Additional Work In Head Office For Home Guard In Vidhyadhar Nagar, Jaipur and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South Zed Black Above 3601 Cm2 Slabs 2 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) Above 3601 Cm2 Slabs 3 Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone WorkFull Edge moulding 4 Providing non slip grooves to granite/ kota stone flooring, counters, vanities etc. using groove cutter V type including machine polishing to groove to give high gloss finish etc. complete as per design approved by engineer in charge 5 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 6 Providing and fixing tiled false ceiling of approved materials of size 595X595 mm in truehorizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams per sqm both side inclusive ) consisting of maIn “T” runner with suitably spaced joints to get required length and of size 24X38 mm made from 0.30 mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24X25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mmcenterto center to form a grid of 1200X600 mm and secondary cross “T” of length 600 mm and size 24X25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200X600 mm panel to form grids of 600X600 mm and wall angle of size 24X24X0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 X 37 X 25 X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanizedbutterfly level clips of size 85 X 30 X 0.8 mm spaced at 1200 mm center to centeralong main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595mm and 0.5 mm thick with 8 mm drop made of GI Sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece. 7 Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 8 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) 9 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 12mm thick . 10 Providing & applying one coat of UV resistant polymer cement based waterproofing slurry coating of approved make and quality on concrete or plastered surface as perspecifications including preparation of surface by cleaning brushing and dust removing, filling of cracks and making the surface leak proof by mixing one part of chemicalwith 2 parts of cement and 2 parts of water (covering area 1.86 Sq.M/Kg of chemical) including cost of cement, labour, tools & plant, scaffolding if necessary etc., complete as directed by Engineer in Charge.Note: Undulations/cracks found on the surface should be rectified with Cement Motor before application and the same will be paid under relavent items. 11 Providing& fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Nigeria teakwood Grade - I. 12 Supplying and fixing wood work in frames of wall panelling, false ceiling partition wall etc. as per approved design and drawing including antitermite treatment.Chir wood Grade - I. 13 Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using :ISI 9 mm teak ply one side BWR 14 Providing and applyingMelamine polish on teak wood work of approved brand and manufacture to give an even shade with twoor more coats by compressor including sand papering,wood filler coat etc complete in all respect:New Surface 15 Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails completeas per approved by engineer in charge.0.8mm thick mica 16 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 17 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A:30 mm thick .Decorative teakveneer One side 18 Providing and fixing S.S. Rod 30mm dia (304 grade ,16SWG) includingbrackets fixed with C.P. brass screws and rawl plugs, etc., wherever necessary complete two side central all fittings. 19 Spray painting in approved shade and approved qualitywith Duco paint of required colour to give even shade with two or more coats by compressor including sand papering, NC putty filler coat etc complete in all respect as per design given by Engineeer incharge on new work. 20 Providing and fixing Hollow core partition wall using 50x30 mm Chir wood frame 600 mm c/c on both directions,door opening as per drawing with steel fittings antitermite treatment complete as per specifications using :ISI 4 mm thick commercial ply with 0.80 mm mica with adhesive onboth sides. 21 Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make. Front side finishing with 4mm thick teak veneer approved make and 0.8mm thickapproved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS Hanger Rod 20mm dia)complete with melamine polishing as per drawing and design approved by Engineer in Charge. 22 ProvidingandfixingNigeria/Ghana /Ivory Coast Teakwood grade-I mouldings and beadings in doors and windows size :- 23 50x12 mm 24 50x20 mm 25 25x12 mm 26 25x20 mm 27 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal outer dia pipes 28 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :20mm nominal bore.Horizontal 29 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make75 mm dia 30 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 31 Coupler75mm dia 32 Bend 87.5 Dg.75mm dia 33 Providing and fixing sun control film, thickness of film 1 Mil Visible Light Transmittance 4-24% & Solar Energy Transmittance 42-51% & Total solar Energy rejection 37-43%of approved colour and shade , complete in all respect , at all level , as directed by engineer- in -charge. 34 Providinganderectingdirectionandplace identification retro-reflectorised sign asper IRC:67 madeofencapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 2 mm thickwith areaexceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos.firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mmbelowgroundlevelasperapproveddrawing and MoRTH Specification Clause 801 35 NON BSR ITEMS 36 Providing and fixing tuffened glass panels of ASAHI, Saint Gobain or any other equvialent make in straight position witch shall have 12 mm thickness and clear in appearance.This item includes all hardware fixtures like DORMA- magnet/PAG magnet No. 1417 or any other equivalent make for floor, beam, and ceiling fitting to hold the glass in required stable position.The glass shall be sealed by 5 mm D profile white seal made from cellular EPDM running through the entire profile length. 37 Providing and fixing 900mm high 12mm thicktoughened glass railing using S.S.304 Grade Stainless steel stotted pipe 50mm (miniumum 4 mm thick) at top including fabricating ,fixtures, errecting , necessary SS screw,bolt, welding , grinding , finishing, buffing to stainless steel section etc. complete asper direction of engineer charge.Work also include cost of design work on glass approved by the client. 38 Supply & fixing of Automatic Power Operated Sensor Sliding Door Opening size 4900x3200 mm(Door Size: 2000mm X 2400mm)Remaining part from door opening (sides of the door) shall be fixed with 12mm thick toughened glass.Door shall be complete with 12mm thick frameless toughenedclear glass leaf with all hardware and miscellaneous equipment. Power connection and cabling: Conceal within the Door head unit cover. Include operator, header with roller track, carrier assemblies, framing jambs, sliding door panel(s), activation, safety devices and accessories required for complete installation.Accessories:• Center Lock Housings• Vertical Stiles• Floating Header Bars• Door Patches• Channels and Header Bars• 12mm thick frameless toughened clear glass leaf etc.work is deemed to be completed after sucessfully demonstration to the client department. 39 Supply&InstallationofCombinationfloor/dado(ItalianMarbleBotticinoandBlack/Nero Marquina)1. The best quality Pre-polished Italian marble stone from approved quarry shall be machine cut and machine polished as specified in respective items and shall be of specified thickness and of approved quality and size, free from cracks and flakes and shall be uniform colour, with straight edges. The sides of machine cut, and machine polished stones shall have perfect right angles and surface smooth. The stone slabs shall be laid and finished on bedding of cement mortar 1:4 (1 cement: 4 coarse sand) 20 mm (average) thickness.2. The flooring work will be inclusive of 100mm high skirting which shall be flushed with the wall & with a 5mm high groove above it.3. The Italian marble skirting to be laid on min 20mm thick cement mortar of ratio 1:3 (1 cement: 3 coarse sand) and joined with white cement slurry mixed with matching colour.4. The finished stone surface thus laid to the required degree as approved by the Engineer in charge.5. White cement slurry should be used under slab. 40 P&F wall mounted curved shaped urinal partition with toughened glass and frosted both sides chrome finish of approved brand & size 900x450 mm with requisite hardware fitting (Dorma, Ozone or equvalent) completed in all respect with filling ofsilicon where necessary as per instruction of Engineer in charge. 41 Providing & fixing plastic film on glass of Garware make or equivlentfor glass door, windows etc. complete as per design and instruction of Engineer in charge 42 Providing & fixing Sliding cum Folding MS door for campus main gate as per approve design using hollow pipe ,angle ,channel section,flats(ISI Marked) etc.including all necessary hinges,roller , cutting welding,bolting, wastage complete as per instruction of Engineer in charge 43 Providing and fixing of LED strips of approved make and color with proper driver of required capacity for proper illumination of the LED strip. The strip to be fixed in the coves/ glass etc in proper line and level complete and backing of 3M tape complete including connecting to the electrical point etc complete. 44 Flaming treatment of granite for entrance using LPG gas and make the granite antiskid type complete on site as per complete satisfaction of the Engineer in charge 45 Providing and Fixing Roman fabric blind with manual folding mechanism,fixed on aluminium valcro fixed roman channelhaving width 32mm and weigt 284 gram per meter ,fixed on steel brackets of appropriate size ,9mm dia roman aluminium pipe at 200 mm spacing with nylon thread ,fixed at window level and curtain lift with pvc bead rope, design and colour as per instruction by engeer-in-charge with necessary hardware fitting, material and labour etc. complete. (Vista or equivalent) The rate shall include all materials, hardware and lobour etc. complete as per instruction of engineer-in-charge and consultant. 46 Providing and Fixing Roller Blind curtain fixed at window level and curtain lift with pvc bead rope, design and colour as per instruction by engeer-in-charge with necessary hardware fitting, material and labour etc. complete. (Vista or equivalent) The rate shall include all materials, hardware and lobour etc. complete as per instruction of engineer-in-charge and consultant. 47 Supply & Fixing fabric curtain (Approx cost Rs. 700/-to 800/- P. Sqm) of superior quality and approved design. The curtain should be superior quality stitching duly backed by blackout lining cloth in approved colour design and as per sample approved.Brand D-decor or equivalent 48 Supply & Fixing Sheer curtainof superior quality and approved design. ( polyester & viscose mix,GSM 115,width 56 inch) Brand D-decor or equivalent 49 Reception table(size 8x3.5x3.75) as per drawingReception Counter with Pedestal Storage Cabinet &Side Storage Cabinet : Providing and placing Reception counter Counter ofrequired size with 01 nos. of movable Pedestal Storage Cabinet and 01 no. of Side Storage Cabinet.Reception Counter : Reception counter shall havewriting height countertop at 750mm height and a raised counter top of 230mm depth at 1050mm heightmade up of 36 mm thick ISI mark BWP Plywood. Top thickness 36mm thick plywoodfinished with 36mmx18mm teak wood lipping. Side panels 18mm thick made ofplywood finished with 18mm teak wood lipping. All exposed surface finished with 1mm thick laminate and non-exposed surface to be finished with 0.8mm thick laminate of approved shade and brand. Teak wood lipping to be finished with melamine polish. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.fron part shall be venner finish as per drawing with LED strip light.Pedestal Storage Cabinet : Providing and placing Pedestal Storage Cabinet of size 450Lx450Dx700H mm with 03 Drawers made up of 18mm thick ISI mark BWP Plywood. Top/Base/Sides made of 18mm thick plywood finished with 18mmx10mm teak wood lipping. Drawer front/side/back made with 18mm thick plywood & drawer base in 9mm thick plywood. Drawers with 14” telescopic channels of approved brand, Handles in antique finish 130mm & locks of approved brand to be provided. All exposed surface finished with 1mm thick laminate and non-exposed surface to be finished with 0.8mm thick laminate of approved shade and brand. Teak wood lipping to be finished with melamine polish. Side Storage Cabinet : Providing and placing Storage Cabinet of size 1050Lx450Dx750H mm made up of 18mm thick ISI mark BWP Plywood. Top & Sides made of 18mm thick plywood finished with 40mmx18mm teak wood lipping.Cabinet Base /Shelf / Vertical Partition / Shutter made with 18mm thick plywood finished with 18mmx10mm teak wood lipping. Cabinet back made with 9mm thick plywood. All exposed surface finished with 1mm thick laminate and non-exposed surface to be finished with 0.8mm thick laminate of approved shade and brand. Teak wood lipping to be finished with melamine polish. S.S. Hinges (75x12x30mm), Locks, magnet catcher, Handles in antique finish(150mm) & Tower Bolt (75mm)of approved brand to be provided.The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details. 50 Providing & Fixing Door Accessories with superior quality make 51 (a). jainson handle lockgloria rose with big body 3 key handle lock 52 (b). knob lockGodrej knob lock ultrA KEY with stainless steel finished 53 (c). door closerGodrej Hydraulic door closerwith stainless steel finished
