Construction Of 11 Kv Line With 11Kv / 0.433 Kv Substation For Rcp Stations At Giddha And Khaira Under Hbpl Project In Bihar Construction Of 11 Kv Line With 11Kv / 0.433 Kv Substation For Rcp Stations At Giddha And Khaira Under Hbpl Project In Bih
Tender Overview
Project Description
Construction Of 11 Kv Line With 11Kv / 0.433 Kv Substation For Rcp Stations At Giddha And Khaira Under Hbpl Project In Bihar Construction Of 11 Kv Line With 11Kv / 0.433 Kv Substation For Rcp Stations At Giddha And Khaira Under Hbpl Project In Bihar
BOQ
| Sl. No. | Item Description |
| 1 | Construction of 11 KV line with11KV/0.433 KV substation for RCP stations at Giddha and Khaira under HBPL project in Bihar |
| 2 | Supply and stringing ACSR Rabbit conductor of cross sectional area55 sq. mm |
| 3 | Supply and erection of 9m, 400 kg PSC polesalong with all accessories like 11 kv V-cross arms, Back clamp for V-cross arm, 100x50x6 mm channels (MS), top bracket of 75x40x6 mm MS channelpainted with red oxide and aluminium paint, GI F bracket with bolts and nuts, pole earthing complete with coil earthing with GI rope - 35 sq.mm, GI barbed wire as anticlimbing device, danger plates, number plates and clamps with bolts & nuts, MS nut, bolts. washers, tape etc.including that for concreting of pole as per standard approved drawing/ schedule and ISS/ REC(excluding insulators and stay sets) |
| 4 | Supply and erection of GI stay set (HT) with insulator complete including concreting, stay wire, clamp, all hardware etc. as per standard approved drawing and ISS/ REC |
| 5 | Supply and erection of 11 kV pin insulators with 11 kV GI pin as per standard approved drawing/ schedule and ISS/ REC |
| 6 | Supply and erection of 11 kv disc insulators along with 11 kV hardware fittings (B&S type) as per standard approved drawing/ schedule & ISS/REC |
| 7 | Supply and erection of 9m, 400kg PSC Double Pole structure with 100x50x6 mm channels, 75x40x6 mm MS channels and 50x50x6 mm MS angles with coating of red oxide and aluminium paint for support of transformersGI barbed wire as anticlimbing device, danger plates, number plates and clamps with bolts & nuts, MS nut, bolts. washers, tape etc.including that for concreting of pole as per standard approved drawing/ schedule and ISS/ REC(excluding insulators and stay sets |
| 8 | Supply and erection of 11 kV AB switch setwith base channel & supporting angle-1 set |
| 9 | Supplyand erection of 11 kV HG fuse set 3 pole |
| 10 | Supplyand erection of 11 kV Lightning arrestor with base channel & supporting angle-1 set |
| 11 | \"EARTH ELECTRODES Supplying,installation, testing of GI earthingelectrode, including the supply and installation of the CI cover, charcoal etc. and construction of chamber; complete as per drawings, specifications and directionsof the Site Engineer, including the cost of all labour, tools, materials etc. complete in all respects.(Refer enclosed drawing)\" |
| 12 | Supply and erection of 63 KVA, 11/0.4 KVtransformer (AL wound) |
| 13 | Supply and installation of LT Distribution Box including Changeover box , Bus Bar &with MCB for 63 KVA S/S (As per SBPDCL/NBPDCL specification) |
| 14 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed by the Engineer-in-Charge :In all kinds of soil |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 16 | Supply of 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density<40%: AL, 3½C x 95 mm² |
| 17 | Cable LayingLayingofall typeof cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and installation of all required materialssuch as fixingclamps ,screws, cable straps,tags etc.as required (other than the supplyof the conduits, cables, pipes, cable racks, trays,poles,structures and panels) completeinall respect, including cost of alllabour, tools, consumable materials etc. and cutting the cables in required lengths asper drawings, specification and directionsofSite Engineer / Engineer-in-Charge : Power cables LT :OD above 20 mm and upto 40 mm |
| 18 | Supply and erection of GI rope - 35 sq.mm |
| 19 | Supply and erection of 40 mm x 5 mm GI Strip |
| 20 | 3 phase energy meter with Box |
| 21 | Lumpsum charges for coordination with electrical authorities for inspection of electrical facility and line charging & installation of energy meter (any govt fee/Supervision Charge or licence fee paid to the authorities shall be reimbursed separately on proof of submission of actual bills) |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender