|
| 1 | Supplying, installation, testing & commissioning of inverter type cassette AC unit 2TR, 6000Kcal/hr capacity, not less than 4/5 star rating complete with outdoor condensing unit & ceiling mounted evaporating unit having cordless remote control with angle iron rod, clamp & fresher type hook for supporting of indoor unit, capable of cooling, filtering & dehumidifying suitable for operation as 230V single phase AC supply complete with copper refrigeration pipe upto 10 mtrs. and suitable length of drain pipe with outdoor unit stand etc. as reqd. |
| 2 | Supplying, installation, testing and commissioning of 5 KVA, copper wounded, wall mounted voltage stabilizer with LED display, surge indicator, automatic reset suitable for 1.5/2.0 TR AC unit complete etc. as required. |
| 3 | Providing and fixing of M.S. outdoor, floor/ wall mounting powder coated stand suitable for 2.0 Ton capacity cassette type AC outdoor unit complete as reqd. |
| 4 | Providing & laying of refrigerant copper piping of size (5/8” & 1/4” dia) with nylon/foam type insullation, clamp and accessories from indoor unit to outdoor unit of split type AC dully complete as reqd. |
| 5 | Providing & fixing of PVC drain pipe of size 25 mm dia medium gauge drain pipe with necessary fitting such as nipple, reducer, clamp on surface / recess i/c cutting the wall and making good the same complete as reqd. |
| 6 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 7 | Supplying, installation, testing & commissioning of energy efficient recessed mounted type 34W to 36W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size)suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with thehelp of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The total system wattage not more than of 34W to 36W, LED lumen should be = 3600 system efficacy of = 110 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>80, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison. |
| 8 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.(a) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 9 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
