Himachal Pradesh State Agricultural Marketing Board has published Construction Of Sub Market Yard At Vaknaghat Distt. Solan H.P. Sh Site Development Work, Building Work, Rain Harvesting Tank, Septic Tank, Water Supply Sanitary Installation And Electrical Installation Work Thereof.. Submission Date for this Tender is 19-03-2022. Electrical Maintenance Tenders in solan Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth upto all leads and lifts as directed by Engineer-incharge and disposing of all excavated earth at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportationincluding head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the workby mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . The recoveryfor stones, weather useful or not, forthe minimum quatom of 89.10 cubic meter @ Rupee 300/- Only (Rupees. Three hundred) per cubic meter Shall be effected on pro rata basis in allcircumstances. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have tobe duly compensated by him in all respects including all incidental charges. |
| 3 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drainsincluding dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soils as directedby Engineer-incharge and disposing of all excavated earth at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportationincluding head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the workby mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have tobe duly compensated by him in all respects including all incidental charges. |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and lift upto 1.5 m etc. completeconsolidating each deposited layer by ramming watering aas directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts |
| 5 | Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominalsize) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water completeexcluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directedby theEngineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing as per HPPWD specifications or as directedby theEngineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. a) 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 40 mm nominal size) |
| 7 | Supplying, filling, spreading & leveling stone boulders ofbehind retaining walls in the required thickness, for all leads & lifts, all completeas per approved drawing, design and as directed by the Engineer-in-Charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 8 | Providing and fixing on wall face unplasticised Rigid PVCpipes conforming to IS : 13592 Type A,of working pressure not less than 4.5 kg/Sq cm including filling the joints with approved adhesive complete. Weep holes 110mm dia pipes including jointing with seal ring conforming to IS : 5382, leaving10 mm gap for thermal expansion, (i) Single socketed pipes, as per approved drawing, design and as directed by the Engineer-in-Charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government.110 mm diameter |
| 9 | Providing and fixing on wall face unplasticised Rigid PVCpipes conforming to IS : 13592 Type A,of working pressure not less than 4.5 kg/Sq cm including filling the joints with approved adhesive complete. Weep holes 150 mm dia pipes including jointing with seal ring conforming to IS : 5382, leaving10 mm gap for thermal expansion, (i) Single socketed pipes, as per approved drawing, design and as directed by the Engineer-in-Charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government.150 mm diameter |
| 10 | Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 11 | Providing form work with steel plates 3.15mm (Three pointone five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 12 | Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 13 | Providing form work with steel plates 3.15mm (Three pointone five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work walls ( any thickness) including attached pilasteres,buttresses, plinth and string cources fillets, kerbs and steps etc.within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 14 | Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 15 | Providing from work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, GST, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 16 | Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heightsbelow supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 17 | Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heightsbelow supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (circular or curved in plan), up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 18 | Providing form work with steel plates 3.15mm (Three pointone five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in retaining walls, return walls, wals ( any thickness) including attached pilasteres,buttresses, plinth and string cources fillets, kerbs and steps etc.within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 19 | Providing form work with steel plates 3.15mm (Three pointone five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in Edges of slabs and breaks in floorsunder 20 cm in thickness within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 20 | Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominalsize) and curing completeexcluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directedby theEngineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 21 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) all works upto plinth levelcomplete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 22 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) all works above plinth level upto floor V level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 23 | Providing and laying Tor steel reinforcement of TATA, sail , Rashtriya Ispat or its substantial equivalent makefor Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to allfloor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 24 | Providing and laying Second class Brick workin super structure above plinth level uptoall floor level: Cement mortar 1:6 (1 cement : 6 Coarse sand) as per Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . |
| 25 | Providing and laying Second class Half brick masonryin super structure above plinth level uptoall floor level. In Cement mortar 1 : 4 (1 cement : 4 coarse sand) as per Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . |
| 26 | Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete above plinth level uptoall floor level. In Cement mortar 1 : 4 (1 cement : 4 coarse sand) as per Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . |
| 27 | Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : as per Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . a) White sand stone |
| 28 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) as per Specifications, approved drawings, designsand entire satisfactionand directions of the Engineer-in-chargeincluding carriage of materialswithin all leads and liftsand other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . |
| 29 | Stone soling tightly hand packed under floors, including watering, ramming and consolidating completeand carriage of materials, labour ,tool and plantsthrough all modes of transportation with in all leads and lifts, as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 30 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 31 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 32 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) complete as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 33 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) Pre-laminated particle board with decorative lamination on both sides |
| 34 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. with stainless steel cover plate minimum 1.25 mm thickness as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 35 | Providing and fixing aluminium tubular handle bar 32mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar |
| 36 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. completeas per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) Polyester powder coated minimum thickness 50 micron aluminium |
| 37 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) 510x19mm |
| 38 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. : (a) 300x 16 mm |
| 39 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. : (a) 250x 16 mm |
| 40 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a)300x10mm |
| 41 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a)250x10mm |
| 42 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a)200x10mm |
| 43 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) 125 mm |
| 44 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) 100 mm |
| 45 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) 75 mm |
| 46 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. Single rubber stopper |
| 47 | Providing and laying Kota stone (Table rubbed and polished) slab 25mm(twenty five milimeter)thick mirror polished of slab size not less than 550mmx550mm(five hundred fifty into five hundred fifty milimeter) inflooringwith20mm (twenty milimetre ) thick base of cementmortor 1:4 (onecement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 48 | Providing and laying Kota stone (Table rubbed and polished) slab 25mm(twenty five milimeter)thick mirror polishedin risers of steps, skirting dado and pillars laid on 12mm(twelve milimeter) (average) thick cement mortar 1:3(one cement:three sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs including rubbing and polishing completeas per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 49 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. a) 600x600mm. |
| 50 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 51 | Providing and laying Duro stone vetrified tiles (300x300mmx10mm(three hundred into three hundred into ten milimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 52 | Providing and fixing 6mm thick Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by EngineerinCharge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 53 | Providing and laying 80mm thick ISI marked heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete(Sub base concrete floor to be paid for completeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 54 | 15 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:3(One cement: Three sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 55 | 15 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:4(One cement: Four sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 56 | 6mm (six millimeter) thick cement plaster to ceiling with cementmortar 1:3 (one cement isto three sand),upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 57 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including applying additional coats wherever required to achieve even shade and colour, including carriage of materials with in all leads & lifts as per direction / satisfaction of the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 58 | Structural steel work riveted, bolted or welded in built up sections/hollow sections etc., trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete :-as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 59 | Steel work welded in built up sections/hollow sections etc.framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per approved drawing, design and as directed by the Engineer-in-Chargeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 60 | Providing and fixing moulded hand rail of M.S hollow pipe 50 mm ( fifty milimeter) dia weleded in straight length over MS flat at top of vertical balustars including one coat of red oxide priming coat complete ( M.S flat and balusters of railing shal be measured & paid for separately) and as per approved drawing, design and as directed by the Engineer-in-Chargeas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 61 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. (80x1.20 mm M.S. laths with 1.20 mm thick top cover) complete as per the architectural drawings and the directions of engineer-in-charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 62 | Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine or its substantilay equivalent makein roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 63 | Providing and fixing ridges or hips 60 cm over all with 0.45mm thick prepainted steel sheets of TATA DURASHINE TATA Durashine or its substantilay equivalent make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating+ back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 64 | Providing and fixing valley 90 cm over all 0.45 mm thick prepainted steel sheet of TATA DURASHINE TATA Durashine or its substantilay equivalent make in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia with prepainted G.I. limpet and bitumen whashers complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 65 | Providing and fixing flushing 38 cm overall with 0.45mm thick prepainted steel sheets of TATA DURASHINE or its substantilay equivalent make in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as requiredas per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 66 | Providing and fixing 15cm. Wide 45 cm. Overall semicircular plain G.I. Sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. Including making necessary conections with rain water pipe complete as per design.0.63 mm thick sheet.as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges |
| 67 | Providing and fixing M.S BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer .,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment |
| 68 | Providing and fixing on wall faces PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/Sq cm including filling the joints with approved adhesive complete. Weep holes 150mm dia pipes etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment |
| 69 | Providing and fixing on walll faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain Bend 150mm dia etccomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment |
| 70 | Providing and fixing 150mm dia PVC clamps for PVC pipes with steel screws and rawl plugs complete including carriage of materials, labour, tool and plantthrough all modes of transportation within all leads and liftsas per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 71 | Applying birla wall putty putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 72 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primercomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 73 | Painting two or more coats coats including primer coat after filling the surface with Synthetic enamel paint in all shades on new plastered/ concrete surfaces as per drawing and technical specification.including carriage of materials with in all leads & lifts as per direction / satisfaction of the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 74 | Applying priming coat of approved brand and manufacture on new steel & other metal based suyrfaces etc.as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 75 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work etc. complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 76 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.as per approved drawing, design and as directed by the Engineer-in-Charge and as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 77 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all etc. complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 78 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. |
| 79 | Providing and fixing to wall ceiling and floors galvanized mild steel tubes 15 mm nominal bore (medium grade) tubefitting and clamps including making good the wall ceiling and floors ISI markedper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 80 | Providing and fixing to wall ceiling and floors galvanized mild steel tubes 20 mm nominal bore (medium grade) tubefitting and clamps including making good the wall ceiling and floors ISI markedper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 81 | Providing, fixing and laying in trenches galvanized mild steel tube 15 mm nominal bore(Medium grade) tube fitting (earth work in trenches to be measured and paid for separately)per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 82 | Providing, fixing and laying in trenches galvanized mild steel tube20 m nominal bore (Medium grade) tube fitting (earth work in trenches to be measured and paid for separately)per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 83 | Making connection of galvanized steel distribution branch with galvanized mild steel main line 20 to 40 (Twenty to Forty) millimeters nominal bore, cutting and threading the pipes complete,per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 84 | Providing and fixing water meter and stop cock in GMS tube of 15 (Fifteen) millimeters nominal bore 1including necessary fittings such as mild steel galvanized jam nut sockets etc. cutting and making long screws complete, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 85 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the GovernmentConcealed work, including cutting chases and making good the wall etc. (a)1216 (16 mm O.D. pipe) |
| 86 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . Concealed work, including cutting chases and making good the wall etc. (a)1620 (20 mm O.D. pipe) |
| 87 | Providing and fixing various capacity.store well branded ISI marked Polythene water tank with 40 (Forty) millimetre nominal size bore galvanized Mild Steel scour tube with fitting 25 (Twenty Five) millimetre nominal bore galvanized Mild Steel overflow tube with fittings and mosquito proof coupling of approved municipal design 15 (Fifteen) millimetre nominal size ball valve and mosquito proof PVC cover with locking arrangement including providing pads of size as required for inlet and outlet tube complete ISI markedper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 2000 litres net capacity tank |
| 88 | Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesivecompleteper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . (a) 110 (One hundred ten) millimetres nominal size. |
| 89 | Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesive completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . (a) 75 (seventy fivemillimetres nominal size. |
| 90 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government . (a) 110 (One hundred ten) millimetres nominal size. |
| 91 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 150 (One hundred fifty) millimetres nominal size. |
| 92 | Providing and fixing PVC ISI marked floor traps of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors:per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110x 90 mm(one hundred ten into ninety) milimeter. |
| 93 | Providing and fixingPVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesiveper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 (One hundred ten) millimetres nominal size. |
| 94 | Providing and fixingPVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 (Seventy five) millimetres nominal size. |
| 95 | Providing and fixingPVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 96 | Providing and fixingPVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 97 | Providing and fixingPVC single equal branch plain ISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 98 | Providing and fixingPVC single equal branch plain ISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 99 | Providing and fixingPVC collars ISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 100 | Providing and fixingPVC collars ISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 101 | Providing and fixingPVC plain bendISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 102 | Providing and fixingPVC plain bendISI marked including fixing with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 103 | Providing and fixingPVC "P" or "S" trap for water closet ( squatting pan)ISI marked including jointingthe trap with the pan and PVC pipe with approved adhesive etc. completeper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 104 | Providing and fixing PVC cowl including carriage of materialsper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 110 mm dia |
| 105 | Providing and fixing PVC cowl including carriage of materialsper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 75 mm dia |
| 106 | Providing and fixingviterous China water closet squatting pan (Indian Type W.C. pan) size 580mm (Earth work, bed concrete, foot rest and traps to be measured and paid for separatelyper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) Orrissa pattern long pattern as per Hindware catlogue No. 20004.:- |
| 107 | Providing and fixingviterous China wash, down water closet (European Type W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and coveto be paid for separately.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) Anglo Indian of Hindware or its equivalent |
| 108 | Providing and fixing 10.00 ltr.capacityPVC low levelduel flushing cistern CERA catlogue No. 2603 or equivalenetwith a pair ofbrackets with fittings such as lead valve, less syphon, 15mm nominal size PVCball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40 mm dia PVC flush bend with cistern and closet & over flow pipe to be paid for separately)per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 109 | Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (i) Solid Type :- (a) White plastic seat and cover :- |
| 110 | Providing and fixing first quality of white shadeviterous China bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp(waste pipe to be measured and paid for separately)per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) Flat back type (430mm x 260mmx 350mm)of hindware |
| 111 | Providing and fixingautomatic flushing cistern with a pair of C.I. or M.S. bracket complete with a pair of C.I. or M.S. bracket complete with fittings including C.I. syphonic apparatus, mosquito proof lid, C.P. brass union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over floe pipe to be measured and paid for separately) per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (i) Vitreous china of Hindware or its eqivalent make .(a) 5 litres capacity. |
| 112 | Providing and fixingC.P. brass flush pipe / spraders for urinal with fittings such as unions, clamps etc.( all C.P.) including cutting holes and making good the same.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (a) 15 mm nominal bore. |
| 113 | Providing and fixing viterous China division plate for urinalof Hindware or its equivalent make of size 600x300 mmper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 114 | Providing and fixingviterous China wash basin of Hindware Cat No. 10001 or equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittingper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government (i) Flat back :-(a) 550 X 400 mm |
| 115 | Providing and fixing rubber plug for wash basinper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government .(a) 32 mm dia |
| 116 | Providing and fixing Hindware Vitreous China padestal for wash basin complete recessed at the back for receiption pipe anf fittings.per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 117 | Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sinkper HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-(a) 32 mm dia |
| 118 | Providing and fixing MI union for wash basin or sink as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government(a) 32 mm dia |
| 119 | P/F 32 mm dia lead waste pipe for wash basinas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 120 | P/F CP bottle trap for wash basin 32 mm diaas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 121 | Providing & fixing 100mm dia C.P. grating for floor or nahani/gully/floor trap as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 122 | Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washeras per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 123 | Providing and fixing 600mmx120 mm glass shelf with C .P brass and guard rail complete, fixed to wooden plugs withC. P brass screw as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 124 | Providing and fixing toilet paper holder including carriage of materialsas per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-(a) C.P. brass :- |
| 125 | Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS : 8931 and 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-600 X 20 mm |
| 126 | Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 127 | Providing and fixing CP brass bib tap(heavy duty ISI marked IS:8931 & 8934) of jaquar with capstan head as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-15 mm dia |
| 128 | Providing and fixing CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934)as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-15 mm dia |
| 129 | Providing and fixingC.P.brassangle valve of jaquar(heavy duty ISI marked IS:8931 & 8934)as per HP.PWD., Specificationsincluding carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-15 mm dia |
| 130 | Providing and fixing PVCconnection pipe (heavy duty ISI marked IS:8931 & 8934) with brass union as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-45 cm length --15 mm dia |
| 131 | Providing and fixing brass full way valve with wheel as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government :-20 mm nominal bore |
| 132 | Providing and fixing PTMT fancy bib cock with spout no .1391 of approved quality and colour as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government. 15 mm |
| 133 | Providing and fixing PTMT push cock of Prayag with reducer of approved quality and colour as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government--20mmx15mm |
| 134 | Providing and fixing PTMT angle cock of Prayag of approved quality and colour --15 mm with flange as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 135 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved/ directed by the Engineer-in-Charge as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 136 | P/F 40 mm dia CP grab bars for handicapped toilet as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 137 | Providing and laying 110 mm dia high pressure waste and ventilating pipes etc.as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 138 | Providing and fixing in position pre cast RCC mainhole cover and frame of required shape and approved quality LD-2.5 rectangular shape 600x450mm internal diemensions complate as per HP.PWD., Specificationsincludng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 139 | Providing and fixing 300x300mmpre cast RCC cemocrate or equivalent cover and frame of required shape and approved quality for ully trap as per HP PWD, Specifications including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax orother taxesimposed by the Government |
| 140 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 141 | Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Group C. |
| 142 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required..2x1.5 Sq. mm |
| 143 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 144 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of for earthing as required. a) 2x6.0 Sq. mm.+6 sq mm earthing |
| 145 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of for earthing as required. a) 2x10 Sq. mm.+1*6sq mm for earthing |
| 146 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 147 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. |
| 148 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. |
| 149 | Providing and installation of following type of surface mounting slim circular type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. a) 22 watt |
| 150 | Providing and installation of following type of surface mounting slim circular type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. a) 15 watt |
| 151 | Providing and installation of following type of surface mounting slim circular type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. a) 10 watt |
| 152 | Providing and installation of following type of surface mounting slim square type LED panel in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making suitable cut-out in the existing ceiling, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge LED panel 2*2 feet 36 Watt |
| 153 | Providing,Installation,testingandcommissioningofceilingfanwithregulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenoliclaminatedsheetcover onthefanboxandearthingetc.asrequired:of Approved Make fan 1200 mm sweep with regulator |
| 154 | Providing,Installation,testingandcommissioningofceilingfanwithregulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenoliclaminatedsheetcover onthefanboxandearthingetc.asrequired:of Approved Make fan 1400 mm sweep with regulator |
| 155 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty, (Domestic) 225 mm sweep |
| 156 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty, (Domestic) 300 mm sweep |
| 157 | Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. Led Batten 10 watt |
| 158 | Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. Led tube 20 watt |
| 159 | Supplyingand fitting energy saving, surface mounted, decorative over bulk head LED luminaire comprising of highbrightness LEDscomplete withconnectionstesting & commisioning etc as required. LED 9 W approved make syska havells bajaj or any other approved by engineer in charge |
| 160 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-25 Liter capacity water heater (Cat-A) |
| 161 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-8 way |
| 162 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-12 way |
| 163 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, "C" curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Double pole. Cat-A. |
| 164 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, "C" curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Single pole. Cat-A. |
| 165 | Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required |
| 166 | Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. |
| 167 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. |
| 168 | Supplying and laying 8 SWG Copper wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required. |
| 169 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-Armoured cable 35 sq. mm (3.5 core) |
| 170 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-Armoured cable 16 sq. mm (4 core) |
| 171 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-Armoured cable 6 sq. mm (twin core) |
| 172 | Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.100 Amp. -16 KA |
| 173 | Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.63 Amp. -16 KA |
| 174 | Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 450mm & crosssectional area (25mmx6mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:- |
| 175 | Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 450mm & crosssectional area (25mmx6mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:- |
| 176 | Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- having space for 10 meter boards including main MCCB and bus bar and voltmeter and ammeter switch having Double pole for each meter board ..450 mm deep (nominal) |
| 177 | Supplying and erection of Galvanized Iron (G.I.) pipe pole "A" quality of suitable length and dia. 4.85 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:-6 Meter long having nominal bore dia. 80 mm planting depth 120 cm with pit depth 135 cm |
| 178 | Providing & fixing 50 W LED street light fitting consist of Pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic coverfor Nominal Voltage (V) 240 V, mains current .330 A , Suitable for pole dia Ø 43 mm (max.)Make:Havells,Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge. |
| 179 | Suppling & Fixing, Testing,Commissioning of storage type water cooler with reciprrocating compressor of ISI marked, environment friendly new age refigerant of rugged stainless steel/galvanized steel body. Total storage capacity 150 Lt. and cooling capacity 150 Lt/hr with 2 nos of faucets and all accessories etc . Usha ,Blue Star,Carrier or its equilant make complete in all respectswith best satisfaction of Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
