Construction And Repair Of Bt Road Various Place In Ward No. 01 To 35 Taranagar
Tender Value
25 Lakhs
Estimated cost
Bid Submission
16 Mar 2022
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
taranagar → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Repair Of Bt Road Various Place In Ward No. 01 To 35 Taranagar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation for roadway, including trimming bottom and side slopes inccordance with requirement of line, grades and crosssections, including disposal of surplus material with all lift and leadupto 1000 metre as per MoRT&H specification clause 301n all type of soil |
| 2 | Construction of embankment with approved material obtained fromborrow pit with all lifts and leads, transporting to site, spreading,grading to required slope and compacting by vibratory roller 8-10tonne to meet requirement of table 300-2 including cost ofcompensation for earth taken from private land complete as perMoRT&H specification clause 305. (Lead taken upto 5 km) |
| 3 | Providing, laying, spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site,preading in uniformlayers with motor grader on prepared surface and compacting withvibratory power roller to achieve the desired density, complete asper MoRT&H specification clause - 401 including all material, labour,machinery, lighting, guarding and aintenance of diversion. |
| 4 | Providing laying, spreading and compacting stone aggregates of specific sizes as per Table 400-7 to Water Bound Macadamspecification including spreading in uniform thickness; hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of screening (Table 400-8) binding materials to fill up the terstices of coarse aggregates, watering (with water browser) and compacting to required density, making necessary earthen bund torotect edges as per clause 404 of MoRT&H specification including all material, labour, machinery, lighting, guarding andaintenance of diversion Crusher broken - Grade-II (63-45mm) |
| 5 | Providing laying, spreading and compacting stone aggregates of specific sizes as per Table 400-7 to Water Bound Macadamspecification including spreading in uniform thickness; hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of screening (Table 400-8) binding materials to fill up the terstices of coarse aggregates, watering (with water browser) and compacting to required density, making necessary earthen bund torotect edges as per clause 404 of MoRT&H specification including all material, labour, machinery, lighting, guarding andaintenance of diversion Crusher broken - Grade-II (53-22.4mm) |
| 6 | Filling of Pot- holes and patch repairs with Built up Spray Grout in two layers with 53-22.4mm size of aggregate upto 75mm depth andremoval of all f ailed material, trimming of completed excavation toprovide firm vertical faces, cleaning of surface, painting of tack coaton the sides and base of excavation as per clause 503, back fillingthe pot holes with hot bituminous material as per clause 506,compacting with 8-10 tonne power roller, trimming and finishing thesurface to form a smooth continuous surface complete usingBitumen VG-grade 30 as per clause 503, 506 & 3004.2 of MoRT&Hspecification including all material, labour, machinery, lighting,guarding and maintenance of diversion. |
| 7 | Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS : 8887 and approvedquality @ 0.6 kg/sqm with the help of spray set fitted on bitumenContainer (boiler) after cleaning the surface including removing ofbinding material and other foreign matter with wire brushes andsmall picks, sweeping with brooms or soft brushes and finallydusting with old gunny bags and compressed air to receivebituminous treatment complete as per clause 502 of MoRT&Hspecification including all material, labour, machinery, lighting,guarding and maintenance of diversion. |
| 8 | Providing and applying tack coat on the prepared surface withbitumen emulsion as per IS: 8887 and approved quality @ 0.2kg/sqm with the help of spray set fitted on bitumen Container (boiler)after cleaning the surface with brooms or soft brushes and finallydusting with old gunny bags and compressed air to receivebituminous treatment complete as per clause 502 of MoRT&Hspecification including all material, labour, machinery, lighting,guarding and maintenance of diversion. |
| 9 | Scarifying existing granular road surface, including picking up scarified material and stacking of old serviceable material within alead of 1000 meters complete as per clause 305.4.3 of MoRT&Hspecification including all labour, machinery, lighting, guarding andmaintenance of diversion. |
| 10 | Providing and laying bituminous macadam in 50/75 mm compactedthickness on prepared surface with specified graded crushed stoneaggregates as per Table 500-4, Grading-II for base/ binding course,loading of aggregate with F.E. loader, heating and mixing of stoneaggregate and bitumen in computerised hot mix plant, transported tosite by tippers to paver, laid over a previously prepared surface withpaver finisher fitted with electronic sensing device to the requiredgrade, level and alignment and rolling with power roller and vibratorycompactor as per clauses 501.6 and 501.7 to achieve the desiredcompaction complete as per clause 504 of MoRT&H specificationand including all material, labour, machinery, lighting, guarding andmaintenance of diversion but excluding cost of primer/ tack coat. |
| 11 | Providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per Table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including cost of anti-stripping compound wherever required), including loading of material with F.E. loader, hot mixing ofstone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of MoRT&H specification including all material, labour, machinery, lighting, guarding andaintenance of diversion but excluding cost of tack coat/ seal coat |
| 12 | Providing and laying premixed seal coat using hot mix plant and paver finisher with aggregate of 6.7mm size defined as 100% passing through 11.20mm sieve and retain on 2.36mm sieve with 0.09 cum per 10 sqm premix with bitumen binder @ 4.5% and rolling with power roller 8-10 tonne complete as per clause 513 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 13 | Sss |
AI Tender Summary
Tender Timeline
Mar 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender