Supply, Installation And Commissioning Of Fence Energiser Testing Arrangement ( Digital Oscilloscope, High Voltage Probe, Digital Multi Function Fence Voltmeter And Standard Resistors ) , Supply Of Fence Energiser Testing Arrangement , Digital Osci, Thiruvananthapuram-Kerala

Supply, Installation And Commissioning Of Fence Energiser Testing Arrangement ( Digital Oscilloscope, High Voltage Probe, Digital Multi Function Fence Voltmeter And Standard Resistors ) , Supply Of Fence Energiser Testing Arrangement , Digital Oscilloscope Suitable For Testing Power Fence Energiser With Following Specifications. Band Width : 70 Mhz , Channels 2 : Sample Rate On Each Channel : 500 Ms / S ; 1 Gs / S, Record Length 2.5 K Points.At All Time Bases. Vertical System - Analog Channel Vertical Resolution - 8 Bits ( Minimum ) Input Sensitivity Range - 2 Mv To 5 V / Div Dc Gain Accuracy: + 3 % From 10 Mv / Div To 5V / Div ( Minimum ) Maximum Input Range Voltage : 300 Vrms Cat = Ii Minimum 7 Inch Wvga ( 800X480 ) Active Tft Colour Display At Least 34 Automated Measurements Dual Window Fft, Simultaneously Monitors Both The Time And Frequency Domains Built-In Waveform Limit And Trendplot Testing Dual Channel Frequency Counter Zoom Function Automated, Extended Data Logging Feature Autoset And Auto-Ranging Functions Input Voltagerange50 Hz, 100- 270Volts Ac , High Voltage Probecompatible For Connecting Osciloscope With The Following Specification Channel : Min 2 : Frequency 50 Mhz To 100 Mhz Supported Voltage : 15 Kv Ac / Dc ( Minimum ) , Digital Multi Function Fence Voltmeter With Following Specifications. Measuring Voltage Range ……………..0 V To 15 Kv Accuracy………….. ………… ….…. 2% + / - Measuring Output Energy ---………. 16 Joules On 500 Ohms Resistive Load Output Wave Form.. Capable To Measure High Voltage Impulse Shape Up To Peak Volts 15 Kv Measuring Output Current ………. Up To 7 A Measuring Through Resistive Load Current Direction …………………… .. Lcd Cursor Indication Operating Voltage ……………………9Vdc Display ………………….… Lcd Display , 128X 64 Pixels ( Minimum ) , Graphic Display Memory ………………………. 512 Kb Bit ( Minimum ) Operation ……………………..…..…… Fully Automatic User Controls ……………………… …. Right Left And Up Down Electronic Navigation Keysenclosure …H.T Proof Ip 65 , Abs Plastic Hand Held Operating Temperature….. -5 To + 50 Degree Celsius , 500Ohm Standard Resistors With Following Specifications. Wattage Rating :30Watts Casing : Moulded With Epoxy Voltagewithstandingcapability :20Kv ( Minimum ) , 1000Ohmstandard Resistors With Following Specifications. Wattage Rating :30Watts Casing : Moulded With Epoxy Voltagewithstandingcapability :20Kv ( Minimum )

INR 2500 /-

INR 30000.0 /-

Refer document

Name of Work: Supply of Fence Energizer Testing Arrangement (Digital Oscilloscope, High Voltage Probe, Digital Multi Function Fence Voltmeter and Standard Resistors)

Sl. No.	Item Description
1	Supply of Fence Energiser Testing Arrangement
2	Digital oscilloscope suitable for testing power fence energiser with following specifications. Band width : 70 MHz , Channels 2 : Sample rate on each channel : 500 mS/S ; 1 GS/S,Record length 2.5 k points.at all time bases. Vertical system - Analog channel Vertical resolution - 8 Bits (Minimum) Input sensitivity range - 2 mV to 5 V/Div DC gain accuracy: + 3 % from 10 mV/Div to 5V/Div (Minimum) Maximum input range voltage : 300 Vrms Cat = II Minimum 7 inch WVGA ( 800x480) Active TFT colour display At least 34 automated measurements Dual window FFT, simultaneously monitors both the time and frequency domains Built-in waveform limit and TrendPlot testing Dual channel frequency counter Zoom Function Automated, extended data logging feature Autoset and auto-ranging functions Input VoltageRange50 Hz, 100- 270Volts AC
3	High voltage probecompatible for connecting osciloscope with the following specification Channel : Min 2 : Frequency 50 MHz to 100 MHz Supported voltage : 15 kV AC/DC (Minimum)
4	Digital multi function fence Voltmeter with following specifications. Measuring Voltage range ……………..0 V to 15 KV Accuracy………….. ………… ….…. 2% +/- Measuring Output Energy ---………. 16 joules on 500 ohms resistive load Output Wave form.. Capable to measure high voltage impulse shape Up to peak volts 15 kV Measuring Output current ………. Up to 7 A Measuring through resistive load Current direction …………………… .. LCD Cursor indication Operating voltage ……………………9VDC Display ………………….… LCD Display , 128X 64 pixels(Minimum), Graphic display Memory ………………………. 512 KB bit (Minimum) Operation ……………………..…..…… Fully Automatic User controls ……………………… …. Right left and Up down Electronic navigation keysEnclosure …H.T proof IP 65 ,ABS Plastic Hand held Operating temperature….. -5 to + 50 degree Celsius
5	500Ohm Standard Resistors with following specifications. Wattage Rating :30Watts Casing : Moulded with epoxy Voltagewithstandingcapability :20kV (Minimum)
6	1000OhmStandard Resistors with following specifications. Wattage Rating :30Watts Casing : Moulded with epoxy Voltagewithstandingcapability :20kV (Minimum)