Tn-Mm-1676 Supply Of Spare Parts For Flame Scanner And Hea Ignitors At Sstps, Suratgarh. , Supply Items:- , Collimeter Tube P.No.-A- 984-0478 , Lens Barrel Assembly P.No.-B- 984-0318 , Fibre Optic Cable P/N: B-984-0322 , Plug Bhel P/N: A-987-0030 , Detector Head Assembly P.No.-C- 984-0663 , Scanner Housing Card P.No.-D- 984-0577 , 5-Pin Female Connector With Pig Tail Cable Bhel P/N: C-984-0242 , Screw P/N: D-984-0633 , Quartz Lens P.No.-A- 987-029 , Remote Meter Assembly (4 Flame Intensity Meter Set) , Power Supply Card, P/N: D-984-0582 , Intensity & Fault Detection Card, P/N: D-984-0578 , Frequency Detection Card, P/N: D-984-0579 , Lamp & Meter Card, P/N: D-984-0721 , Lamp Drive Card (Safe-Ii), P/N: D-20-0-0259 , 2/4 Flame Indication Card, P/N: D-984-0581 , Spacer, P/N: A-984-0475 , Mounting Plate, P/N: A-984-0472 , Compression Spring, P/N: A-987-026 , Jam Nut, P/N: Item 31 Of D-982-0137 , Gasket, P/N: A-984-0474 , Connector, Ms-3470 L 145 Pn, 5 Pin Male, Suitable For Scanner Head Assembly P/N: Item 11 D-982-0137 , Protector Plate P/N: B-984-0316 , Fuse, Part No. 23 (Little Fuse For Lamp & Meter Card) P/N: D-984-0721) , Alumina Insulator For Spark Rod Assembly , Complete Flame Scanner Assembly P/N: C-982-0141 , Flexible Cable Assembly With High Temp. Cable With Metal Braided Armoured Ss Conduit With Pvc Outer Protection Length: 3650+-50 Mm , Operating Voltage: 3600 Vdc, Pin Connection Suitable For Hea Ignitor Rod & Excitor Box, Operating Temperature: 150°C) , Excitor Box (Input :110Vac ,50 Hz ,Input Current: 5 A Ac ,Output Voltage-2500 V Dc With Nema Enclosure ,Bhel Code : 0775.0004.01) , Storage Capacitor, 10 Mfd, 2500V Dc , Spark Tip Of Hea Ignitor:- (Length 7 Inch, Dia 5/8 Inch Suitable To Pin Connection Of Spark Rod ,Operating Temp. 750 °C At Tip End.,106 Sparks (Or) 10000 Burner Starts Of 15-20 Sec./Each. Start With End Seal To Avoid Oil Soaking Into The Spark Tip. , Rectracter For Hea Ignitor (With 1 No. Heavy Duty Cylinder 38 Mm Dia, Equipped With Solenoid Valve For Controlling The Pneumatic Cylinder Such That Energise To Advance Spark Rod, Deenergise To Rectract Spark Rod. Also End Point Limit Switches To Signal The Advanced Or Retracted Position Of The Spark Tip. Limit Switch 2 Nos Dpdt Type Clamp Assy. Should Be Firm And Designed Such That Clamping/ Declamping Does Not Disturb Limit Switch. All Wiring From Solenoid Valve & Limit Switches Shall Be Termitted In A Junction) Solenoid Operating Voltage: 110 Ac, Air Cylinder Stroke Length: 8 Inch , Solenoid Valve (Input : 110V Ac)For Hea Ignitor , Hea Ignitor Rod ( Flexible Spark Rod Of Dia. 5/8” Stainless Steel Tube With 30” Flexible Section With Cable Connection, Total Length-100”, Pin Connection, Voltage-3600 V Dc, Operating Temp At Hot End-650 Oc , Cold End 150 Oc ). , Solenoid Coil (Input: 110V Ac) For Hea Ignitor , Solenoid Valve (Input:240 V Ac For Hea Ignitor , Seal Kit For Air Cylinder Of Hea Ignitor , Transformer Suitable For Hea Ignitor Excitor Box Input: 110 V Ac , Spark Gab Tube For Excitor Box , Rectifier For Excitor Box , Inductor For Excitor Box , Resistor,R1 For Excitor Box , Resistor,R2,R5 For Excitor Box , Resistor,R3 For Excitor Box
