Supply Erection Commissioning Of 02 Nos. Axial Flow Vt Pumps Of 35 Cs. With 2 Nos. 150 Hp Solid Shaft Cage Induction Motors Operated Through Lv Motor Control Center Panel Alongwith Delivery Pipes Bends And Allied Accessories At Rd 306 Jln Feeder And Suppl, jhajjar-Haryana

Supply Erection Commissioning Of 02 Nos. Axial Flow Vt Pumps Of 35 Cs. With 2 Nos. 150 Hp Solid Shaft Cage Induction Motors Operated Through Lv Motor Control Center Panel Alongwith Delivery Pipes Bends And Allied Accessories At Rd 306 Jln Feeder And Supply Erection Commissioning Of 02 Nos. Axial Flow Vt Pumps Of 35 Cs. With 2 Nos. 150 Hp Solid Shaft Cage Induction Motors Operated Through Lv Motor Control Center Panel Alongwith Delivery Pipes Bends And Allied Accessories At Rd 306 Jln Feeder And , Supply Of Axial / Mix Flow Water Lubricated Vt Pumps Of 35 Cs. Discharge At Static Head Of 4.5 Mts Complete In All Respects As Per Approved Technical Specifications In Annexure-A , Supply Of Squirrel Cage Induction Motor Of Capacity 150 Hp, 4 Poles, 1440 Rpm, 3 Phase, 440 / 415 Volt Suitablefor Fitment With 35 Cs. Vt Axial / Mix Flow Pump Type As Per Approved Technical Specifications In Annexure-B , Supply Of 415 Volt, 1250 A, 3 Phase, 50 Hz., Motor Control Centre Lt Panel With Copper Bus Bar, Main Incomer With Fully Automatic Auto Transformer Starters For Operating 2 Nos. 150 Hp Motors Fitted With Suitable Range Of Acb, Mccb, Airbreak Contactors, Micro Controller Based Fault Protecting Devices / Relays, Capacitor Bank With Apfcr Relay, Duty Contactors And Other Allied Accessories Complete In All Respects As Per Approved Technical Specificationin Annexure-C , Supply Of Ms Delivery Pipes Having 7.1 Mm Thickness, 24” Diameter Along With Req. Ms Flanges In Accordance With Is 2062:1989 Grade A With Epoxy From Inside And Painted From Outside With 2 Coats Of Anticorrosive Bituminous Based Paint , Supply Of Syphon Breaker Valve Of 35 Cs. Capacity Pumps As Per Specification , Supply Of Axial Flow Water Lubricated Vertical Turbine Pump Having Discharge 10 Cs.Discharge At Static Head Of 4.5 Mtr With Y Body Alongwith Bend With 3.5 Mtr Column Operating Speed Of 960 Rpm Complete In All Respect As Per Technical Specifications For Already Existing Vt. Motor 50 Hp , Erection & Commissioning2 Nos 35 Cs. V.T Pump With 150 Hp Motors & Panel, Connecting Y Bodyof Pump With Bends , Nipple, Delivery Pipes Through Existing Rcc Wall 4 Feet Thick Requiring Breaking, Drilling Etc. At Site Including Jointing With Rubber Sheets, Fabrication, Alluminium Thimbles, Nut & Bolts, Welding, Punching, Transportation Etc And Fitting Of Syphon Breaker Valves As Per Requirements With Replacement Of Existing Pumps , Erection & Commissioning1 Nos 10 Cs. V.T Pump, Connecting Y Bodyof Pump With Bends , Nipple, Delivery Pipes Through Existing Rcc Wall 4 Feet Thick Requiring Breaking, Drilling Etc. At Site Including Jointing With Rubber Sheets, Fabrication, Alluminium Thimbles, Nut & Bolts, Welding, Punching, Transportation Etc And Fitting Of Syphon Breaker Valves As Per Requirements With Replacement Of Existing Pumps , Providing 30 Feetdeep Complete Double Side Plate Earthing With 2 Earth Pits On Both Sides Of Pump House By Boring & Lowering 1.5 Gi Pipe, Filling Boring With Charcoal, Copper Strips, Salt & Fixing Base Plate, Connecting This Main Earthing Through Copper Strips / Wires Up To Motors & Panel As Per Site Requirement , Providing & Laying Lt Armoured Pvc Copper Cable Of Size 185 Sq. Mm, 3 ½Core Conforming To Is 7098 -1985 As Per Approved Makes , Providing & Laying Lt Armoured Pvc Copper Cable Of Size 70 Sq. Mm, 3 ½Core Conforming To Is 7098 -1985 As Per Approved Makes , Providing & Laying Lt Armoured Pvc Copper Cable Of Size 400 Sq. Mm, 3 ½Core Conforming To Is 7098 -1985 As Per Approved Makes , Supply, Erection & Commssioning Of 415 Volt, 320 Amp, 3 Phase 50 Hz. Motor Control Centre L.T. Panel With Main Incomer And2 No. Outgoing Feeders With Fully Automatic Star / Delta Starter For Operating , 2 No.50Hp Motor Fitted With Suitable Range Acb, Mccb, Airbreakcontactors, Micro Controller Basedfault Protecting Devices / Relaysand Other Allied Accessories Complete In All Respect As Per Approved Technical Specificationsin Annexure-C

INR 15000 /-

INR 316000.0 /-

INR 1.57 Crore /-

Name of Work: Supply, Erection & Commissioning of 02 Nos. Axial flow VT pumps of 35 Cs. with 2 Nos. 150 HP solid shaft cage induction motors operated through LV Motor control center panel alongwith delivery pipes/ bends and allied accessories at RD 306 JLN Feeder & 01 Nos. 415 volt, 320 Amp, 3 phase 50 Hz. Motor Control Centre L.T. Panel at RD 210 JLN Feeder in W.S. Mech. Division, Jhajjar.

Sl. No.	Item Description
1	Supply of Axial/Mix flow water lubricated VT pumps of 35 Cs. Discharge at static head of 4.5 mts Complete in all respects as per approved technical specifications in Annexure-A
2	Supply of squirrel cage induction motor of capacity 150 HP, 4 poles, 1440 rpm, 3 phase, 440/415 volt suitablefor fitment with 35 Cs. VT axial/Mix Flow pump type as per approved technical specifications in Annexure-B
3	Supply of 415 Volt, 1250 A, 3 phase, 50 Hz., motor control Centre LT Panel with copper bus bar, main incomer with fully automatic auto transformer starters For operating 2 Nos. 150 HP motors fitted with suitable range of ACB,MCCB, Airbreak Contactors, micro controller based fault protecting devices/relays, capacitor bank with APFCR relay, duty contactors and other allied accessories complete in all respects as per approved technical specificationin Annexure-C
4	Supply of MS delivery pipes having 7.1 mm thickness, 24” Diameter along with req. MS flanges in accordance with IS 2062:1989 Grade A with epoxy from inside and painted from outside with 2 coats of anticorrosive bituminous based paint
5	Supply of Syphon breaker Valve of 35 Cs. Capacity pumps as per specification
6	Supply of Axial flow water lubricated vertical turbine pump having discharge 10 Cs.discharge at static head of 4.5 mtr with "Y" Body alongwith bend with 3.5 Mtr column operating speed of 960 RPM complete in all respect as per technical specifications for already existing VT. Motor 50 HP
7	Erection & commissioning2 No"s 35 Cs. V.T pump with 150 HP motors & panel, Connecting "Y" bodyof pump with bends , nipple, delivery pipes through existing RCC wall 4 feet thick requiring breaking,drilling etc. at site including jointing with rubber sheets, fabrication, Alluminium Thimbles, Nut & Bolts, welding, Punching, transportation etc and fitting of syphon breaker valves as per requirements with replacement of existing pumps
8	Erection & commissioning1 No"s 10 Cs. V.T pump, Connecting "Y" bodyof pump with bends , nipple, delivery pipes through existing RCC wall 4 feet thick requiring breaking, drilling etc. at site including jointing with rubber sheets, fabrication, Alluminium Thimbles, Nut & Bolts, welding, Punching, transportation etc and fitting of syphon breaker valves as per requirements with replacement of existing pumps
9	Providing 30 feetdeep complete double side plate earthing with 2 earth pits on both sides of pump house by boring & lowering 1.5" GI pipe, filling boring with charcoal, copper strips, salt & fixing base plate, connecting this main earthing through copper strips /wires up to motors & panel as per site requirement
10	Providing & laying LT Armoured PVC copper cable of size 185 sq. mm, 3 ½core conforming to IS 7098 -1985 as per approved makes
11	Providing & laying LT Armoured PVC copper cable of size 70 sq. mm, 3 ½core conforming to IS 7098 -1985 as per approved makes
12	Providing & laying LT Armoured PVC copper cable of size 400 sq. mm, 3 ½core conforming to IS 7098 -1985 as per approved makes
13	Supply, Erection & Commssioning of 415 volt, 320 Amp,3 phase 50 Hz. Motor Control Centre L.T. Panel with main incomer and2 No. outgoing feeders with fully Automatic Star/Delta Starter for operating , 2 No.50HP motor fitted with suitable range ACB, MCCB, AirbreakContactors, micro controller basedfault protecting devices/relaysand other allied accessories complete in all respect as per approved technical specificationsin Annexure-C