Jjm Sch Sh Constr Of 04 Nos. Sbdtw At ( I ) Jamatia P. ( Ii ) Paschim P. ( Iii ) Tr Coloney S.B School Iv ) Reang Para Within Kakraban R.D. Block Undr Dws S / D Kbn, G. Tripura During The Yr 21-22. ( 2Nd Call ) Jjm Sch Sh Constr Of 04 Nos. Sbdtw
Tender Value
20.38 Lakhs
Estimated cost
Bid Submission
19 Mar 2022
0 days left
EMD
20384
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kakraban → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Jjm Sch Sh Constr Of 04 Nos. Sbdtw At ( I ) Jamatia P. ( Ii ) Paschim P. ( Iii ) Tr Coloney S.B School Iv ) Reang Para Within Kakraban R.D. Block Undr Dws S / D Kbn, G. Tripura During The Yr 21-22. ( 2Nd Call ) Jjm Sch Sh Constr Of 04 Nos. Sbdtw At ( I ) Jamatia P. ( Ii ) Paschim P. ( Iii ) Tr Coloney S.B School Iv ) Reang Para Within Kakraban R.D. Block Undr Dws S / D Kbn, G. Tripura During The Yr 21-22. ( 2Nd Call )
BOQ
| Sl. No. | Item Description |
| 1 | Drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer - in - charge. i) 100 mm dia |
| 2 | Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer - in - charge.i). From 100 mm dia. pilot hole to 250 mm bore hole- |
| 3 | Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer - in - charge. |
| 4 | Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer - in - charge. C.M Casing Pipe.i) 150 mm dia |
| 5 | ii) 100 mm dia |
| 6 | B. RS pipeiii) 100 mm dia |
| 7 | Providing and fixing of UPVC reducersuitable for UPVC \"CM\" casing or \"CS\" casing or \"RS\" pipes as per specification and direction of the Engineer - in - charge.i) 150 x 100 mm dia |
| 8 | Providing and fixing ofUPVC end cap / well cap Suitable for UPVC \"CM\" casing or \"RS\" pipes as per specification and direction of the Engineer - in - charge. i) 100 mm dia |
| 9 | Providing and fixing of housing clamp ( made with 12 mm thick MS sheet ) along with well cap (made with 10 mm thick MS sheet ) with necessary arrangements for SBDTW as per specification and direction of the Engineer - in - charge. iii) 150 mm dia |
| 10 | Providing and shrouding of the deep tube well assembly with washed pea gravels ( 2.0 - 4.75 mm effective size ) as per specification ( IS : 4097) and direction of the Engineer - in -charge. with pea gravels obtained from Durgapur, West Bengal. |
| 11 | Supplying and installation of water lubricated submersible pump having ISI mark of capacity 2000 GPH of total head upto 60mtr.Couple with submersible motor 3 HP suitable for 240voltage(+10% variation single phase 50HP,AC supply DOL starting method to run 2880 RPM along with 35mtr 2.5sqm,PVC insulated 3(Three)core flat copper cables including fitting fixing and lowering with 40mm dia GI pipe upto 100ft.(30.00mtr.)etc complete as per direction of the Engineer-in-charge(cost of 40mm dia. Gland fittings will be paid seperately) |
| 12 | Providing and fixing C.I. non-return valve of approved quality as per CPWD specification and direction of the Engineer - in -charge.i)50 mm nominal bore |
| 13 | Supplying and fitting fixing of KIOSK(Size 450mm x 200mm x 850)fiited with 4 Nos support of 75mm x 75mm (^mm thick) MS angle of embedding with 1:2:4 cement concrete base(size:300mmx300mmx600mm) with proper locking arrangement and coating with anti corrosive paints(both inside and outside)in/c complete in all respect as per direction of the Engineer – in – charge. |
| 14 | Providing and fitting fixing of single phase motor starter panel unit 3.0HP capacity comprising with 2 plate conductor,over load relay,capacitor,volt meter of BCH/L&T make with necessary copper wire etc complete as per direction of the Engineer-in-Charge |
| 15 | Excavating trenches of required widthfor pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm(slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge.A. For UPVC pipes in new work a. In all kinds of soili) For pipes not exceeding 90mm dia |
| 16 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as perCPWD specification and direction of the Engineer - in - charge.A. External work.i) 15 mm dia. nominal bore |
| 17 | ii) 40 mm dia. nominal bore |
| 18 | Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cementconforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as perCPWD specification and direction of the Engineer - in - charge.A. Class - 3 ( working pressure 6.0 kg / cm2)i) 40 mm dia |
| 19 | Providing and laying of flexible PVC pipe (conforming to IS:7634) complete as per specification and direction of the Engineer - in - charge (cost of earth work and fittings will be paid separately). i) 15 mm dia |
| 20 | ii) 20 mm nominal bore |
| 21 | Making road crossing by horizontal boring for smooth laying of UPVC / CI / DI / GI pipes etc. of required dia complete as per specification and the direction of the Engineer-in-charge.A. by manual means |
| 22 | Providing and fixingG.I. Full way valveas perCPWD specification and direction of the Engineer - in - charge. i) 15mm dia |
| 23 | ii) 40 mm dia |
| 24 | Providing and fixing brass ferrule with C.I. cover conforming to IS : 2692 including boring and tapping the main as per CPWD specification and direction of the Engineer - in - charge. i) 10 mm nominal bore |
| 25 | Providing and fixing G.I. EqualTee in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.i) 15 x 15 x 15mm dia |
| 26 | ii) 20 x 20 x20 mm dia |
| 27 | iv) 40 x 40 x 40 mm dia |
| 28 | Providing and fixing G.I. UnEqualTee in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. i) 40 x 40 x 15mm dia |
| 29 | ii) 40 x 40 x20 mm dia |
| 30 | iv) 20 x 20 x 15 mm dia |
| 31 | Providing and fixing of GI Union as per CPWD specification and direction of the Engineer-in-charge.i) 15 mm dia |
| 32 | Providing and fixing G.I. socket as per CPWD specification and direction of the Engieer-in-charge. i) 15 mm dia |
| 33 | Providing and fixing G.I Bend /elbow in the pipe line including testing of joints complete as per CPWD Specification and direction of Engineer -in-charge.i) 15 mm dia |
| 34 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. i)20 x 15 mm dia |
| 35 | 40 x 15 mm dia |
| 36 | 40 x 20 mm dia |
| 37 | 50 x 40 mm dia |
| 38 | Providing and fitting fixing PVC / plastic bib cock conforming to IS : 9763 in hydrant points at different location as per specification & direction of the Engineer-in-charge. (i) 15 mm dia PVC /plastic bib cock |
| 39 | Providing and fixing G.I. Nipple of medium class as per CPWD specification and direction of the Engineer - in - charge. ii. 15 mm dia 150 mm long |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
AI Tender Summary
Tender Timeline
Mar 04, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender