|
| 1 | Labour for boring tube well of required dia by Water jet system through any type of soil strata including Hire & Labour charges For boring pipes, strainers,blind pipes etc.& fitting & fixing the same Complete including bucket washing & other incidental Works in the connection. The tubewell should have a min. 50 mm gap inbetween the outside of the tubewell pipe And the bore. |
| 2 | Packing the annular space between the outside of theTubewell pipes & strainers and the bore with pea size Washed gravel of or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete. |
| 3 | Washing and developing tube well with air compressor pump and engine for (eight) hours compressor pumping per day with necessary arrangements for testing |
| 4 | Supplying, fitting & fixing Steel Cutter Piece up to 450mm long with socket 80mm dia |
| 5 | 80 mm DiaPVC Threaded pipes IMade to ASTM-D-1785 to match G.I. pipes as per I.S.1239(Part-1) of schedule 40 |
| 6 | Cutting Slot for striner on PVC Threaded pipes Made to ASTM-D-1785 to match G.I pipes as per I.S1239(Part-1) of schedule 40 |
| 7 | 32 mm diaPipe ‘ASHIRBAD’ make standered type threaded PVC column pipe Schedule-80 ( White in colour ) for 415 V Submersible. |
| 8 | 1.00 H.P Single phase\"Texmo\"/ \"CRI\"/KSB/CROMPTON GREEVSBrand submersible pump with motor 1.10 K.W / 6-9 Stage / 50 mm del size / H.R (m) - 56-33. |
| 9 | Control Panel board (ISI brand) complete with statar & Main switch for 1.0 H.P Submersible pump with mortor. |
| 10 | 1.50 Sqmm3 core CRI /Finolex/Havels/any ISI brand flat cable (1100 V) |
| 11 | 32 mm dia Male /Female abopter(M.S/G.I) for Top & bottom of column pipe. |
| 12 | 80 mm dia M.S/G.I Clamp with necessary nut bolt(heavy duty) |
| 13 | 32 mm dia M.S/G.I Clamp with necessary nut bolt(heavy duty) |
| 14 | 80 mm dia (M.S/G.I)Top cap (Heavy duty) |
| 15 | 32 mm dia G.I short piece of non TATA make (up to 150mm long) |
| 16 | 32 mm dia G.I. bend. |
| 17 | Fitting and fixing of submersible pump & main switch, control panel board and earth connection etc. complete with necessary fittings. |
| 18 | Labour for fitting and fixing high density ploy-etheline pipes or P.V.C pipes for above ground works including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making thread, cutting holes in walls or R.C floor where necessary and mending good all |
| 19 | (a) Earthwork in excavation in foundation trenches or drain or septic tank soak well etc. in all sorts of soil (including mixed soil but excluding moorum & laterite or sand stone ) |
| 20 | (b)Filling in foundation or plinth by Fine Sand in layer not exceeding 150mm as directed an consolidation same by through saturation with water ramming complete including the cost. |
| 21 | (c)Single Layer Brick Flat Soling with 1st class picked jhama bricks in foundation & plinth. |
| 22 | (d)Ordinary Cement Concrete (Mix-1:2:4) with graded stone chips (20 mm normal size) excluding suttering and reinforcement |
| 23 | (e) 125 mm Th Brick work in cement morter1:4 with first class brick in foundation & plinth. |
| 24 | (f) 20 mm th. outside Sand Cement plaster with cement morter (1:6) in G.F. |
| 25 | (g)Neat cement punning about 1.5 mm thick in wall ,dado,window sill, floor etc. |
| 26 | 32mm dia PVC Pipe Sch-40 |
| 27 | 15 mm dia (1/2\"\")schedule-80. |
| 28 | Suppling ,fitting,fixing push cock of heavy quality and approved make and brand. |
| 29 | Supply of High Density Poly-ethylene Pipe confofming to IS-4984-1985(Dia)(PE-63) |
| 30 | Sand filling in the trenches in layer not exceeding 15cm. As directed and consolidating same by through saturation with water ramming complete including the cost of supply |
| 31 | Providing & fixing Concrete Sign Board as per IRC |
