Provision Of Security Light Inthe Campus Of Central Training Centre And Rural Development Office At Hehal, Ranchi.
Tender Value
19.27 Lakhs
Estimated cost
Bid Submission
05 Mar 2022
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Security Light Inthe Campus Of Central Training Centre And Rural Development Office At Hehal, Ranchi.
BOQ
| Sl. No. | Item Description |
| 1 | S/F/F swaged steel tubular pole (410SP-2) of height 7 mtr confirming to IS:2713 (part II) in the three section with steel base size, bottom of the pole made of 50 mm dia MSB clamp pipe welded to 300 mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one coat steel primer and two coat of red -oxide all complete etc as required (without arm) |
| 2 | 1 mtr long single arm |
| 3 | 1x2 mtr long double arm |
| 4 | Erection of metallic street light standard pole of length exceeding 6.5 metres but not exceeding 8.5 metres in cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation with cement concrete collar of size 0.4 m dia x 0.5 m height to accommodate the looping type cable end box including excavation and refilling etc. as required. ( for security light |
| 5 | S.I.T.C of floowing rating LED Street lighting luminariewith pressure die cast housing and toughenedglass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required |
| 6 | 90/100W LED Street light |
| 7 | Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in existing surface / recessed steel / PVC conduit including dismantling as required |
| 8 | 1.15.3 3 x 1.5sq.mm |
| 9 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 10 | 2.8.12 way, Single door |
| 11 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 12 | 2.14.263 amps |
| 13 | Supply of XLPE insulated sheathed (Heavy duty) armoured electric cable with aluminium conductor for working voltage 1100 volts to IS:7098 (part I ) IS:1554a 2 core 6 sq mm |
| 14 | 2x10 sq mm (secrity light) |
| 15 | 16 sq. mm, 4 core |
| 16 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm directr in ground including excavation, and refilling the trench etc as rquired, but excluding sand cushioning and protective covering. |
| 17 | Supplying and making and termination with aluminiumgs lugs for following size of PVC insulated and PVC shetherd/XLPE aluminium conductor cable of 1.1 KV grade as required a 2 core 10 sq mm |
| 18 | b 4 core 16 sq mm |
| 19 | S/F 25 mm dia med class G.I Pipe for laying of cable in road cresing |
| 20 | S/F suitable size water proof sintex make distribution junction box with 1 nos 6 amp MCB well mounted on pole above 2.5 feet from ground level all complete with nut bolt etc as reqd. |
| 21 | Earthing with G. I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as reqd. |
| 22 | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. |
| 23 | Fabrication and installation of Outdoor feeder pillar panel with following accessories made of 16 SWG M.S Sheet painted with one coat steel primer and two coat power spray painting with approved shade making pCC Plinth and foundation including fitting/Fixeng/ connection & transportation up to work site labour charge etc all complete.25/100 amps 4 pole MCCB 10 KA, fixed thermal setting = 1 Nos63 amps , 2 pole isolator = 6 nos25 mmx 5 mm copper strips (1.15 mtr/KG) = 6 kgindictor lamp = 6 Nos.6 sq mm ISI marked PVC insulated copper conductor cable = 12 mtr |
| 24 | C.G.S.T @ 6% |
| 25 | S.G.S.T @ 6% |
| 26 | Labour Cess @ 1% |
AI Tender Summary
Tender Timeline
Feb 28, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender