Padmanabhapuram Municipality Construction Of Public Toilet Atmunicipal Office Permises Padmanabhapuram Municipality Construction Of Public Toilet Atmunicipal Office Permises
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Mar 2022
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
padmanabhapuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Padmanabhapuram Municipality Construction Of Public Toilet Atmunicipal Office Permises Padmanabhapuram Municipality Construction Of Public Toilet Atmunicipal Office Permises
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Public toilet |
| 2 | Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rockinclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15 cm thick well rammed and consolidated and depositing the surplus earth within the compound etc.,complete as per std specifications SS 20B. |
| 3 | Plain cement concrete in 1:4:8[one cement , four fine sand andEight aggregate ] using40 mm size ISS grade machine crushed chips including the cost of mixing laying curing etc., complete complying with standard specification |
| 4 | Supplying and erecting steel centering for sides and soffits of RCC slabs of plane surface inculding strutting upto 3.29 m height with all cross bracings using mild steelsheets of size 90cm X 60cm and 10 BGstiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and as directed by the departmental officers(Payment for centering shall be given after the concrete is laid) - beam |
| 5 | Slab |
| 6 | Column |
| 7 | Providing and laying in position,Standardised Concrete Mix M-20 Grade in accordance withIS:456-2000 using 20 mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325Kg/m3 and maximum water cement ratio of o.55, including admixture(Plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate,retard setting of concrete ,improve workability without impairing strengthand durability with about (5.Cum.) 7730 Kg of 20 mm machine crushed stone jelly and with about(3.3 Cum.) 5156 Kg of 10-12 mm Machine crushed stone jelly and with about(4.79 Cum.) 7670 Kg ofM-sand,but excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing etc and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specifications and as directed by the departmental officers.The course and fine aggregates to be used should comply with the requirements of IS Standards.( No separate payment will be made by the department for the excess usage of materials.) |
| 8 | Supply , fabricating and placing in positionof R.T.S bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire and all labour charges etc. complete as per standard specifications. |
| 9 | Brick work in CM 1:5 (one cement & five sand) using III class ground moulded Country bricks of size 8.75\"X41/4\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 10 | Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 11 | Plastering with cm 1:5mix (one cement and five Fine sand) of 12mm thick, the rate including cost of all materials and all labour charges etc. complete as per standard specifications. |
| 12 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 13 | Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 14 | Painting two coats with approved Plastic Emulsion paint over a priming coat including thorough scrapping clean removal of dirt etccomplete and including necessary plaster of paris,putty wherever requiredetc, complete as per SS |
| 15 | Weathering Course with Concrete Broken Brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beatersfor giving required slope and thickness as directed bythe departmental officers.etc., complete |
| 16 | Finishing the top of the roof slab with one course of Machine pressed tiles of size 20cm x 20cm x 2 cm of approved quality laid in cement mortar 1:3 ( one cement and three fine sand) 20mm thick mixed with waterproofing compound 2 % by the weight of cement used and the top pointed with red oxide etc., complete complying with standard specification |
| 17 | S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in positionwith necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour |
| 18 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 19 | Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm \"P\" os \"S\"\" trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. |
| 20 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 21 | Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications. |
| 22 | Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 23 | Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in positionincluding furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification. |
| 24 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 24 |
| 25 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 36 |
| 26 | Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade on 7/20GI bearer wire for service connection mains SD 64 |
| 27 | Supply and run of 2 X 1.5 sq.mm(22 / 0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade in 25 mm dia GI pipe( Class \" B \" ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69 |
| 28 | Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD EarthingSD 141 |
| 29 | Supply and fixing of single box type 4\"-40Wflourescent tube fitting with copper choke and condenser with TWround block on wall or ceiling with flourescent tube with PVC unsheathedcopper leads from terminals to the fitting ofTube Light [SD88] |
AI Tender Summary
Tender Timeline
Mar 03, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender