Fire Service Department has published Fabrication Of Advance Water Tender With Fire Fighting/Rescue Equipments And Accessories Fabrication Of Advance Water Tender With Fire Fighting/Rescue Equipments And Accessories. Submission Date for this Tender is 14-03-2022. Fabrication Work Tenders in shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Fabrication cost of Advance Water Tender |
| 2 | 100mm rubber suction hose in 2.5 mtrs. length with 100 mm suction hose GM couplings as per IS:3549-1983 |
| 3 | Suction strainer for 100mm suction hose- brass as per IS: 907-1984 or latest. |
| 4 | Dividing breaching with control 63mm instantaneous pattern-GM as per IS:5131:2002 or latest. |
| 5 | Collecting breaching 63mm instantaneous pattern-GM as per IS:905:1980 or latest. |
| 6 | Suction wrenches for 100mmsuction hose couplings as per IS: 4643-1984 or latest. |
| 7 | Combined key for hydrant cover and lower valve as per IS:910:1980 or latest. |
| 8 | Torch electric with 4 cell water proof |
| 9 | Foam branch –FB5X type with pick up tube, GM as per IS:2097:1983 or latest. |
| 10 | Rope Karamental/BOB16mm dia for lowering line of 50 mtr long with sealed ends |
| 11 | Rope Karamental/BOB14mm dia for guy line of 40 mtr long with sealed ends |
| 12 | Rope Karamental/BOB12mm dia for long line of 30mtr long with sealed ends |
| 13 | Rope Karamental/BOB10 mm dia for short line of 20 mtr long with sealed end |
| 14 | Rubber gloves as per IS 4770-1991 for5000 Volts |
| 15 | Canvas gloves with anti skid palm |
| 16 | Axe large as per IS:963:1963 or latest. |
| 17 | Pick axe as per IS:703:1968 or latest. |
| 18 | Firemen Axe as per IS:926 or latest. |
| 19 | Spade with wooden handle. |
| 20 | Crow bar of 6ft long 25mm dia as per IS:704:1968 or latest. |
| 21 | Crow bar of 4ft long 25mm dia as per IS:704:1968 or latest. |
| 22 | Spanner adjustable,30cm long |
| 23 | Jack Hydraulic for 20 ton capacity with handle |
| 24 | Oil feeder standard capacity |
| 25 | Funnel 300mm dia made from GI 18SWG sheet |
| 26 | Hammer sledge with wooden handle -10 kg |
| 27 | Suction collecting head -100mm suction inlet, GM 3 way as per IS-904:1983 or latest. |
| 28 | Adopter Double Female instantaneous 63mmGM |
| 29 | Adopter Double Male instantaneous 63mmGM |
| 30 | Tool kit (fixed spanners, ring spanner, screw drivers & Plier insulated) |
| 31 | Belt hook |
| 32 | Selectable flow nozzle, made of aluminum alloy (hard anodized), light weight and easy handling having 63mm size male instantaneous inlet. Nozzle shall have rubber moulded bumper and pistol grip handle, ball valve with shut off handle. Selectable flow capacity, nozzle flow rates setting of approx. 200-250-350-475-600 lpm at 7kg/cm2with good range hollow jet, and dense fog in spray position as per NFPA or EN standard. |
| 33 | Branch pipe (Standard/Short Branch) GM 63mm male inlet as per IS:903:1993 or latest. with ¾” Nozzle. |
| 34 | Cap Hydrant spindle |
| 35 | Bolt cutter – 600mm long - |
| 36 | Hook ceiling (preventer) with 3mtr. long wooden handle |
| 37 | Knife salvage |
| 38 | Tyre lever |
| 39 | Plier cutting |
| 40 | Petrol driven Carbide chain saw machine (wooden cutter) 2HP 18 inch minimum, 600mm guide bar length, with spare chain IS standard. (Husqvarna/Stihl or equivalent ) |
| 41 | Petrol driven Rotary Rescue saw machine (concrete cutter) 6.4HP 94CC with Diamond Tipped Blade and complete accessories. (Husqvarna/Stihl or equivalent ) |
| 42 | Hose ramp (rubber) as per IS standard 20 ton capacity suitable for 2 lines |
| 43 | Saw carpenter – 300mm |
| 44 | Shovel with handle |
| 45 | Chisel cold |
| 46 | Hose clamp as per IS |
| 47 | Hammer ball pein-500 gms |
| 48 | Revolving head nozzle as per IS |
| 49 | Universalnozzle as per IS |
| 50 | Nozzle spanner as per IS |
| 51 | Fire Proximity Suit (Nomex 3 layer) as per EN/NFPA |
| 52 | B.A Set with spare cylinder of carbon composite as per EN 137-2006 or latest with Tool kit. |
| 53 | Delivery hose 63mm dia confirming to IS 636– 1988 “Type B” or latest. in 30 Mtrs length with GM male and female couplings. The hose and the couplings should be ISI marked |
| 54 | Delivery hose 63mm dia confirming to IS 636– 1988 “Type B” or latest. in 15 Mtrs length with GM male and female couplings. The hose and the couplings should be ISI marked |
| 55 | Stretcher ( Two fold) |
| 56 | First Aid Box for 10 persons |
| 57 | Rubber washer 63 mm for delivery hoses |
| 58 | Portable Fire Pump capacity 275 LPM at thepressure of 4Kg/Cm2 as perIS: 942-1982 or latest with complete accessories i.e. suction hose, suction wrenches, suction strainer and basket strainer etc. Other features:-self start engine, total weight of pump should not be more than 50 kg. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
