Construction Of Chowki Rearing Centre (Sericulture) At Garli, Teh. Pragpur, Distt. Kangra (Hp). Construction Of Chowki Rearing Centre (Sericulture) At Garli, Teh. Pragpur, Distt. Kangra (Hp).
Tender Value
18.43 Lakhs
Estimated cost
Bid Submission
14 Mar 2022
0 days left
EMD
35100
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pragpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Chowki Rearing Centre (Sericulture) At Garli, Teh. Pragpur, Distt. Kangra (Hp). Construction Of Chowki Rearing Centre (Sericulture) At Garli, Teh. Pragpur, Distt. Kangra (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work and disposal of excavated earth in all leads in all kind of soils, rocks, hard rocks, soft rocks,including dressing the surface complete in all respect. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 2 | Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer-in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor)including payment of MC/ local body dumping charges it lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/ removed as per the direction of Engineer-in-charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. |
| 3 | Providing and laying cement conrete 1:4:8(1cement: 4sand: 8graded stone aggregate 40mm nominal size)and curring complete exculding cost of form work in foundation and plinthincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 4 | Random rubble masonary/polygonal rubble masonary un-coursed/brought courses with hard stone of approved quallity in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement:6sand: 12graded stone aggregate 20mm nominal size)at plinth level in cement mortar 1:6(1cement:6sand)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. |
| 5 | Form work:-Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty intofive millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in situ-reinforced concrete and plain concrete work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (a)Foundation, footings bases of columns etc. and mass concrete. |
| 6 | (b) Columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in Super-structure for all floor level in all heights. |
| 7 | © Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintelsup to any depthin Super-structure for all floor level in all heights. |
| 8 | (d) Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto any thickness in Super-structure for all floor level in all heights. |
| 9 | e) For edges of slab. |
| 10 | f) Vertical wall surfaces such as wall any thickness. |
| 11 | Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all hight. a) Foundation footing bases of columns etc. and mass concrete. |
| 12 | b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain. |
| 13 | © Suspended floors,roors,landings,shelves and their supports balconies.beams,girders,bressumers and cantillever upto floor two level. |
| 14 | Providing Tor steel reinforcement including cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position including cost of binding wire completein Super-structure for all floor level in all heights,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 15 | Boulder filling under floorsincluding carriage of material through all modes of transporationwithin all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge |
| 16 | Brick work using common burnt clay building bricksin super structure for all floors in all heights usingsecond class bricks in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material through all modes of transporationwithin all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge |
| 17 | Providing brick bandincluding carriage of material through all modes of transporationwithin all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge |
| 18 | Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm, MS flat 30x5mm as per drawing and design ,thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primerafter preteatment of the surface including carriage of material through all modes of transporationwithin all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge |
| 19 | Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of material through all modes of transporationwithin all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge . Plain grill. |
| 20 | Providing and fixing panelled,glazed or panelled and glazed shutters for doors windows and clerestory windows including brignt finished/balck enamelled iron butt hinges with necessary screws including carriage of material through all modes of transporationwithin all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge . 35 mm thick.Ist class Deodar wood. |
| 21 | Providing / fixing wire gauge shutters using galvinsed MS wire gauge of I.S. designation 85G with wire of dia of 0.56mm for door ,windows & clerstory windows includingbright finished /black enamelled iron hinges with necessary screws. 30mm thick 1st class Deodar wood. |
| 22 | Providing and fixing, Aluminium sliding door boltwith bolts and nutsscrews etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a)250 x 16 mm (Two hundred fifty into sixteen millimeter) |
| 23 | Providing and fixing, Aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a) 200x 10 mm (Two hundred into ten millimeter) |
| 24 | (b) 150 x 10 mm (one hundred fifty into ten millimeter) |
| 25 | Providing and fixing aluminium handles anodized to required colour or shade with necessary screws etc.complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a)150mm |
| 26 | Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion,screws etc.to suit shutter thickness complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 27 | Providing and fixinghydroulic door closer for doors. aproved quality and manufacture with necessary screw etc complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 28 | Providing and fixing M.S.Hooks and eyes aproved quality and manufacture with necessary screw etc complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.150mm |
| 29 | 6mm cement plaster to ceiling in cement mortar 1:4 (1cement:4sand). including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge |
| 30 | 15 mm cement plaster in single coat on the rough side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 31 | 15 mm (Fifteen millimeter) cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm (Eighty millimeter) in girth and finished even and smooth. Cement mortar 1:6 (One cement : six sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 32 | Steel work welded in built, up saction in trusses and framed work including cutting hosting fixed in position & applying a priming coat of red lead paint in :(a) In grating framed guard, bars ladders, railing, brackets and similar works. |
| 33 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.. |
| 34 | Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cementincluding carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.. |
| 35 | White glazed tiles (Digital) 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry.including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 36 | Kota stone slab flooring (60x60 cm) 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete. 25 mm thick. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 37 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand pepered smooth to give final matter finish to the surface complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 38 | Distempering (Two coats) with Ist quality oil bound washable distemper ofapproved shade and manufacture on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 39 | Finishing wall withweather proof exterior grade emulsion of approved design (Apexultima) or its equaeliet on under corted wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete. |
| 40 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete.150mm diaincluding carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge |
| 41 | Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipe of working pressure including filling the joints with approved adhesive complete.150mm dia PVC plain bend. |
| 42 | Providing under layer for plinth protection of 75 mm (Seventy five millimeter) thick (unconsolidated) bed dry brick/stone aggregated 40 mm (Forty millimeter)nominal size with rammed and consolidated and grouted with fine sand including preparation of ground, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge and 50 mm (Fifty millimetre) thick in cement concrete 1:3:6 (One cement : three sand : six gradedcrushedstone aggregate 20mm (Twenty millimetre) nominal size including finishing the top surfaces of concrete smooth as per HP. PWD. Specifications of 1990 Volume-I, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 43 | Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paitn to give an even shade including cleaning the surfaceof dirt, dust and other foreign matter sand papering and stoppingas per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. with ready mixed paint other than White paint. |
| 44 | Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knottingReady mixed pain brushing red oxide/zink oxide chrome as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plantthrough all modes of transportion within all leads and liftsand as per direction of Engineer-in- Charge. |
| 45 | Providing and fixing 0.60 mm (Zero point sixty millimeter) thick prepainted steel sheet of in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm (Six millimeter) diametre with prepainted limpet and rubber washers complete with all accessories, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 46 | Providing and fixing ridges or hips 60cm (Sixty centimeter) over all with 0.45 mm (Zero point furty five millimeter) thick prepainted steel sheets of in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating+ back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted, bolts & nuts 6 mm dia (Six millimeter diameter) & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. |
| 47 | P/L heavy duty precast cement conc. Interlock ing paver block vibro compected 80mm thick iner locking paver block and Technical specification Clause-1504 , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 48 | Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium grade)15 mm nominal bore.tube fitting and clamps including making good the wall, ceiling and floor, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 49 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.110mm x 90mm. |
| 50 | Providing and fixing vitreous China wash down,water closet(European type. W.C. pan)with integral \"P\" or \"S\" trap including jointing the trap with soil pipe in cement mortar 1:1(One cement : one sand) (Seat and over to bemeasured and paid for separately) Angle Indian Universal closet as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 51 | Providing and fixing 10.00/12.50/15.00 ltrs PVC low level flushing cistern with apair of CI or mild steel brackets complete with fittingsincluding carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 52 | Providing and fixing GI inlet connection for flush pipe with WC pan.including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 53 | Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:1 SOLID TYPE Black plastic seat and cover, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 54 | Providing and fixing jet spray for WC seatof approved quality with all complete fitting , including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 55 | Providing and fixing vitreous china wash basin No. 10001 with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:- Flat back 630mm x 450 mm (Five hundred fifty millimeter into four hundred millimeter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 56 | Providing and fixing vitreous China squatting plate pattern urinal of size 450mmx350mm with integral longitudinal flush pipe.including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 57 | Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P.waste with C.I.or M.S. brackets painted white i/c cutting hole and making good the same excluding fittings size 610x410x200mm.including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 58 | Providing & fiixng CP brass waste for wash basin or sink 32mm dia. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 59 | Providing and fixing PVC waste pipe for wash basin or sink 32 mm dia.including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 60 | Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap.including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 61 | Providing and fixing 600 mm x 450 mm (Six hundred millimeter into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6 mm (Six millimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 62 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws and washers. 600 mm x 20 mm (Six hundred millimeter into twenty millimeter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 63 | Providing and fixingC.P. Brass bib tap (heavy duty ISI marked IS:8931 & 8934) with capastan head. 15 mm dia (Fifteen millimeter diameter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 64 | Providing and fixing C.P. Brass pillar tap with Capstan head (heavy duty ISI marked IS:8931 & 8934) 15 mm dia (Fifteen millimeter diameter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 65 | Providing & fixing CP stop cocksincluding carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.15mm dia. |
| 66 | Providing and fixing P.V.C. connection with brass unions:- 300/450 mm (Three hundred/four hundred fifty millimeter) length (heavy duty ISI marked IS:8931 & 8934) 15 mm (Fifteen millimeter) nominal bore, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 67 | Providing and fixing brass full way valve with wheel 15mm nominal size. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 68 | Providing and fixing GI or MI union 15 mm nominal size. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 69 | (b)20mm nominal size |
| 70 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 71 | Providing and fixing PVC water storage tank ofvarious capacity ISI: 12701 marked, G.I. inlet and outlet connection, 15 mm (Fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.500 ltrs. Capacity with all necessary fittings. |
| 72 | Providing and laying of RCC pipe NP-3 on first class bedding of granular material in a single row i/c fixing collar with CC 1:2 and including jointing and testing complete in all respect. 900mm dia. |
| 73 | Constructing manhole with R.C.C. top slab in 1:2:4 mix (One cement: two sand : four graded stone aggregate 20 mm (Twenty millimeter) nominal size), foundation concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40 mm (Forty millimeter) nominal size), inside plastering 15mm (Fifteen millimeter) thick with cement mortar 1 : 3 ( One cement : three sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement : two sand : four graded stone aggregate 20mm (Twenty millimeter) nominal size) finished smooth complete including curing and testing including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. Inside size 800 mm x 800 mm and 500 mm deep including precast RCC cover with frame (Lightduty single seal Pattern-1) 450 mm x 610 mm (Four hundred fiftymillimeter into six hundred ten millimeter) internal dimensionsnot less than 38 Kg.(weight of cover 23 Kg and weight of frame 15 Kg.). With 230 mm (Two hundred thirty millimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (One cement : three sand) |
| 74 | Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous Chinaincluding carriage of material within all leads and lifts. |
AI Tender Summary
Tender Timeline
Mar 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender