Irrigation Department has published Constructing A Running / Walking Track Along Right Side Of Balsamand S / Br. From Rd 85000 To 97680. Constructing A Running / Walking Track Along Right Side Of Balsamand S / Br. From Rd 85000 To 97680.. Submission Date for this Tender is 14-03-2022. Road Work Tenders in hisar Haryana. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. as per HSR item No. 4.14.1 @ 93/- |
2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. (HSR item No.4.12.1) |
3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level. 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size) as per HSR item No 6.1.6 @ 2735/- |
4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level.1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) as per HSR item No. 6.1.2@ 3892/- |
5 | Providing and fixing cramps of required size & shape in RCC/ CC I Brick masonry backing with cement mortar 1 :2 ( 1 cement :2 coarse sand) for Stainless steel cramps, including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). (HSR No.8.6.2) |
6 | Providing and laying 80mm thick factory made cement concrete inter1ocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge as per HSR item No. 10.77 @ 713.00/- per Sqm |
7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per HSR item No. 13.29.2 @ 93.00/- per Kg |
8 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1 :3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½ :3 (1 Cement: 1½ coarse sand (zone-111) : 3 graded stone aggregate 20 mm nominal size) as per HSR item No. 6.39.1 @ 4631.00/- per Cum |
9 | Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in. Cement mortar 1:4 (1 cement: 4 coarse sand) as per HSR item No. 7.21.1 @ 4135.00/- per Cum |
10 | 12 mm cement plaster of mixin 1 :4 (1 cement: 4 fine sand) as per HSR item No. 11.5.3 @ 94/- |
11 | Providing and Fixing cement concrete bench |
12 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m (New HSR-2021) Item no 4.4.1 |
13 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer M.S Tube (New HSR-2021 Item No. 13.42.1 @ Rs 120/- |
14 | Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage ofwater and duly reinforced by 2 Nos. vertically and 1 Nos. horizontally 50.x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat UN coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment). (New HSR-2021 item No. 12.145)@ Rs. 4119 |
15 | Brick masosnary with common burnt clay non modular C.M 1:4 in superstructure aboveplinth level up to Floor IV Level (New HSR-2021 item No. 7.22.1)@ Rs. 4320 brick bats. |
16 | Cement conc. 1:3:6 with stone aggragate (40mm) in foundation and plinth (New HSR-2021 item no. 6.1.5 @ Rs. 3221/- |
17 | Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works(New HSR-2021 item no. 11.68.3 @ Rs. 22/- |
18 | Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.(New HSR-2021 item no. 11.78 @ Rs. 35/- |
19 | Providing and laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement sluny mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1 :4 (1 cement :4 coarse sand) Dark shade pigment using ordinary cement (HSR item No. 10.29.3) |
20 | Providing & fixing 4 no.s, 50 kg each seating benchs, Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (New HSR item No. 13.30.2 ) @ 132.00/- per Kg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail