOP 25 gm, 50gm neem oil cake and 50 gm stearameal per pit at the time of planting.-WEDELIA TRILOBATA,Minimum 3 runners per plant,Minimum 150mm height @200mmc/c.
20Providing aquatic plants such as Lotus,Duckweed,Cannas,water poppies andvetiver grass including transportation,unloadingand fixing at site as per requirement of engineer -in -charge.
21Providing & installation of Dustbin of good quality (ISI Mark), confirming to IS-12402, material-LLDPE, Bin capacity/volume-100 Ltr, green colour,wall non-perforated, LID-swing type, UV ressistance, Towage/Gripping provision, Plugged outlet for washing & draining, Dustbin stand with single compartment - at designated places in park.
22Providing and fixingand installing gazebo-AREA = 18 X 18 FEET , CAST IRON GARDEN GAZEBO I GN 11704 I 75 MM PIPE , CAST IRON 10 MM , 9FT HIEGHT , FIBER ROOF. Includingall civil ,electrical,drainage and lighting work as /site engineer. And dwgs
23Landscaping & Play Equipment
24Landscpaing Features
25Providing and fixing in playequipment , including excavation of 0.45 x 0.45 x 0.45 m size pit and fixing the each supporting leg / anchoring arm of playing instrument in 1:11/2:3 grade concrete block of 0.45 x 0.45 x 0.45 m size including curing etc. complete including providing for epdm flooring at all fall areas (min 1.50x 1.50 m )A-Multi activity play equipment with straight tube slide of 3" ht, small wave slide 3" ht with slide entry, an railing with abacus play system, an FRP steps to climb to a metal sq deck with canopy.-Play zone 35" x 25"-Max platform ht 3"-Age group 3-6 yrs
26Providing and fixing Tri basket, Area :2.0m Dia Safe Play Area : 3.5m Dia (11.5ft Dia) Ideal For 5-14Years,Friends at a time :4-6 on suitable location at near Snatan Mandir park
27Providing and fixing Elephant see - saw Product Area :0.4m X 0.75m,Safe Play area:1.4m X2m,Ideal For : 3-8 YearsFriends at a time :2, on suitable location at near Snatan Mandir park
28Providing and fixing Standard See-saw, Product Area : 2.5m X 0.3m, Safe Play Area :3.5m X1.3m, Ideal For :4-10 Years, Friends at a time : 2 no.on suitable location at smart park
29Providing and fixing Double Post Swing,Area : 3.5m x 1.0m,• Safe Play Area : 4.5m X 2.0m • Ideal For : 4-14 Years, Friends at a time : 2 on suitable location at smart park,
30Sanitary work
31P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved make and heavy as per direction of Enginner-in- Charge
32Providing & Fixing premium qulaity W.V.C. Urinal Partition plate of size 630x315 mm
33Supplying and fixing of fully automatic ss "No Touch"Hand drier suitable tooperate on 230 volts, singlephase 50Hz, A.C. power supply and directly plugged to power point complete.
34PUMP
35Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M ,Shaft SS 410,mechanical seal with 10M Power & Control cable , 5M Galvanized Chain,,10M, 50mm MS galvanized Guide pipe, Duck FootBend, with Guide wire SS 304 etc. complete with all respect as per specification. Discharge 36 cum/hr and head 16 to 20 M
36Supply and Jointing of 4mm2 submersible cable (copper) CRI make (FINDEX) POLYCAB, ECAO & BUNTON) complete in all respect as per HSR 31.59.
37Supply 4”x10’ long GI pipe make Jindal – B both side threading & fixing MS flenge and welding complete in all respect. As per HSR 28.52.
38Lowering of submersible motor pump complete in all respect
39Labour charges for making tee connection with existing line complete in all respect.
40(a)    2” Pump Nipple new making with flenge
41(b)   2” MS clamp HD
42(c)    Pannel box Hut (MS)
43(d)   7.5 HP control panel CS make complete in all respect
44(e)   4” Tee C.I (4”x4”x4”)
45(e)   4” Tee C.I (4”x4”x2”)
46(f)     4” Duck foot bend
47(g)    4” CI bend
48(h)   4” Vertical pipe with Flenge
49(i)      4” Horizontal pipe with Flenge
50(j)     Rubber sheet
51P/F cast iron double flanged sluice valve PN- 1.6 marked with I.S : 14846 including nuts and bolts marked with I.S 1363 etc. carriage loading, unloading stacking, handling, Re-handling etc. complete in all respect to the satisfaction of Engineer—in-charge (Makes AARKO, VENUS, LEADER, BIR, PANJA, UPADHAY) as per HSR 28.10 (A) 100mm internal diameter of valve
52P/F cast iron double flanged saluce valve PN- 1.6 marked with I.S : 14846 including nuts and bolts marked with I.S 1363 etc. carriage loading, unloading stacking, handling, Re-handling etc. complete in all respect to the satisfaction of Engineer—in-charge (Makes AARKO, VENUS, LEADER, BIR, PANJA, UPADHAY) as per HSR 28.10 (A) 50mm internal diameter of valve
53P/F cast iron double flanged Swing check type reflux (Non return) valves PN- 1.6 marked with I.S : 5312 including nuts and bolts carriage loading, unloading stacking, handling, Re-handling etc. complete in all respect to the satisfaction of Engineer –in-charge (Makes AARKO, VENUS, LEADER, BIR, PANJA, UPADHAY) as per HSR 28.10 (A) 100mm internal diameter of valve.
54Fountain
55Supply, Installation, Testing & Commissioning of Brass/ Gun Matel Vertical 1" Outlet Jet Nozzles Standard.etc., complete -
56Supply, Installation, Testing & Commissioning of White ABS plastic bottom inlet 2" for concrete with S.S. screws and regulable .. Flow/ inlet = 9,000 l/hr.
57Supply, Installation, Testing &Commissioning of Power Supply,
58Supply, Installation, Testing & Commissioning of TOTALLY ANTI-CORROSIVE Bobbin Wound filter,400mm diameter. Fitted with pressure gauge panel manual air bleeder, water drain and emptying plug.fitted with collector arms and diffuser made from unplasticizedPVC and polypropelene .etc., complete. Max.EN ISO 9001 :2000 Standard.working pressure : 2.5 kg/cm². Flow rate = 6m³/hr.
59Sand for Sand Filter (SIZE 16/32 Mesh)
60Supply, Installation, Testing & Commissioning of Online ChlorineDosing Unit for chlorine made in ABS Plastic
61Supply & Commisioningof control panel complete as required. MCC - 1as described above and below.etc., complete Contactors,Push Button & Indicators,Selector Switch,Ammeter,Volt Meter, Lugs, Wires, Enclosure,Centrifugal Pump and power supply and automation for pump.
62Providing & fixing of Wires/cablesof various sizes including necessary accessories
63Providing and fixing of pipes (uPVC pipe- 10 kg. Pressure) & fittings (Heavy)
64Providing & fixing of Valves, fittings etc of required size-
65supply and installation of water fall of 10 mtr wide and 6 mtr high as per dwg for areation of pond incudilng all civil work and finishing incuding water proofing, all plumbing, valve all eposy treatment ,Outlet Jet Nozzles as per approval of Engg incharge
66Supply, Installation, Testing & Commissioning of sensor for automation of sump well change room and strom water sump well with all nessccessary connection in allrespect
67Electrical
68MAIN CUBICAL PANEL / STREET LIGHT CONTROL PANEL P/F testing & commissioning of kiosk type weather proof out door main cubical panel size 750 mm X 1250 mm X 500 mm (app.) made out of 14 gauge MS sheet front and back both side openable duly hinged door with locking arrangement by providing both side held draft and all required hard wares. The cubical should be dust and vermin proof followed by coat of zimpholite primer and finally two coats of enamal gray paint. The cubical should be mounted with hard ware on angle iron frame size 50 X 50 X 6 mm and 1500 legs duly painted framed be grouted 750 mm below ground level with cement concrete 1:3:6 in 1000 X 500 X 600 mm and providing brick masonary along angle iron frame above G.L. They shall be in two section comprising as follows: (i) Providing & Fixing 415 V ,TPMCCB 100 Amp. rating for incoming supply. (ii) Providing fixing timer switch TSQ 100 series 240 Volts, and full running service standred mounting with base of L & T or equivalent make including the cost of contactor 63 amp. 50 Hz. 440/400 volt. (iii) P/F open busbars 25mmX3mm of required length duly covered by heat shrinkable sleeves with busbar supporters (iv) Provision for residual current operated 63 Amp. 1 Pole ELCB of 30MA to 300 MA sensitively as required including making connections etc.(EE/Load stop make) (v) P/F 2 Nos. 415 Volts TPN MCCB,63 Amp. Rating for outgoing cable and making connection etc. also to have a provision for two nos. above switchs. (vi) P/F of 3 nos. RYB phase indicator resitance type complete with lamp P/F of HT danger plate of size 200 X 150 mm made of aluminium sheet 20 gauge. (vii) P/F cable glands double compression type and Al. lugs duly crimped for incoming cable and out going Cables. (viii) Providing 2 Nos. earth terminals including lugs and H/W duly inter connected with 8 SWG copper wire . (ix)Inter connection of main busbar to each out going switch and cable terminal shall be with 4 sqmm PVC copper conductor duly crimped with AL lugs. (x) Cable termination shall be fixed at backside of the panel with H/W and spring washers (xi) Light control switch with photo senser complete unit as required
69Supply ofLT XLPE Armoured 4 core, 25 sqmm AL cable
70Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm
71Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 25 sq. mm (28mm)
72Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.
731 x 1.5 sq. mm
742 x 2.5 sq. mm
75Maintenancefreegelearthingwithpipeinpipe/Strip inPipe technologyfilledwithanticorrosiveconductivecompound(CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC shouldhavehygroscopicpropertytoretainthemoistureforlong timetocreatelowresistanceZone)andC.C.finishedchamber coveredwithhingetypewithlockingarrangementC.Icover.C.I. frame of size 300mm x300mm complete testing of earth resistance asrequiredoffollowingsizesWithpipeinpipetechnology(inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating With pipe in pipe technologywith 80-100 micron G.I. coating G.I. pipe3000 mm long , 80/40 mm , terminal 14 mm G.I. strip
76S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
778 SWG G.I. Wire
7825mm x 3mm G.I. Strip
7925mm x 6mm G.I. Strip
80Designing, Supply, Install, Testing and commissioning oflight pole with 8 nos. 360 degreeadjustable LED luminaires (IP 66) of minimum 45 W and with feeder pillars for proper distribution of power to lights in the Barahi Talab. Provision for dimming solution of each pole and controlled from Command Control Centre with LORA gateway. Pole should be made of GI of minimum 150 mm inner dia. and height of 9 Mtr. with powder coating minimum thickness of 50 µ of colour with as per Engineer -in-Charge. The shape of pole shall be tubular consisting of 150mm, 100mm as per the drawings. Detail designing and execution of foundation has to be done as per approved by Engineer - in - charge.
81Supply, installation, testing and commissioning of Post Top Light Pole with LED luminaires (Min. IP 66) with feeder pillars for proper distribution of power to lights along the road. Pole should be made of GI of height 5 metre with powder coating minimum thickness of 50 µ. The LED strlight luminaire shall be such that it provides adequate lighting.
82Supply, Install and fixing of linear wall washer & complete with all acceessories integrated with 12 w LED and High pressure aluminium die-cast and alloy body, anodised surface. with Clear lines, and High efficiency PMMA optical lens with tempered glass diffuser. Adjustable mounting bracket, simple installation. Silicone rubber leakproof structure design to ensure the high level of IP rating(IP 65). Luminaire provided with external driver, low voltage at 24Vdc assures safety. (Dimension : 500 x 25 x 75mm approx.)
83Supply, Install and fixing of ground luminaire complete with al accessories integrated with 13 W LED luminaire made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content. IP 67. (Dimension : Dia. 200 x 200 mm approx.)
84Supply, Install and fixing of ground luminaire complete with all accessories integrated with 6 x 3 W LED luminaire made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content.IP 67.(Dimension : Dia. 200 x 75 mm approx.)
85Supply, Install and fixing of niche light integrated with 3 W LED luminaire made up of polycarbonate and Suitable for operation on 240V, 50Hz single phase ac supply. .IP 65.(Dimension : 125 x 75 x 100 mm approx.)
86Supply, Install and fixing of ground luminaire complete with all accessories integrated with 3 x 2 W LED luminaire made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content..IP 67.(Dimension : Dia. 125 x 75 mm approx.)
87Supply, installation, testing and commissioning of circular BOLLARD: Outdoor type,Integral LED lamp, Decorative, Luminaire: Non corrosive Aluminium, Aluminium plate for bolting onto foundation.Robust Design, High Luminous efficiency at reduce wattage, Cable entry for main supply cable. Earthing connection provision shall be provided. Minimum protection of IP 65. Operate on 240V, 50 Hz AC supply. Earthing term.inals for earth connection, Rating: 8W LED. Height 900 mm
88Supply, Install and fixing of downlighter with all accessories integrated with 24 W LED luminaire and waterproof power supply made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content..IP 65.(Dimension : 1000 x 25 x 75 mm approx.)
89Supply, Install and fixing of drive over light integrated with 2x 3 W LED luminaire and waterproof power supply made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content.Step tempered glass of 7mm thickness with static load resistance of >= 2000 kgs..IP 67.(Dimension : Dia. 50 x100 mm approx.)
90Supply, Install and fixing of grass uplighter complete with all accessories integrated with bracket and 7 W LED luminaire made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content. .IP 65.
91Supply, Install and fixing of downlighter (inclusive of complete accessories) integrated with 7 W LED luminaire made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content.IP 20.
92Supply, Install and fixing of Flexible LED strip light (inclusive of complete accessories) integrated with 6W/m LED .IP 65.
