Rehabilitation And Up Gradation Of Neyyassery - Thokkumbansaddle Road ( Length Of 29.196 Km ) In Idukki District Rehabilitation And Up Gradation Of Neyyassery - Thokkumbansaddle Road ( Length Of 29.196 Km ) In Idukki District, Idukki-Kerala

TDR : 31370350

Tender Notice
Corrigendum Details
BOQ

Expired

Idukki , Kerala

Tender Brief : Corrigendum : Rehabilitation And Up Gradation Of Neyyassery - Thokkumbansaddle Road ( Length Of 29.196 Km ) In Idukki District Rehabilitation And Up Gradation Of Neyyassery - Thokkumbansaddle Road ( Length Of 29.196 Km ) In Idukki District

Document Fees
Refer document

EMD
Refer document

Tender Value
₹ 132.97 Crore /-

Submission Date
22-04-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	01-04-2022	Prebid meeting Link	Other	22-04-2022

Name of Work: Rehabilitation and Up gradation of Neyyassery - Thokkumbansaddle Road (Length of 29.196 Km) in Idukki District

Sl. No.	Item Description
1	Bill No. 1SITE CLEARANCE AND DISMANTLING
2	Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned including removal and disposal of top organic soil not exceeding 150 mmthickness with all lead & Lift , all complete as per Technical Specification Clause 201.
3	Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead - By Mechanical Means as per MoRTH Specifications Clause 202
4	Plain Cement Concrete
5	Reinforced Cement Concrete
6	Dismantling RCC work of Culverts
7	Dismantling RCC work of Bridges
8	Dismantling of flexible pavements / Non bituminous base/sub-base courses and disposal of dismantled materials with all lead and lift, stacking serviceable and unserviceable materials separately Bituminous course - By Mechanical Means as per MoRTH Specifications Clause 202
9	Pavement Bituminous courses
10	Non bituminous base/sub-base courses
11	Removing all type of hume pipes and stacking within a lead of 1000 metres including earthwork and dismantling of masonry works.
12	Above 900mm
13	Removal of stumps and roots of girth above 300mm and back filling to required compactionwith all lead & lift ,all complete as per Technical Specification Clause 201 and 305.
14	Girth from 300 mm to 600 mm
15	Girth from 600 mm to 900 mm
16	Girth from 900 mm to 1800 mm
17	Girth above 1800 mm
18	Bill No. 2EARTH WORK
19	Excavation for roadwork in all type of soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead all complete as per Technical Specification Clause 301.
20	Excavation in all types of soils
21	Ordinary Rock
22	Hard Rock with rock breakers (blasting prohibited) with mechanical means
23	Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300-2 and as per drawings and MoRTH Specifications Clause 305
24	Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 and as per drawings and MoRTH Specifications Clause 305 & 408
25	Loosening of the ground upto a level of 500 mm below the sub-grade level, watered, graded and compacted in layers to meet requirement of Table 300-2 for Compacting original ground supporting sub-grade construction and as per MoRTH Specifications Clause 305
26	Bill No. 3GRANULAR SUB-BASE AND BASE COURSES
27	Construction of granular sub-base by providing close graded material conforming to grading-V of table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of Technical Specifcations.
28	Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam Specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRTH Specification Clause 406.
29	Bill No. 4BITUMINOUS / PQC COURSES
30	Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means all complete as per Clause 502.2
31	Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg/sqm on the prepared bituminous/granular surface cleaned with mechanical broom all complete as per Clause 503.
32	Providing and laying dense bituminous macadam with 80-100 TPH HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (VG 30) @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specification Clause No. 505 complete in all respects. Grading - I (37.5 mm Nominal Size)Note : The Binder content specified shall be minimum 4.0 % but will conform to requirement as per JMF. No additional cost shall be paid to the actual Binder Content as required in JMF.
33	Providing and laying Bituminous Concrete Grade II with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with Bituminous Binder minimum 5.4 % VG-30 grade, of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects..Note The Binder content specified shall be minimum 5.4% but will conform to requirement as per JMF. No additional cost shall be paid to the actual Binder Content as required in JMF
34	Bill No. 5 Culverts
35	Earth work in excavation of foundation of structures including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material in all types of soil with all lifts and leads complete as per Drawings and Technical Specification Clause 304.
36	Back filling behind abutments, wing walls and return walls with selected granular material of approved quality complete as per Drawing and Technical Specifications Clause 305.
37	Providing and laying of Filter media
38	with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.
39	underneath Cement Concrete blocks of size 0.3x0.3x0.3 m cast in Cement Concrete block complete as per Drawing and MoRTH Specifications Clause 2504.
40	underneath pitching in slopes complete as per Drawing and MoRTH Specifications Clause 2504
41	Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100 PCC Grade M15
42	Providing & Laying Reinforced Cement Concrete ofM35 Grade in Open Foundationincluding formwork but excluding reinforcement complete as per Drawing and Technical Specification Sections 1000, 1500, 1700 and 2100.
43	Providing & Laying Reinforced Cement Concrete ofM35 Grade in Substructureincluding formwork but excluding reinforcement complete as per Drawing and Technical Specification Sections 1000,1500, 1700 and 2200.
44	Furnishing and Placing RCC/PSC Grade M35in solid slab super-structureas per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2300.
45	Supply, Fitting and Placing coated HYSD bar Reinforcement (Fe 500 D) complete as per Drawing and MoRTH Specifications Section 1000 and 1600.Foundation / Sub-structure / Superstructure
46	Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V : 20H towards draining face complete as per Drawing and MoRTH Specifications Clause 2706
47	Provision of Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all complete as per drawing & Technical Specifications Clauses 809 & 811 and Sections 1000, 1500, 1600, 1700 and 2200.
48	Providing and fixing in position drainage spouts using 100mm dia GI pipe ,complete as per drawings and Technical Specifications Clause 2705.
49	Providing and laying in position 65 mm thick wearing coat consisiting of 40 mm bituminous concrete over a 25mm thick layer of mastic asphalt over deck slab after applying prime coat complete as per drawings and MoRTH Specifications Sections 500 and 2700
50	New Construction
51	Rehabilitation and repair of existing culverts
52	Plain/Reinforced Cement Concrete in head wall complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700, 2100, 2200 & 2300PCC Grade M20
53	Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm ( in traffic direction), covered with a closure plate of 200 mm x 6 mm of weldable structural steel conforming to IS: 2062, asphaltic plug to consist of polymer modified bitumen binder, carefully selected single size aggregate of 12.5 mm nominal size and a heat resistant foam caulking / backer rod, all as per approved Drawings and MoRTH Specifications Section 2600
54	Providing and fixing of lifting MS hook capacity of 150 kg as directed by the Engineer as per approved Drawings and MoRTH Specifications Section 1600
55	\"Providing and fixing of Iron Step U shaped 20mm dia MS bar with capacity of 150 kg as per approved Drawings and as directed by Engineer
56	Providing, laying & jointing RCC NP4 pipe including testing complete as per Drawing & MoRTH Specifications Section 1000 and 2900.1200mm dia
57	Sand Filling in Foundation Trenches as per Drawing & MoRTH Specifications Clause 1210
58	PCC M15 Grade leveling course below approach slab complete as per Drawing and MoRTH Specifications Section 1500, 1600 and 2700.
59	Reinforced Cement Concrete Grade M30 approach slab including reinforcement and formwork complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1600 and 2700.
60	Cement Concrete Blocks (size 0.5 x 0.5 x 0.5m) Providing and laying of apron with Cement Concrete blocks of size 0.5x0.5x0.5 m cast in-situ and made with nominal mix of M-15 grade Cement Concrete with a minimum cement content of 250 kg/cum as per IRC:21, MoRTH Specifications Clause 2503 and Sections 1000 & 1700.
61	Flexible Apron:Providing and laying of boulder apron on river bed for protection against scour with stone boulders as per Technical Specification Clause 2503.2
62	Providing Plain Cement Concrete M 15 for Encasing and Curtain wall etc. including formwork but excluding reinforcement complete as per drawing, Technical Specification Sections 1000,1500, 1700 and 2100.
63	Providing and laying Pitching on slopes laid over prepared filter media including boulder Stone/Boulder apron laid dry in front of toe of embankment complete as per Drawing and MoRTH Specifications Clause 2504
64	Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100. RCC Grade M30 - Using Batching Plant, Transit Mixer and Concrete Pump
65	Plain/Reinforced Cement Concrete in sub-structure complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2200. RCC Grade M30 - Height upto 5m - using Batching Plant, Transit Mixer and Concrete Pump
66	Supply, Fitting and Placing coated HYSD bar Reinforcement (Fe 500 D) complete as per Drawing and MoRTH Specifications Section 1000 and 1600b) Sub-Structure
67	Cleaning and removal of vegetation growth from structures, channel and protective works as per directions of the Engineer.
68	Repair of Existing Bridges by Cement Mortar 1:3 Plastering all complete as per MoRTH Specifications Section 1300.
69	Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per directions of the Engineer.
70	Plain/Reinforced Cement Concrete in barrier complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100PCC Grade M20
71	Bill No. 6BRIDGES
72	Earth work in excavation of foundation of structures including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material in all types of soil with all lifts and leads complete as per Drawings and Technical Specification Clause 304.
73	Back filling behind abutments, wing walls and return walls with selected granular material of approved quality complete as per Drawing and Technical Specifications Clause 305.
74	Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.
75	Providing & Laying Plain cement concrete of M15 Grade in leveling course below foundation complete as per drawing and Technical Specification Sections 1000, 1500 and 1700.
76	Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100.RCC Grade M35 - Using Batching Plant, Transit Mixer and Concrete Pump
77	Plain/Reinforced Cement Concrete in sub-structure complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100.RCC Grade M35 - Using Batching Plant, Transit Mixer and Concrete Pump
78	Furnishing and Placing RCC/PSC Grade M35 Using Batching Plant, Transit Mixer and Concrete Pump as per drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2300. For solid slab super-structure - Height 5m to 10m.
79	\"Furnishing and Placing RCC Grade M45 Using Batching Plant, Transit Mixer and Concrete Pump as per drawing and MoRTH Specifications Section 1000,1500,1700 & 2300 Forslab over T-beam- Height 5m to 10m.
80	\"Furnishing and Placing RCC Grade M45 Using Batching Plant, Transit Mixer and Concrete Pump as per drawing and Technical Specification 1000,1500,1700 & 2300. For T-beam & slab including launching of precast girders by launching truss upto 40 m span - Height 5m to 10m.
81	Supply, Fitting and Placing coated HYSD bar Reinforcement (Fe 500 D) complete as per Drawing and MoRTH Specifications Section 1000 and 1600
82	For sub-structure
83	For super-structure
84	For foundations
85	Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm ( in traffic direction), covered with a closure plate of 200 mm x 6 mm of weldable structural steel conforming to IS: 2062, asphaltic plug to consist of polymer modified bitumen binder, carefully selected single size aggregate of 12.5 mm nominal size and a heat resistant foam caulking / backer rod, all as per approved Drawings and MoRTH Specifications Section 2600
86	Providing and fixing in position drainage spouts using 100mm dia GI pipe ,complete as per drawings and Technical Specifications Clause 2705.
87	Providing and laying in position 65 mm thick wearing coat consisiting of 40 mm bituminous concrete over a 25mm thick layer of mastic asphalt over deck slab after applying prime coat complete as per drawings and MoRTH Specifications Sections 500 and 2700
88	New Construction
89	Rehabilitation and repair of existing bridges
90	Providing and fixing Tar paper bearing complete as per drawing and Technical Specifications Clause 2011.
91	Sand Filling in Foundation Trenches as per Drawing & MoRTH Specifications Clause 1210
92	Provision of Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all complete as per drawing & Technical Specifications Clauses 809 & 811 and Sections 1000, 1500, 1600, 1700 and 2200.
93	PCC M15 Grade leveling course below approach slab complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1600 and 2700.
94	Reinforced Cement Concrete Grade M30 approach slab including reinforcement and formwork complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1600 and 2700.
95	Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V : 20H towards draining face complete as per Drawing and MoRTH Specifications Clause 2706
96	Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer\"s instructions for installation
97	Supplying,fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder,sealing rings,dust seals,PTFE surface sliding against stainless steel mating surface,complete assembly to be of cast steel/fabricated structural steel,metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400,section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete asper drawing and approved technical specifications.
98	For 200 MT
99	Fixed
100	Free
101	Sliding
102	Cement Concrete Blocks (size 0.5 x 0.5 x 0.5m) Providing and laying of apron with Cement Concrete blocks of size 0.5x0.5x0.5 m cast in-situ and made with nominal mix of M-15 grade Cement Concrete with a minimum cement content of 250 kg/cum as per IRC:21, MoRTH Specifications Clause 2503 and Section 1000 & 1700.
103	Construction of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall MoRTH Specifications Clause 2507.
104	Curtain/Toe wall complete as per drawing and MoRTH Specifications Section 1000,1500,1700 and clause 2507- Cement concrete Grade M20
105	Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and MoRTH Specifications Clause 2504.
106	Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100. RCC Grade M30 - Using Batching Plant, Transit Mixer and Concrete Pump
107	Plain/Reinforced Cement Concrete in sub-structure complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2200. RCC Grade M30 - Height upto 5m - using Batching Plant, Transit Mixer and Concrete Pump
108	Cleaning and removal of vegetation growth from structures, channel and protective works as per directions of the Engineer.
109	Repair of Existing Bridges by Cement Mortar 1:3 Plastering all complete as per MoRTH Specifications Section 1300.
110	Bill No. 7DRAINAGE AND PROTECTIVE WORKS
111	Earthwork in excavation in all types of soil and rock with all lifts and leads complete as per Drawings and Technical Specification Clause 304.
112	Ordinary soil - Mechanical Means - (Depth upto 3 m)
113	Ordinary Rock
114	Hard Rock
115	Construction of open/covered drain complete as per drg.
116	Plain/Reinforced Cement Concrete in drain Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100. PCC Grade M15
117	Providing and laying PCC/RCC M-20 grade for lined drains. including the cost of formwork but excluding the cost of reinforcement complete as per Drawing and MoRTH Specifications Section 1000, 1500 and 1700. RCC Grade M20
118	Providing & fixing in position coated HYSD / TMT Fe 500 D grade bar reinforcement in base, walls and slab of RCC drains complete as per Drawing and MoRTH Specifications Section 1600.
119	Providing and laying 100 mm dia. pipe for weep hole complete as per Drawing and directed by Engineer
120	Retaining Wall
121	Earth work in excavation of foundation of structures including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material in all types of soil with all lifts and leads complete as per Drawings and Technical Specification Clause 304.
122	Ordinary soil - Mechanical Means - (Depth upto 3 m)
123	Ordinary Rock
124	Hard Rock ( blasting prohibited ) - Mechanical Means
125	Back filling behind abutment, wing wall, Retaining wall and return wall complete as per Drawing and MoRTH Specifications Section 300. Granular material
126	Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000,1700 & 2100 PCC Grade M15 (Retaining Wall)
127	Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100. RCC Grade M30 - Using Batching Plant, Transit Mixer and Concrete Pump
128	Supply, Fitting and Placing coated HYSD bar Reinforcement (Fe 500 D) complete as per Drawing and MoRTH Specifications Section 1000,1900 2100 & 2200
129	For sub-structure
130	Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V : 20H towards draining face complete as per Drawing and MoRTH Specifications Clause 2706
131	Bill No. 8 BUS SHELTER
132	Foundation for Wall and Column
133	a) Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100. PCC Grade M15
134	Brick Masonry Work in Cement Mortar 1:4 in Foundation complete excluding Pointing and Plastering, as per Drawing and MoRTH Specifications Section 1300 for 1 step
135	Brick Masonry Work in Cement Mortar 1:4 in Foundation complete excluding Pointing and Plastering, as per Drawing and MoRTH Specifications Section 1300 for 2nd step
136	Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and MoRTH Specifications Section 1300
137	C:C floor for Platform / Precast Interlocking Paver Blocks
138	Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100. PCC Grade M15
139	Providing and laying Anti-skid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
140	Sitting arrangement for Passenger
141	Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and MoRTH Specifications Section 1300
142	Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.With granite stone of area less than 0.50 sqm.
143	Plastering with cement mortar (1:3 ) on brick work in sub-structure as per MoRTH Specifications Section 1300
144	Providing 10 mm thick plaster of Paris above brick wall as per Drawing and directed by Engineer
145	Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. as per Drawing and directed by Engineer
146	Providing and fixing Light Grey Granite Slab 18mm thick as per Clause 11.31of CPWD Specifications, Volume I, 2019
147	Providing and fixing Glass panel 18 mm thick as per Clause 9.6.4.6of CPWD Specifications, Volume I, 2019
148	Providing and fixing Polycarbonate Sheet (16mm thick) as roffing including MS angles and painting as per Drawing and directed by Engineer.
149	Bill No. 9 TRAFFIC SIGNS, MARKINGS AND ROAD APPURTENCES.
150	Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes.as per drawing and Technical specification 803
151	centre line/edge line/ transverse marking and any other markings.
152	Pedestrian crossing
153	Straight Arrows
154	Straight and Left/Right Turn Arrows
155	Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 10 years warranty manufactured as per IRC :67 made of ASTM D 4956-09 Type XI micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over suitable primer and as per approved drawing and clause 801 including lettering symbols etc.
156	90 cm Equilateral triangle (Cautionary Sign Boards)
157	STOP Sign Octagonal
158	60 cm Circular ( Mandatory Sign Boards )
159	\"Advance Direction sign <0.9sq.m Direction and Place Identification Signs upto 0.9 sqm Size Board (Type XI)Providing and fixing of direction and place identification retro-reflectorised sign with 10 years warranty manufactured as per IRC :67 made of ASTM D 4956-09 Type XI micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc\"
160	Advance Direction sign >0.9sq.mDirection and Place Identification Signs with size more than 0.9 sqm size Board (Type XI)Providing and fixing of direction and place identification retro-reflectorised sign with 10 years warranty manufactured as per IRC :67 made of ASTM D 4956-09 Type XI micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on suitably designed GI pipe pole not less than 50mm NB , 2 Nos. confirming to IS 1239, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 mm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.
161	Single Chevron 600x500 Providing and fixing of retro- reflectorised cautionary, mandatory and inforyears warranty manufactured as per IRC :67 made of Type XI micro prismatic grade sheeting vide clause 801.3.4.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade Cement Concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved Drawing and MoRTH Specifications Clause 801 including lettering symbols etc.60cmx 50 cm rectangular (Single chevron etc.)
162	Providing and fixing of retro- reflectorised cautionary, mandatory and inforyears warranty manufactured as per IRC :67 made of Type XI micro prismatic grade sheeting vide clause 801.3.4.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade Cement Concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved Drawing and MoRTH Specifications Clause 801 including lettering symbols etc.60cmx 45 cm rectangular
163	Providing and fixing retro-reflectorised road delineators complete as per Drawing and MoRTH Specifications Clause 805.Object hazard markerProviding and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 10 years warranty manufactured as per IRC :67 made of Type XI micro prismatic grade sheeting vide clause 801.3.4.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade Cement Concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved Drawing and MoRTH Specifications Clause 801 including lettering symbols etc.
164	Providing and fixing Distance Indicator post including painting and printing etc all complete as per Technical Specification Clause 805.
165	i) 200m stone.
166	ii) Reinforced cement concrete M15 grade Kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.5th Kilometre stone ( precast)
167	iii) Reinforces cement concrete M 15 grade Kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etcOrdinary kilometer stone ( precast)
168	Providing RCC M-15 Boundary Stone of standard design as per IRC:25-1957, fixing in CC M-15, including finishing, lettering and painting etc all complete as per Technical Specification Clause 807.
169	Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRTH Specifications Clause 811.3 &IRC 119-2015
170	Providing and fixing reflective road studs (Raised Pavement Marker) of \" category A\" made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per MoRTH Specification Clause 804Road Markers/Road Stud with Lense Reflector :-
171	Convex Glass as per direction of engineer in charge
172	Bill No. 10 HIGHWAY LIGHTING
173	Supply, installation, testing and commissioning of 8 M octagonal pole made of hot dip galvanized GI sheet 70mm top diameter,130mm bottom diameter thickness 3mm base plate dimensions of 225x225x16mm suitable for wind speed as per IS 875 part III single arm bracket 1.0 mt including foundation bolt 4 nos fixed in existing RCC foundation and junction box etc with 3Cx2.5 sqmm CU flexble cable from JB to luminaire complete 8 Meters.
174	Supply, installation, testing and commissioning of 150W LED street light output greater than 115 lumen/W 4000 – 6000 K with IP66 protection LED chip make cree/lumilled/NIchea with power factor greater than .95 at full load internal surge protection upto 8 kV and Aluminium pressure die cast powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than .98. RoHS complaint,duly wired up for use on 230V AC supply Driver compartment should be separately accessible for maintenance(LM 79 & 80 certificates from NABL accredited third party lab to be produced mentioning chip manufacturer)
175	Civil foundation : Casting of shallow RCC foundation for the 8mtr pole with M25grade cement concrete including reinforcement, levelelling course &complete in all respect as per approved drawing and direction of engineer-in -charge.
176	Supply and laying of one number PVC insulated PVC sheathed armored aluminum power cable of 1.1KV grade of the following sizes in the existing RCC/HUME/STONE WARE/GI/DWC pipe as required. 4 core 16 sq.mm
177	Supply and laying of one number PVC insulated PVC sheathed armored aluminum power cable of 1.1KV grade of the following sizes in the existing RCC/HUME/STONE WARE/GI/DWC pipe as required. 3.5 core 50 sq.mm
178	Providing and laying GI strip all sizes in existing trench
179	Supplying, testing, installing and commissioning of 40mm HDPE pipe for underground cable laying
180	Cable Trench : Excavation upto 750mm depth width upto 300mm wide and back filliing with soft soil complete in all respect and as per direction of engineer-in -charge.
181	Supply, erection ofoutdoor type panel complete with accessories and concrete foundation, service cable termination, testing and commissioning in complete:Incomer: 1no 63A TPN MCCB and Outgoings : 6nos of32A TPN MCB withAstronomical Dial timer and contactor 6A MCBs for the timer.
182	Supply, Transportation, Installation, Testing and Commissioning of 63KVA 3 Phase, 50 Hz, Oil type, Outdoor type copper wound Transformer designed and manufactured as per IS 2026-1977 and IS 11171-1985, connected delta on primary side and Star on secondary side with additional neutral brought out on load side, 11000V / (433V / 415V) with LV off load tap changing + 5% to -5% in steps of 2.5%, temporature rise by the resistance 90°C complete with test reports with the following standard mountings.Makes: Kirloskar / PETE / Esennar /Voltamp / Crompton / ABB / Schneider.
183	Double Pole Structure :Supply and erection of 12mts RS joist poles with 200A AB switch, HG fuse set, Lightning arrestor with LT distribution boxincluding erection of 63KVA DTR, fencing, earthing, etc.. complete structure with out line work at load point, including all other minor and total material required, loosening from different sections., including releasing of service etc..complete for finished item of work
184	Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required..
185	Supply, Installation, testing and commissioning of 16M highmast shaft in single section suitable for wind speed as per IS 875 Part-3, with raising lowering system comprising, head frame, luminaries carriage suitable to install 6 nos luminaries in symmetrical arrangement, double drum winch, 5mm diameter SS wire rope ,trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. (Wiring material, power cables between panel and mast, MCB in base compartment are not included.)
186	Supply and fixing 24mm diameter (6 numbers) foundation bolts of 750mm bolt length, 445mm pitch circle diameter manufactured from special steel along with nuts, washers, anchor plate and common template.( suitable for 16 Mhighmast system)
187	Supply, Installation, testing and commissioning of 150W LED Flood light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
188	Civil foundation : Casting of shallow RCC foundation for the 16mtr pole with M25grade cement concrete including reinforcement, levelelling course &complete in all respect as per approved drawing and direction of engineer-in -charge.
189	Supply, Installation, testing and commissioning of Control panel for Highmast (should be supplied same High Mast Manufacturer) including all wiring of luminaire and control wiring.
190	Bill No. 11 ENCASING OF WATER PIPE LINE
191	Earthwork in excavation of foundation for structures including pipe culverts in all types of soil including all lead & lifts complete as per Drawings and MoRTH Specifications Clauses 304 & 2903.
192	Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MoRTH Specifications Section 1000, 1500, 1700 & 2100.RCC Grade M25 - With Batching Plant, Transit Mixer and Concrete Pump
193	Supply, Fitting and Placing coated HYSD bar Reinforcement (Fe 500 D) in Foundation complete as per Drawing and MoRTH Specifications Section 1000 and 1600
194	Bill No. 12 GENERAL ITEM
195	Procure (purchase) and supply brand new vehicle for employer and engineer including registration ,full comprehensive insurance(first year), number plate, road taxetc. a} Innova Type 2 Vehicle, complete as per Additional Clause 122 of Part-2, Particular Technical Specifications
196	Vehicles running cost of fuel and POL for 3000 Km as per Additional Clause 122 of Part-2, Particular Technical Specifications
197	Maintenance of Type 2 Vehicles (Provided by Employer) including full comprehensive insurance, Driver\"s salary repairs including replacement of worn tyres, services as per manufacturer’s recommendation etc as per Additional Clause 122 of Part-2, Particular Technical Specifications
198	Bill No. 13SLOPE PROTECTION
199	Excavation in hilly area in ordinary rock not requiring blasting by mechanical means and its disposal at designated area including all machineries, equipments, labours, tools and tackles, lead and lift complete as per construction drawings, as per MoRTH Specifications Clause 301.
200	Supply of fully threaded Nail minimum 25mm diameter that are hot-dip galvanized and having yield strength = 670 MPa, ulimate tensile strength = 800 MPa and minimum galvanization of 500 grams per sqm required for construction of stabilized slope including supply of galvanized nail bearing plates, spherical nuts, coupler as per Additional Technical Specification Clause A-4 and Providing Technical Assistance at site during drilling & Installation activities followed by providing its design, construction drawings amd methods complete as per Additional Technical Specification Clause A-4 and project requirement.
201	Drilling minimum 110mm diameter hole and installation of fully threaded Nail including grouting using cement and non-shrink grout admixtures with all men, machines, lead and lifts as per detailed tender specification and BOQ derived from the approved drawings complete as perproject requirement and Additional Technical Specification Clause A-4.
202	Drilling minimum 90mm diameter hole, Supply and fixing of minimum 70mm diameter semi perforated PVC pipe wrapped with non-woven geotextile as subsurface drainagefollowed by providing its design, construction drawings amd methods complete as per project requirement and Additional Technical Specification Clause A-4.
203	Supply of OPC-43 Grade cement including handling charges etc. as per MoRTH Specification Section 1000.
204	Supply of Admixture to make smooth non shrink grout for anchoring activities including handling charges etc. as per MoRTH Specification Section 1000.
205	Supply and installation of hot-dip galvanized prefabricated welded steel mesh (Mesh) made from hard drawn steel wire having minimum diameter of 8mm and grade B500B or B550C complying with EN10080 or alternatively SAE1010/1018, galvanization shall be done as per IS2629:1985 except the zinc coating which shall be minimum 610 grams per sqm, measured and payable as per actual supplied quantity followed by providing its design, construction drawings amd methods complete as per Additional Technical Specification Clause A-4 and project requirement.
206	Supply and installation of high tensile wire mesh (wire strength = 1770 N/mm²) (HTS Mesh) manufactured in accordance with EN 10223-6, having Zn-Al corrosion protection with class B (150 g/m² coating) according to EN 10244-2, tensile strength greater than equal to 150 kN/m (longitudinal direction) and greater than equal to150 kN/m (transverse direction), minimum resistance of puncture as 154 kN (as per ASTM A975-11), minimum resistance of puncture (when Tested with a deformable soil layer) as 480 kN and minimum shear resistance with spike plate as 240 kN, the spike plates shall have a minimum thickness of 10 mm, a minimum length of 280 mm and a hot dip galvanization according to EN ISO 1461, measured and payable as per actual supplied quantity followed by providing its design, construction drawings amd methods complete as per Additional Technical Specification Clause A-4 and project requirement.
207	Suppy and installation of Green blanket, measured and payable as per actual supplied quantity followed by providing its details, construction drawings amd methods complete as per Additional Technical Specification Clause A-4 and project requirement.
208	Installation of hot-dip galvanized prefabricated welded steel mesh/high tensile wire mesh (wire strength = 1770 N/mm²) and Green Mattress as per Additional Technical Specification Clause A-4.
209	Supply of Barriere (Gully Net) as Debris Flow Barrier as per Additional Technical Specification Clause A-4.
210	Installation of Barriere (Gully Net) as per Additional Technical Specification Clause A-4.
211	Bill 14 - MAINTENANCE DURING CONSTRUCTION
212	Carrying out treatment and repairs to pot holes and any necessary patching to existing bituminous carriageway surfacing as per Technical Specifications Clause 3004.
213	Bill 15 -ENVIRONMENTAL SAFETY, HEALTH SAFETY AND EMP COST
214	Resources allocated to ESHS management
215	ESHSE Manager having 10 years in designing and monitoring the implementation of ESHS management plans for construction works and in Similar works experience for 5 years
216	ESHS Supervisor (one ESHS supervisor for each shift on ach Project Area), total work experience 5 years including 1-year similar work experience
217	Community Liaison Officer having total experience 5 years (Fluency in local Languages should be mandatory for this position)
218	Implementation of health and Safety Plan:
219	Installation silt fencing for control sediment into nearby surface water bodies, including regular maintenance for entire construction period and removal of those fence on completion of work near surface water bodies
220	Provide and maintenance of Personal protective equipment including nosal mask for prohibition of spread of Covid 10, as required, to all Personal Protection Equipment (PPE) pursuant to the practices
221	Medical Check -up – The Contractor shall organises medical check-ups carried out by a doctor or an appropriately qualified nurse for all Contractor’s Personnel prior to the initial mobilisation to the Project Area to check aptitude for the work.Hearing tests are conducted for the contractor’s personnel exposed too noise levels above 80 dB (A) in order to establish initial audiograms. Annual test shall be carried out as per advice of the Engineer: Covid -19 test to the Contractor’s personnel as and when required
222	Provide and maintain first aid provisions on any work site, including : suitably stocked first aid kits: a person, respectively an adequate number of staff appointed and trained to take charge of first – aid arrangements and ensure that staff and workers are informed about first aid arrangements
223	Accommodation, drinking water, meals, and transportation of staff
224	Accommodation, drinking water, meals and transportation of staff, Contractor shall provide to his personnel safe drinking water at all project areas. The quantity and quality of this water complies with the standards of the World health Organisations at supply points.
225	Provided and maintain accommodation for non-resident Personnel in a camp or an alternative structure outside of the Project Areas, such as hotel or rented house
226	Contractor provides meals at a reasonable cost or free of charge to its Contractors Personnel per shift in a canteen area and according to a procurement system
227	Training and Local Requirement management Costs
228	Environmental management training and awareness program
229	Sanitation arrangement at camp
230	Protection of adjacent areas, biodiversity, prevention of erosion and wastewater management
231	Protection of adjacent areas, prevention of erosion and waste water management – The Contractor shall take necessary measures to ensure that pollution to air , water or land is prevented or, where this is not possible, reduced and mitigated as far as practicable during the construction phase. If required in the PA- ESMP the contractor will develop a pollution prevention Plan for managing e.g. atmospheric emissions and dust, e.g noise and vibrations,
232	Installation of Oil interceptor for removal of oil and grease at vehicle wash bay
233	Sprinkling of water for suppression of dust all along the construction areas for the entire Construction period (Dust Suppression = Rs. 10000 per day for 40 days)
234	Traffic, noise and atmospheric emissions management, land take
235	Contractor should carry out or contracting the monitoring the effluent quality pursuant to the present ESHS Specifications by external accredited agency for sampling and Laboratory analysis and submit the analysis results the engineer
236	Contractor should carry out monitoring of environmental attributes of as per environmental monitoring plan for Construction phase (Cost obtained from NABL accredited lab)
237	Air Quality Sample - 8 no
238	Surface Water Sample - 8 no
239	Ground Water Sample - 8 no
240	Noise Quality Sample - 8 no
241	Soil Quality Sample - 8 no
242	Contractor should carry out monitoring of environmental attributes of as per environmental monitoring plan for the period of operational phase / Defect Liability period
243	Air Quality Sample- 4 no
244	Surface Water Sample - 4 no
245	Ground Water Sample - 4 no
246	Noise Quality Sample - 4 no
247	Soil Quality Sample - 4 no
248	Solid Wate /hazardous products management
249	Identifying, collecting transporting, and treating all waste produced on Project areas
250	Vegetation clearing and site rehabilitation
251	Site rehabilitation – the contractor will rehabilitate all Project Areas and landscapes disturbed by the works, to their original condition where possible upon completion of construction and prior to the provisional acceptance of the works. Close collaboration with all statutory stakeholders will be conducted in cooperation with the Employer during the reinstatement. This will include all temporarily acquired sites including borrow areas, camp site, etc.
252	Bill No. 16 Procurement of Network Survey Vehicle (NSV)
253	Purchase and supply brand new Network Survey Vehicle (NSV) for employer with mounted on a new Force Tempo Traveler Vehicle or equivalent supplied to KSTP, including installation, System warranty, technical training etc. complete, including Way link Systems/ARRB Systems/Via-Tech/ ROMDAS/ Fugro or equivalent, complete as per Additional Technical Specification Clause A-6.
254	Vehicles running cost of fuel, POL and other consumables for 3000 Km for NSV toeing vehicle including all expenses required for keeping the vehicles in smooth running condition.
255	Maintenance of NSV Vehicle (provided to Employer) including full comprehensive insurance, Driver\"s salary repairs including replacement of worn tyres, necessary services as per manufacturer’s recommendation etc

Also Visit

Tenders

Kerala Tenders

Construction Tenders

Road Construction Tenders

Road Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Rehabilitation And Up Gradation Of Neyyassery - Thokkumbansaddle Road ( Length Of 29.196 Km ) In Idukki District Rehabilitation And Up Gradation Of Neyyassery - Thokkumbansaddle Road ( Length Of 29.196 Km ) In Idukki District, Idukki-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Rehabilitation And Up Gradation Of Neyyassery - Thokkumbansaddle Road ( Length Of 29.196 Km ) In Idukki District Rehabilitation And Up Gradation Of Neyyassery - Thokkumbansaddle Road ( Length Of 29.196 Km ) In Idukki District, Idukki-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us