|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.a) Group C |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 3 | Fabrication, supplying & fixing of Shutter i/c mechanical devices and new gear box with handle of 1mtr for operational moment of existing rolling shutter of height 3mtr i/c vertical travel of M.S rolling shutter etc complete as reqd. it also include mechanical device for chainnd crank operation (Dismantled material shall be return to the contractor) |
| 4 | Cleaning of existing cable trench of size 0.80 mtr. width0.95 depth by lifting bolders, domestic waste, soil, bricks dabris & garbage etc.(average 16 cables of size 50 sq.mm to 400 sq.mm) of different size without disturbing the connection of cables etc as required |
| 5 | Providing/supplying/filling of Yamuna sand in empty cable trench as reqd. |
| 6 | Dressing of different size LT cable in existing cable trench 50 Sq mm to 400 Sq.mm approximate each cable fixing on the surface of both side, the M.S. clamp already fixed walls with the help of suitable size of MS clamp etc complete as reqd. at site. |
| 7 | Removing the dismantled/detective cables of size 35 sq mm dia to 400 sq. mm from the existing cable trench by men power etc complete as reqd.(Dismantle material shall be return to the contractor) |
| 8 | Providing services for pick up van i/c driver 2 nos beldarfor disposal of cable trench rubbish/malba/similar unserviceable, dismantled of waste materials means, old sand, i/c loading, transporting, unloading of approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 mtr initial lead for all leads i/c all lifts involved. |
| 9 | SITC of energy efficient surface mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95,CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. |
| 10 | Brush/ spray painting of internal/ external hydrant / water pipe line with good quality synthetic enamel paint after cleaning the surface & making good the same for painting etc complete etc as required at site rom NABL accredited Lab. |
| 11 | Providing / fixinghot rolled fiber sheet on existing wire mesh enclosureof minimum 2 mm thickness etc complete as required at site |
| 12 | Fabrication, supplying,& fixing of MS Chequered Plate of 6mm thick (N.S.) MS sheet having support of 40x40x6mm angle iron on the back side of Chequered Plate to rest on the existing base frame on cable trench to close the opening existing sheet including providing and fixing handle and painting etc. as required (as per drawing approved by Engineer-in-charge) i/c credit for old dismantled material. |