93Design, Supply, Transportation, Delivery and Installation of a Solar Tree with Battery Backup to cater to a 3kW load for 8 hours backup 1. Mono or Multi-crystalline Silicon Modules (>250W) 2. Structure for Modules Mounting on top of the Superstructure 3. Storage Battery (Low Maintenance Solar) complete with accessories 4. Power Conditioning Unit(s) 50Hz, RS485 Connectivity. 5. Array Junction Box, Main Junction Box 6. AC Distribution Board, MCB, Voltmeter. Ammeter, Kwh meter and other BOS items as required for complete system. 7. Remote Monitoring System
94Foundation of High mast pole of 16mtr high as per Manufacturer specification with RCC including cost of Steel, sand cement & grit as required.
95P&FofIP-66protectedhighpowerLEDfloodlight systemwithextruded aluminiumhousing,toughened glassdiffuserwithsuitablelensesonLEDtoachieve various beam angles, 240 volt, 50Hz, of high power LED lamps supplied with pre wired cable of 1 mtr. Integrated drivershallbehighefficiencyhavingefficiencymore than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumenbe maintained. Light output in red , green , blue, cool white or warm white colour as per engineers choice. Fixtures shall be CE compliance High power LED flood light 120 watt
96Supplying & erecting T8 LED 20W tube lightfitting (4 feet) with aluminium housing, heatsink, integrated HF electronic driver complete(including lamp).
97Supplying and fixing brass batten/ angle holder including connections etc. as required.
98Supplying & erecting LED 9W bulb
99Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B
100Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
101Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
102Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
103SITC of walll / free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc / red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU / Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator).
104Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. Electrolytic grade aluminium bus bar
105SF of (0-500) V range Volt meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type
106SF of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital Type, Below 500 A
107SF of Current Transformer , with all necessary support in existing panel including connection etc. as required . up to 150 / 5 Ratio , 5 VA , class 1 accuracy
108SF of 240/220 V, LED (22.5 mm dia ) Pilot lamp with integral circuit, terminal block, including connection etc. as required.
109Red / yellow / Green colour
110Blue colour
111SITC of IP 68 rated underwater light having Toughened & scratch resistant with one hand operated switch and Built in battery charger. Including protection from Short circuit, battery over-discharge, battery overcharge and reverse polarity. Lumen not less than 700, CCT 3000k, minimum life 50000 hours, and all necessary accessories
112P/Laying P.V.C./ XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 95 Sqmm, 3.5 Core
113Supplying andmaking oneend termination with heavy duty double compression brass gland SIBG type, heavy dutycopper lugs duly crimpedwithcrimpingtool,PVCtapeetcforfollowingsizeof Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 3.5 x 95.0 sq.mm
114Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 11K.V.Earthed with Stranded Compacted Circular AluminiumConductor, Conductor Screened with ExtrudedSemi-conductingcompound,XLPEInsulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up,innersheathofThermoplastictape,galvanisedflat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable direct in ground including excavationof30cmx100cm size trench,25cm layerof river sand, second Class bricks covering, refilling earth, 3 core 95.0 Sq.mm
115Providing &makingheat shrinkabletype indoor/outdoor/straight throughterminations/jointkitofapprovedmakesuitableforXLPE insulated33KVcable,withrequiredcomponents,preprationof cable ends, testing etc. as required of following sizes.
116Indoor: 3 core 95/120/150/185 Sq.mm
117Outdoor:3 core 95/120/150/185 Sq.mm
118Shifting of Existing transformer from 100 KVA to 315 KVA rating from one place to another by opening HT/LT Connection and after shifting again making connection including cost of crane for shifting, T& P etc as required.
119Supply,Installation,testingandcommissioningof11KVDouble PolestructureWithAirBreakSWITCHhavingfollowing specifications : (a) DP : Double pole structure made of two nos. 9 meter long PCC poles (400 Kg)& 7 nos. MS Channel each of size 100 mmx50mmx2500mm complete with earthing of the structure as per REC standardsin all respect with nuts, springs washers, clamps as required. (b) GO:Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3 phase, central post rotating double break isolator complete with MS hardware , copper moving & fixed contact ,assemblyof9Nospininsulator, GI pipe of suitable length for operations (c) DO:3nos Vertical / Horizontal mounted 11kv horn gapfuse set /drop out 11kv barrel fuses mounted on 6no pin insulators (d) LA:3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv oh linewith rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc as required. (e)JUMPERS:3no11kvacsrconductorsmountedonpintype insularors as required. GENERAL:The go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’
120Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head 15. 00 m as per the indicated requirements of discharge in LPM and power capacity in BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) Discharge Power Capacity Capacity (10000 LPM) (50BHP)
121Civil work maintenance cost for 5 years
122Electrical,plumbiing,Sanitary,water supply etc, work maintenance cost for 5 years
123Maintainence Cost of Horticulture works for 5 years
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail