Strengthening Work Of Krishi Bhawan, Ranchi For The Year 2021-2022
Tender Value
99.25 Lakhs
Estimated cost
Bid Submission
14 Mar 2022
0 days left
EMD
1.98 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Strengthening Work Of Krishi Bhawan, Ranchi For The Year 2021-2022
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 2 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 3 | Dismantling lime terracing upto average 115mm depth with chisel and hammer including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 4 | Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 5 | Taking down chowkhat in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 6 | Providing fixing pressed steel door frame conferming to IS:4351 manufactured from commercial mild steel sheet of 1.25mm thickness including hinges,jamb,lock jamb,bead and if required angle threshold of mild steel angle section 50x25mm or base tiles of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards,lock strike plate and shock absorbers as specified and applying a coat of approvedsteel primer after pre-treatment of the surface as direction of E/I. Profile-B |
| 7 | Providing and fixing2nd class teak wooden molding beading to door and window frames with iron screws,plugs and priming coat on unexposed surface etc complete.(50x20mm) |
| 8 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. |
| 9 | Providin and fixing existing door frames 30mm thick factory made PVC door shutter made of style and rails of a UPSC hollow section of size 60mmx30mm and wall thickness 2mm+0.2mm with in built decorative moulding edging on one side.The styles and rails mitred and joined at the conrers by means of M.S.galvanised/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws the lock size 52x20mm and1mm+0.1mm wall thickness.The lock rail made of of ‘H’ section,a UPVC hollow section of size 100x30mm and23mm+0.2mm wall thickness fixed to the shutter frame filled with a UPVC multi chambered single panel of size not less than 620mm,having over all thickness of 20mm and1mm+0.1mm wall thickness.The panels filled vertically and tia bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-chage. |
| 10 | Providing and fixing factory made PVC door frame of size 50x46mm with a wall lthickness of 5mm,mmade out of extruded 5mm rigid PVC foam sheet mitred at corners and join ed with 2nos of 150-mm lolng brackets of 15x15mm M.S.square tube,the bvertical door profiles to be reinforced with 19x19mmM.S.square tube of 19 guage EPDM rubber gasket weather seal to be provided through out the frame.The door frame to be fixed to the wall using M.S.screws of 65/100mm size complete as per manufacturers specification and direction of E/I. |
| 11 | Dismantling damaged Tiles including all complete job as per direction of E/I. |
| 12 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. |
| 13 | With commercial grade white 15 x 15 cm tiles. |
| 14 | Providing and layingrectifiedglazed ceramic wall tiles300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as white,Ivory,Grey,Fume,Red Brown ,laid on 20mm thick bed ofcement mortar 1:4(1cement:4 coarse sand) jointingwith grey cement slurry @ 3.3kg/sqm including pointing the joints withwhite cement and matching pigments etc., complete |
| 15 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 16 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 17 | Providing and laying Double chargevitrified floor tiles in ,different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing with grey cement slurry@ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc.complete.size of tiles 600x600mm |
| 18 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare thesurface even and smooth complete. E/I. |
| 19 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l. |
| 20 | Providing two coats of oil bound distemper of approved shade and make over old surface including washing, cleaning and papering the walls, scaffolding, washing of floors and taxes, all complete as per building specification and direction of E/l. |
| 21 | Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I. |
| 22 | Reinforced cement concrete work in beams,suspended floors,roofs having slope up to15 landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircase and spiral stair case above plinth level up to floor five level,excluding the cost of centering,shuttering,finishing and reinforcement,with 1:1.5:3(1cement:1.5coarse sand(zone III):3 grade stone aggregate 20mm nominal size) |
| 23 | water proofing for old and new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials appled with brush,rooler or spray for water proofing coating as per manufacturer specification with following ites. (a) surface preparation-providingand cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laidtrance by clelaning with compressedair & waterjet including all materials,labour,tools complete .Pending test to be doneafter plugging alloutlets and to be chockedfrom solift to identiify secapagae,-do-admixture of sika India Pvt Ltd/Myk schomberg/Dr.Fixt/-do-(b) Ist coat -Applying Ist coat of two component acrrylic modified ready to use,flexible component materials on surface saturated dry roof and side wall of parapet wall upto 600mm by brush or roller after Ist coatof application.45garm of Fibre glass cloth to lay when the first layer is still green Ist coat shouyld be applied @ 1.5kg/sqm/coat for the purpose of measurment the entire treataed surface will be measured(c) 2nd coat-to apply the 2nd coat of two component acrylic modifiedready touse,flexible cementious materials right angle to theIst coat over the glass fibre laid surface,2nd coat shoud be applied @ 0.7kg/sqm/coat For the purpose of measurment the entire trealled surface will be measured After three days of drying the 2 nd coat,the rain water outlots to be plugged and ponding test to be done for 48 hours to dentify seepageleakaage from solift and if found necessaory rectification to be done as perof E/C The water proof coating to be protected from damage before screed over it wataerproofing Brand sika Topseal /Foaroc Brush band RFX/Dr.Fixit pidiffin 2K/MYk Aquain TG. Product performance/chemical Base part Aacrylic copolmet ,part B specially graded cementitious pwoder/Density 1.6kg(mixed density) at +27°C/tensila strength 2N/mm2 after 25 days (with Fibre cloth)(According to ASTM D23770) pulout Bond strength 2N/mm2(Concrete failure)(According to ISO4624) slant snear Bond strength -4N/mm2(Accoording to FIP 5.15)(d) pratectionof treated surface with P.C.c-The treated surface should be covered with25mm/50gam PCC of M20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlets in alltrnatepanels of 2mtx2mt keeping 6mm gap between the panel joint-integral water proofingadmixture conforming to IS 26462of 100ml per bag of of cement to be added inthe scraed concretepaid separtely for this items deep and big fent.All corners shall be chaainfeted with150mmx150mm fillete.The rinfowater outlietsof water the peripheral graps betwen PVC pipe outlet and concrete surface should be packed properly with rich concrete and the peeripheral mouth to be sealed with moisture insansitivie epoxy putty of sika India Pvt Ltd/(MYK schormbarg/Dr Fixit/Fosroc for the purpose of measurment the entire treated surface will be measured(e) Groove of PCC surface should be filled with polysulphide sealant paid separataly.Brand sika India Pvt Ltd/MYK schomberg/Dr Fixit/Fosioc. |
| 24 | covering of trreated surface with P.C,C.Providng 25mm thick cemet concrete M20(1:1.5:3)maintaing slope in alternate 2mtx2mt panels with approved quality of stone chips of 20mm to 6mm sizie graded and cleaned sand of F.M 2.5 to3 includig screening,shuttering and mixing cement concretein mixer with admixture of integral water proffing and placing in position,skirting curing,taxes and royalty all complete as per buidings specification and direction of e/I.panels that has been left should be casted next day.there should be 6mm gap between panels Brand sika plastocrate plus,MYK proof WP 10,FOSROC CONPLASTX421 ICX dR.fIXIT PIDIPROOF lW+-do-all complete job(old surface) |
| 25 | Providingand filling of 6mm thick Groove beetween 25mmPCC panels with polyesulphide sealant (poring Grada) as per drawing and technical specification and direction of E/I with 18% GST) Brand sika polysulphaidefoasroo thioles Cood Dr.Fixit pidiseal PS(42P)MYK seal PS or Etrivlent. |
| 26 | Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt, rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 27 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyesster powder coating50 micron) |
| 28 | Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm) |
| 29 | Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt) |
| 30 | Providing two coats of synthetic enamel paint over a coat of red oxidized paintof approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.E/l. |
| 31 | Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l. |
| 32 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l. |
| 33 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direcition of E/l. |
| 34 | Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm.Cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l. |
| 35 | Making plinth protection 50mm thick of cement concrete 1:3:6(1cement:3 coarse sand(zone-iii):6graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size ,well rammed and consolidated and grouted with fine sand,including necessary excavation,levelling &dressing &finishing the top smooth. |
| 36 | Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation andrefilling all complete as per specification and direction of E/l. |
| 37 | Providing tor steel reinforcement of 8mm. dia. rods as per approved . design and drawing with cutting ,bending and binding with annealed wire with cost of wire removal of rust,placingthe rods in position(excluding carriage of bars to work site) all complete as per building specification and direction of E/I(TMT Fe 500)(only valid for Tata(Tiscon),SAIL,JSPL,Electrosteel steels Ltd Bokaro and Vizag(RINL) |
| 38 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l. |
| 39 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., \"p\" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. |
| 40 | (a) 580mm longwith 10.0 lit. low level P.V.C. cistern |
| 41 | Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with \"p\" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. |
| 42 | (b)10/12.5lit. low level P.V.C. cistern |
| 43 | Supplying, fitting and fixing viterous white glazed earthen ware indian squating type 600 x 350 mm urinal plate of Parry Hindustan or any other I.S.S. approved make with internal flushing rim 100 mm white glazed earthen ware channel about 1m long 5litre capacity C.I. automatic flushing cistern of reliance or any other approved make with fittings C.I. or R.S. brackets 15 mm & 45 cm long P.V.C. alkathene pipe standard G.I. flush pipe for back and front with spreader fitting and brass coupling etc. 15mm C.I. body brass spindle stop cock weight not less than 450 grms. all complete including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l. |
| 44 | (A) 600 mm x 350 mm size ( large ) |
| 45 | S/F/F VIP Bath room fitting including all complete job as per direction of E/I. |
| 46 | Bib cock (Long tahread) |
| 47 | Angular stop cock |
| 48 | Mirror of 6mm thick 600x450mm |
| 49 | pillar cock long neck |
| 50 | Glass shelf 22\" |
| 51 | soap dish |
| 52 | Towel Rail 24\" |
| 53 | 100 mm dia steel Jali |
| 54 | Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.conceled |
| 55 | 20mm nominal bore |
| 56 | 25mm nominal outer dia pipes |
| 57 | Providing and fixing Chlorinated polyvinyl chloride (PVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings..This included jointing of the pipes & fittings with one step CPVC solvent cement trencing,refilling & testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(External work) |
| 58 | 25mm dia |
| 59 | 32mm dia |
| 60 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes. |
| 61 | 110mm diameter |
| 62 | 75mm dia |
| 63 | Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticisedRigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion. |
| 64 | Tee 110mm dia |
| 65 | Band110 mm dia |
| 66 | Coupler 110mm dia |
| 67 | clip 110mm dia |
| 68 | Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitablelocking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported fortank. |
| 69 | Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I. |
| 70 | sand lead 8K.M. |
| 71 | chips lead 22K.M. |
| 72 | Brick lead 8K.M(1K+7P) |
| 73 | Stone Metal 20 km lead |
| 74 | Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessedPVC conduct with Modular typeswitchmodular plate, Suitable size G.I Box etc. as required. |
| 75 | group C |
| 76 | Wiring for light / Power plug with 2×4 sq mm FRPVC ininsulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthingas required . |
| 77 | S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box includingconnections but excluding modular plaate etc as reqd. |
| 78 | 5/6 Amps 3pin 5/6 Amp socket |
| 79 | Wiring for circuit/submain wiring along withwiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. |
| 80 | 2x1.5sqmm+1x1.5sqmm earth wire |
| 81 | 2x2.5sqmm+1x2.5sqmm earth wire |
| 82 | 2 x 4 sq mm +1 x 4 dsq mm earth wire |
| 83 | 2 x 6 sq mm +1 x 6 dsq mm earth wire |
| 84 | 2 x 10sq mm +1 x 10 dsq mm earth wire |
| 85 | S/F Modular type electronic fan regularor_Supplying and fixing stepped type fan regulator on the existing modular plate swith box including connections but excluding modulalr plate etcas required. |
| 86 | S/F Suitable size G.I.Box on surface/Recesswith suitable size ofr phenolic laminated sheet cover in frontincluding providing3pin 5/6 Amp socketoutlet and 5/6 amp. Piano type switch connection as painting etc. as req. |
| 87 | S/F Suitable size G.I./PVC Box on surface/Recesswith suitable size ofr phenolic laminated sheet cover in frontincluding providing6 pin 15/16 Amp socketoutlet and 15/16 amp. Piano type switch connection as painting etc. as req. |
| 88 | S/F 2 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd |
| 89 | S/F Brass batton / Angle Holder including connection etc as reqd |
| 90 | Supply of ceiling Fan 56\"(1400mm) including all complete job as per direction of E/I. |
| 91 | I.T.C of ceiling fan including wiring the down rods of standard length(up to30cm) with 1.5 sqmFRPVC with1.5sqmmFRPVCinsulated copper conductor single core cable etc as reqd. |
| 92 | S/F”C” series SPMCB: supplying and fixing6 amps to 32amps rating,240 volts ,10KA,\"C\" curve, ,miniature circuit breaker suitable for inductive loadsof following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required. |
| 93 | 6/32 amps , single pole |
| 94 | Supplying and faixingFollowing rating,double pole 240Volts isolator in the existing MCD DB complete with connection testing and commissioning etc as reqd |
| 95 | 40 amps |
| 96 | 63 amps |
| 97 | S/F following capacity busbar chamber with 4 strips oflength 300mm made ofcoppersuitable forfollowing,capacity complete with all accessoriesincludingconnection,earthingthe body etc as reqd.. |
| 98 | 100 amps |
| 99 | S/F 32 ampflush type D.P.Switch including all complete job as per direction of E/I. |
| 100 | Supplyand fixing 9/10 watt LED Bulbincluding all complete job as per direction of E/I. |
| 101 | Supplying and drawing following pair 0.5sqmm FRPVC insulated copper conductor,unarmoured Telephone cable in the existing surface/recessed/PVC conduit as required. |
| 102 | 2pair |
| 103 | Supplying and drawing co-axial TV cable RG-6 grade 0.7mm solidcopper coductore,PE insulated with fine tinned copper braid and protecteddwith PVC sheath in the existing surface/recessed PVC conduit as required. |
| 104 | I.T.C.of exhaust Fan up to 450mm sweep in the existing 0pening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as reqd. |
| 105 | Supplying and fixingthe following way,horizontal type three pole and netural, steel M.C.B.ditrubutionbaord,415volts, on surface/recess, completewith tinned copper busbar, neutral bus bar, earth bar,din bar, interconnection powder painted including earthing etc asrequired( butwithout MCB/RCCB/Insolator) |
| 106 | 6way(4+18) Doubledoor,Horizontal type |
| 107 | Supplyingand fixing 20 amps,240 volts,SPN industrial type,socket outlet,with2 pole and earth,metal inclosed plug ,top along with 20 amps,\"C\" curve,SP,MCB, in sheet steel enclosure,on surface or in recess,with chained metal cover for the socket out let and complete with connections,testing and commissioning etc as required. |
| 108 | Supply of metal ExaustFan 12\"(300mm) including all complete job as per direction of E/I. |
| 109 | Supply fitting and fixing2.00 Ton AC(Volts/L.G.make) including all complete job as per dierction of E/I. |
| 110 | Supply and Installation of 2 Ton AC-3 star (Dalkin,Blue star or equivalent) including all complete job. |
| 111 | Supplyingand Installation of stablizer for 2 ton AC approved quality including all complete job |
| 112 | Supply and installation of 1.5 Ton AC-3 star (Dalkin,Blue star or equivalent) including all complete job. |
| 113 | Supplyingand Installation of stablizer for1.5 ton AC approved quality including all complete job |
| 114 | Installationof outdoor unit wall mount with extra copper pipe & brackets( 2mtr) including all complete job |
| 115 | Add 12 % GST (in Basic Rate must fill 12) |
| 116 | Add 1% Labour Cess (in Basic Rate must fill 1) |
AI Tender Summary
Tender Timeline
Mar 05, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender