Water Supply Scheme At.Nagapur G.P Karanji Tq.Basmat Dist.Hingoli
Tender Value
19.19 Lakhs
Estimated cost
Bid Submission
11 Mar 2022
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
basmat → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Water Supply Scheme At.Nagapur G.P Karanji Tq.Basmat Dist.Hingoli
BOQ
| Sl. No. | Item Description |
| 1 | Solar Grid :- Item No.1 Grid coneection of roof top Solar power plant as per central government bench mark date 15.06.2018 Add :- The Supply rates shall be increased by RS. 600/- Stage for pump with more than 8 stages |
| 2 | Pumping Machinary :- Providing and errecting giving test of 100 mm dia Submersible Pumsets to IS 8034 and motor confroming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and on 415 + 10 %, 3 Ph, 50 H., A.C. supply with cable guard, trust carbon/ fibre bearing to with stand entire hydrulic rust, waterproof winding shall be suitable for direct coupling. Manufacturies design. Antitrust stream lined non return shall be provided with the pump. suitable suction strainer shall also be conductor submerssible type flat cable 3 m and 2 pairs of errection clamps 65 mm width 10 mm thick shall be provided alongwith the pump. Rates per pump upto 8 stages are as below ( MJP. ME DSR 2021-22 I. No. PM2-5 P. No. 2 ) Add :- The Supply rates shall be increased by RS. 600/- Stage for pump with more than 8 stages Basic rates =3.00 Bhp (82 M Stage |
| 3 | Item No.2 Pannel board Providing and errecting Commissisioning and testing swell LT Panel Board comprising( MJP. ME DSR 2021-22 I. No. |
| 4 | Item No.3 Supplying and errecting flat flexible 3 core 4.0 Sq. M PVC sheathed submersibble trpe copper cable ( MJP. ME DSR 202122 I. No. CB1-3 P. No.75 )3 core 2.50 Sqm |
| 5 | Item No.4 Taking 6\" Dia Surface bores at required depth with Boring machine with all Labouries & Machinary & fuels etc. comp. ( as per G. S. D. A. ) Surface Bore |
| 6 | Casing |
| 7 | End Cap |
| 8 | Yield Test |
| 9 | Item No.5 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all local & central taxes etc.complete MJP DSR 2021-22 I No1-b-v P.No.113 63 mm Dia |
| 10 | Item No.6 Providing and supplying ISI mark CI D/F reflux valves (nonreturn valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement - PN 1.6MJP CSR AS PER 2023-21I. No.1AP. No.132 2mm dia |
| 11 | Item No.7 Lowering and supplying in standard length polyethelene Pipes, confirming to IS 4984 / 14151 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all local & central taxes etc.complete MJP DSR 2021-22 I No-2-x P.No.11550mm dia |
| 12 | Item No.8 Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.)MJP CSR AS PER 2023-21I. No.4 P. No.135 50mm dia |
| 13 | RISING MAIN :- Item No.1 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvemt cement, etc. complete (selffit type to be jointed with cement solvent). Working Pressure 6 Kg./Sq.cm as perMJP CSR AS PER 2023-21I. No.1-BP. No.7690 MM PVC 6 Kgf/SqM |
| 14 | Item No.2 Providing ISI mark G.I. pipe of following class and dia. Including all local and central taxes, octroi, inspection charges, transportation to stores, etc. complete MEDIUM class MJP DSR AS PER 2023-21I. No.1bP. No.82 15.00mm Dia. |
| 15 | Item No.3 Providing and supply at. Site of of work PVC/ G.I. Pipes specials suitable for above said pipes incuding cost of taxes, fright charges, octrai, lloading, unloading , conveying to deparmental store etc. complete. as perMJP CSR AS PER 2023-21 2 % of I.no. 1 + 2 |
| 16 | Item No.4 Providing and supplying Air Valves as per IS-10845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloding, transportatoin upto departmental stores / site, etc. complete. a) Air Valve Double Ball Flanged Type - PN 1.0as perMJP CSR AS PER 2023-21I. No.5P. No.13640 mm |
| 17 | Item No.5 Supply of C.I. Mechanical Joint Double Socket with Flanged Tees as dimensionally described in Table-19 of IS13382 / 1992 complete with sealing rubber gaskets of SBR (dimensionally described in IS-12820 / 1989) with cast iron followergand and mild steel nut bolts coated or other wise protected from rusting and suitable for C.I. pipes.as perMJP CSR AS PER 2023-21I. No.8P. No.14880x80x80 |
| 18 | Item No.6 Providing and supplying ISI mark CI D/F reflux valves (nonreturn valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement - PN -1.6MJP CSR AS PER 2023-21I. No.1AP. No.13280 mm |
| 19 | Item No.7 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M MJP CSR AS PER 2023-21I. No.1P. No.42 |
| 20 | Item No.8 Excavation for foundation / pipe trenches in hard murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 MMJP CSR AS PER 2023-21I. No.2 P. No.42 |
| 21 | Item No.9 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M as peMJP CSR AS PER 2023-21I. No.3 P. No.42 |
| 22 | Item No.10 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 MMJP CSR AS PER 2023-21I. No.5 P. No.42 |
| 23 | Item No.11 Filling in plinth and floors / trenches with contractor’s murum for bedding in 15cm to 20cm layers including watering and compaction complete.MJP CSR AS PER 2023-21I. No.17 P. No..45 |
| 24 | Item No. 12 Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint). Working Pressure 6 and 10 Kg./Sq.cm. as per MJP CSR AS PER 2023-21I. No.3bP. No. 80110 mm dia |
| 25 | Item No. 13 \"Hydrullic testing of PVC pipeline to specified pressure incl. cost of all materials and lbour and water for testing for specified length including cutting, placing and end cap making arrangement for filling safe water using reciprocating type pumpss which should be able to provide specified test pressure gauges and other neceassary equipments, laboures operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, it necessary and reinstating to original position using water etc. complete. MJP CSR AS PER 2023-21I. No.5aP. No.81 For rising main |
| 26 | Item No.14 Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-incharge.MEDIUM as per MJP CSR AS PER 2023-21I. No.2bP. No.8380mm |
| 27 | Item No.15 Hydrullic testing of GI pipeline to specified pressure incl. cost of all materials and lbour and water for testing for specified length including cutting, placing and end cap making arrangement for filling safe water using reciprocating type pumpss which should be able to provide specified test pressure gauges and other neceassary equipments, laboures operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, it necessary and reinstating to original position using water etc. complete. MJP CSR AS PER 2023-21I. No.3P. No.8380mm |
| 28 | Item No. 16 Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.)(MJP I.No. 4 P.No. 1 80mm |
| 29 | Item No.17 Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) Foundation on Murun and Harder Strata.as per MJP CSR AS PER 2023-21I. No.17biP. No.140 |
| 30 | Item No.19 Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lifts incl. Consolidationm surching , etc. comp as per MJP CSR AS PER 2023-21I. No.15P. No.45 |
| 31 | Item No.20 Providing and laying in situ ( 1:3:6) ( M-100) grade of C.C. of trap/ granite/ quartizite/ gneiss metal for foundation and bedding including dewatering form work compaction curing finishing etc. complete with initial lift of 1.50 m below/ above ground level.as per MJP CSR AS PER 2023-21I. No.1bP. No.40 |
| 32 | ESR For 30000 Ltr :- Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staire case from ground level to roof level, M.S.Grill gate of 2 Mtrs height with locking arrangement, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab and epoxy paint to internal surface & anti-termite treatment for underground parts of the structures and giving satisfactory water tightness test as per I.S. code, The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge. ----Capacity 24000 Liters 12 M. st. height. OpenFoundation Basic Rate :-(24000 Litre capacity) :-720240 Deduction 5 % for Zone II = 36012 Basic Rate :-720240 -36012 = 684228 |
| 33 | Item No.2 Providing and supplying ISI standard CI double flanged pipes including all taxes (Central and local), railway freight,insurance,unloading from railway wagon,loading into truck,transport to stores / site, unloading, stacking, etc.complete as directed byEngineer-in-charge.as per MJP CSR AS PER 2023-21I. No.5 P. No.60 80mm Dia |
| 34 | 80 mm Dia. |
| 35 | Item No.3Providing ,erecting, connecting double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200 generally conforming in BS 5155, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding C. C. foundation/ structural steel support confirming to IS 13095-1991, Sluice valves - PN -1 as perMJP CSR AS PER 2023-21I. No.3 P. No.12880 mm dia |
| 36 | 80mm Dia |
| 37 | Item No.7 Providing and supplying ISI standard CI flanged / S& S specials including all taxes (Central and local), railway freight, insurance, unloading from railway wagon, loading into truck transport to depermental store site, unloading stacking etc. complete.MJP CSR AS PER 2023-21I. No.6aP. No.60 |
| 38 | Distribution System :- Item No.1 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M MJP CSR AS PER 2023-21I. No.1P. No.33 |
| 39 | Item No.2 Excavation for foundation / pipe trenches in hard murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M MJP CSR AS PER 202321I. No.2 P. No.33 |
| 40 | Item No. 3 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M as peMJP CSR AS PER 2023-21I. No.3 P. No.33 |
| 41 | Item No. 4 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-incharges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 MMJP CSR AS PER 2023-21I. No.5 P. No.33 |
| 42 | Item No. 5 Excavation for foundation / pipe trenches in hard rock and concrete road by chissling, wedging, line drilling, by mechncally means or by any other means other than blasting incl. trimming and leveling the bed removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-incharges, normal dewatering, preparing the bed for foundation and ex6MJP CSR AS PER 2023-21I. No.7 P. No.34 |
| 43 | Item No. 6 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20cm layers including watering and compaction, etc. complete..MJP CSR AS PER 2023-21I. No.15P. No.37 |
| 44 | Item No.7 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvemt cement, etc. complete (selffit type to be jointed with cement solvent). Working Pressure 90 mm 4 Kg./Sq.cmMJP CSR AS PER 2023-21I. No.1 P. No.69 75 MM DIA.PVC4 kg/ Cm |
| 45 | Item No.8 Providing and supplying at work site of work PVC/ GI specials suitable for above said pipes including cost of taxes, fright charges, cotroi, loading, unloading conveying to department store.asMJP CSR AS PER 2023-21 5 % of I.No. 4 |
| 46 | Item No.9 Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint). Working Pressure 90 mm 4 Kg./Sq.cm.MJP CSR AS PER 202321I. No.4P. No 70 75 MM DIA.PVC4 kg/ Cm |
| 47 | Item No.10 \"Hydrullic testing of PVC pipeline to specified pressure incl. cost of all materials and lbour and water for testing for specified length including cutting, placing and end cap making arrangement for filling safe water using reciprocating type pumpss which should be able to provide specified test pressure gauges and other neceassary equipments, laboures operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, it necessary and reinstating to original position using wateretc. complete. MJP CSR AS PER 2023-21I. No.5aP. No.81 75 MM DIA.PVC4 kg/ Cm |
| 48 | Item No.11 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.MJP CSR AS PER 2023-21I. No.15 P. No.37 |
| 49 | Item No.12 providing and laying in situ 1:2:4(M150) of grade of C.C of trap / granite/ quartzite / gneiss metal for foundation and bedding incl. Dewatering, form work, compacting and curing finishing etc. comp with intinal lift of 1.5 M below/ above ground level MJP CSR AS PER 2023-21I. No.1b P. No.41 |
| 50 | Item No. 13 Providing double flanged Sluice Valves conforming to IS-2906 / 14846 including worm gear arrangements as per test pressure,stainless steel spindle,caps,including all taxes,transportation, etc. complete. Sluice Valve Sluice Valve PN1.0 (without by pass arrangement ) PN -1.0 MJP CSR AS PER 2023-21I. No.2P. No.12865mm |
| 51 | Item No. 14 Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.)as perMJP CSR AS PER 2023-21I. No.4P. No.13065mm |
| 52 | Item No. 15 Providing and fixing C.I.road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete.MJP CSR AS PER 2023-21I. No.5bP. No..210100mm x 225mm |
| 53 | For Trial |
AI Tender Summary
Tender Timeline
Mar 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender