Military Engineer Services-MES has published Completion Of Balance Works For Provision Of Certain Sports Facilities At Af Station Devlali Completion Of Balance Works For Provision Of Certain Sports Facilities At Af Station Devlali. Submission Date for this Tender is 30-03-2022. Civil Work Tenders in Nashik Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Mar-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-03-2022 |
| Sl. No. | Item Description |
| 1 | Note: The following items of works of BOQ are left over works of existing work.Tenderer should visit the site before quoting their unit rates.Cost of minor works if any, not included and required to complete the left over works shall be inclusive in quoted unit rate.No claim whatsoever due to improper understanding of the scope of work, quality, quantity of left over items shall be admissible at later stage. |
| 2 | Material & Labour for 100mm thick Ready Mix Concrete M-20 grade using 20mm graded stone aggregate as in hardstanding/ pavement finishing cement concrete surface even and smooth without using extra cement and using vaccum dewatering method and power trowelling method with skim floater complete all as specified and as directed. Note : Maximum undulation for flat top surface of finished concrete shall not exceed 1.5mm. |
| 3 | Material & Labour for forming expansion Joint, 12mm thick, filled with preformed bituminous filler board and top 30mm primed and sealed with sealing compound grade "B"for 100mm thick flooring complete all as specified and as directed. |
| 4 | Material & Labour for forming contraction (dummy) joints 65mm deep x 10mm wide, filled withsealing compound grade "B" complete all as specified and as directed. |
| 5 | Material & Labour for forming construction joint 30mm deep X 10 mm wide, filled with sealing compound Grade "B" complete all as specified and as directed. |
| 6 | Note for Serial Item Nos 1.02 to 1.04 : Joints in concrete during construction shall be cut by machine only to maintain the proper width and finishing to edges. |
| 7 | Material & Labour for all weather synthetic acrylic surface flooring of 3mm thick laid in 8 layers with layers of coarse & fine rubber, sealant coat, acrylic texture coat & acrylic finish coat, for outdoor volleyball courts/ basketballcourts including necessary court marking as per international standards complete all as specified and as directed. Make : Sundek Sports/ Nivia/ Asian flooring India Pvt. Ltd/ Sunflex Sports Surfaces/Rayzon Mumbai/Yinex Meerut or any other manufacturer in the approved list of Sports Authority of India. |
| 8 | Supply & Fixing volleyball posts all as per international shape and size including all fixing arrangement including excavation in post holes, PCC for post holes, etc., complete all as shown on drawings, all as specified and as directed. |
| 9 | Excavation in post holes each not exceeding 0.5 Cu.m all as shown on drawings, getting out in soft / loose soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. |
| 10 | Material & Labour for plain cement concrete 1:3:6 type C-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 11 | Material & Labour for Mild Steel (Plain or chequred) with riveted, bolted or welded attachment (gusset/ base plate) complete all as specified and as directed. |
| 12 | Material & Labour for MS steel work in tubular/ Square/ rectangular trusses, tubular posts and rafters/ purlins including special shaped washers etc. complete using butt welded tubes confirming to IS 1161 grade St 240 complete all as specified and as directed. |
| 13 | Material & Labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 15 | Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed. |
| 16 | Supply & Fixing mild steel angle in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 17 | Supply & Fixing round tie bars 10mm dia conforming to Fe-290 Gde E-165 let in and fixed independently including hooking ends for securing wire mesh chain link fencing as in bearing bars complete all as specified and as directed. |
| 18 | Supply only chain link fencing made out of 3.8 mm to 4 mm dia galvanized MS wire, size of mesh 50 mm x 50 mm complete all as specified and as directed. |
| 19 | Fixing only chain link fencing of wire mesh of any size and dia of wire including line wires and type of standard rails, straining bolt etc including provision of binding wire complete all as specified and as directed. |
| 20 | Supply & Fixing MS screw bolts (machine made) with hexagonal or square heads at one end and screwed at the other, each screwed end to be fixed with one washer and one hexagonal nut, the other end to be embedded in RCC fencing post while casting for fixing chain link fencing, dia of bolt 12mm and length of bolt exceeding 5cm but not exceeding 10cm long complete all as specified and as directed. |
| 21 | Material & Labour for preparation of new steel surfaces of any description not exceeding 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 22 | Material & Labour for line marking for football ground on natural grass turf with professional white line marking concentrate paint (strong adhesion and high durability) with line marking spray marker & transfer wheel machine as per international foot ball ground dimensions & standards complete all as specified and as directed. |
| 23 | Supply & Fixing football goal post of powder coated MS pipe 100mm dia & nylon net all as per international shape and size including all fixing arrangement i.e. Excavation post hole, PCC for post hole etc. or on wheels complete all as specified and as directed and as shown in drawings. |
| 24 | Material & Labour for line marking for hockey ground on natural grass turf with professional white line marking concentrate paint (strong adhesion and high durability) with line marking spray marker & transfer wheel machine as per international hockey ground dimensions & standards complete all as specified and as directed. |
| 25 | Supply & Fixing goal post for hockey ground of MS pipe 75mm dia as per international standards all as shown on drawings complete all as specified and as directed. Note:- Specifications of net shall be referred from particular specifications. |
| 26 | Supply & Fixing Basketball Goal Post all as per international shape and size including all fixing arrangements all as shown on drawings and including excavation of post holes, PCC for post holes etc or on wheels complete all as specified and as directed. |
| 27 | Supply and Fixing 4 Nos of flag on four corners made of iron tube with steel pegs with springs as per standard hockey field complete all as specified and as directed. |
| 28 | RECTIFICATION OF DEFECTIVE WORK |
| 29 | Material & Labour for rectification of undulated portion of existing PCC surface using PCC 1:2:4 type B0, average thickness 25 to 30mm including proper cutting of undulated surface in regular shape, sweeping, cleaning etc complete all as specified and as directed.Note:- Payment shall be made for net repaired area portion. |
| 30 | Material and Labour for cable route indicator fabricated from 40 x 40 x 6mm angle iron 450mm long, riveted or welded with 100mm dia CI or MS round disc duly engraved "LT Cable" in letters including grouted in ground with PCC 1:4:8 type D2, complete all as specified and as directed. |
| 31 | Material and Labour for drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 25mm, complete all as specified and as directed. |
| 32 | Material and Labour for straight plain ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of 25mm dia bore, complete all as specified and as directed. |
| 33 | Material and Labour for construction of valve pit chamber of size 600mm x 600mm x 600mm internal dimensions complete of brick masonry of 230mm thick in cement mortar 1:6 on PCC 1:4:8 foundation 75mm thick using 40mm graded stone aggregate, coping in concrete 1:3:6 for 10cm thick at the top of brick wall using 20mm graded stone aggregate and 10mm thick plastering in cement mortar 1:4 on exposed MS cover of 3.15mm thickness including 40mm x 40mm x 6mm angle iron frame fixed with the same size of angle iron hold fast, handle with locking arrangement with two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and two coats of white wash on the plastered / concrete surfaces, complete all as specified and as directed. Note:- The quoted rate is deemed to be included the rate of necessary excavation in any type of soil, returning and filling in & removing of debris or surplus material from site. |
| 34 | Note: The amount against Schedule of Credit on Page No. 29 shall be deducted from the total amount quoted against Schedule "A" while deriving the Contract Sum for Acceptance as mentioned on Grand Summary. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
