1. Minor Repairing Of Pump Houses At Uwss Nathdwara.
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
10 Mar 2022
0 days left
EMD
9500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nathdwara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
1. Minor Repairing Of Pump Houses At Uwss Nathdwara.
BOQ
| Sl. No. | Item Description |
| 1 | Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 25 mm thick. |
| 2 | Random Rubble stone masonry for Foundation & Plinth level in Cement Sand mortar above 30 cm. thick walls in : Cement Mortar 1 : 6 (1-Cement : 6-Sand). |
| 3 | Random Rubble stone masonry for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement Mortar 1 : 6 (1-Cement : 6-Sand). |
| 4 | Stainless steel wire mesh of average width of aperture 1.56mm and nominal dia. of wire 0.45 mm |
| 5 | Repairtocementplasterincementmortar 1 : 6 (1 cement : 6 fine sand) including removal of old plaster in regular shape and white or colour washing. |
| 6 | Repairtostonemasonryincementsandmortar 1 : 6 with old and new stones. |
| 7 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 8 | M25 grade Design Mix |
| 9 | M20 grade Nominal Mix (with graded stone aggregate 20mm nominal size). |
| 10 | M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size). |
| 11 | M10 grade Nominal Mix (with graded stone aggregate 20mm nominal size). |
| 12 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. |
| 13 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Hot rolled deformed bars (IS : 1139). |
| 14 | Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height.In flats, tees, angles and channels. |
| 15 | Providing corrugated G.S. sheet roofing including vertical/ curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8 mmdiameter with bitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coat of approved steelprimer and two coats of approved paint on overlapping of sheetscomplete upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required. |
| 16 | 1.00mm thick with zinc coating not less than 275gm/m² |
| 17 | Repair to damaged RCC slabs, beams and columns etc for strengtheing with cement mortar 1 : 3 in following steps i) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.ii) Applying Epoxy primer on the exposed steel bars.iii) Applying Epoxy hardener and resin mix (as per manufectured\"s specification) on concrete and steel bars with brush.iv)Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.vi) Cure the plastered surface for 15 days |
| 18 | Providing, fabricating and erecting hand railing for walkway, topdome slab, balconey,staircase and landing consist of two rows ( oneat top and other at middle level) of 20 mm GI pipe class-B and 900mm high vertical angle 65X65X6 mm at spacing 1.50 m c/cincluding welding, threading, applying a priming coat of approvedsteel primer and embedding in cement concrete floor complete in allrespect as per specification and the direction of the Engineer. |
| 19 | Supply, fabricating & fixing of anodised (20 to 25 micron) Aluminumladder of 450mm wide with 2 nos rectangular section of 65 x 35 mm(3 mm thick) as vertical post and 25 mm bars steps at 300 mm c/ccomplete in all respect as per the specification and the direction ofthe Engineer. |
| 20 | Applying one coat of cement primer of approved brand and manufacture on wall surface including all scaffolding, (new surface) : |
| 21 | Applying Birla / JK white cement based putty over cement plaster surface for making even surface. |
| 22 | Finishing Walls With Acrylic Smooth Exterior paint of required shade including all scaffolding. New work( Two or more coat applied @ 1.67ltr/10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm) |
| 23 | Painting (two or more coats) on rain water soil, waste and vent pipes and fitting with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work : |
| 24 | 50mm dia. Pipes. |
| 25 | 75mm dia. Pipes. |
| 26 | 100mm dia. Pipes |
| 27 | 150mm dia. Pipes. |
| 28 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soil |
| 29 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .: |
| 30 | Ordinary rock |
| 31 | Hard rock (requiring blasting) |
| 32 | Brick Work With F.P.S. bricks of class Designation 75 in superstracture Above Plint Level upto floor V Level in all shapes and size in |
| 33 | Cement Mortar 1 : 4 (1-Cement : 4-Sand). |
| 34 | Providing and applying 2 coats of water based cement paint tounplastered concrete surface at all level after cleaning the surface ofdirt, dust, oil, grease, efflorescence and applying paint @ of 1 litrefor 2 sqm including all material, labour, scaffolding complete as perclause 800 of MoRT&H specifications including all material, labourscaffolding etc. |
| 35 | Kota stone slab flooring 25mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed withpigment to match the shade of the slab including rubbing andpolishing complete with base of cement mortar 1 : 4 (1 cement : 4coarse sand) : |
| 36 | Providing and fixing anodized aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasterners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC / neoprene felt etc.; Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately). |
| 37 | For shutters of doors, windows & ventilators including providing and fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). |
| 38 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item). |
| 39 | With tinted glass panes of 5.0 mm thickness (weight not less than 13.50 kg./sqm). |
| 40 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominalsize) over 75mm bed by dry brick ballast 40mm nominal size wellrammed and consolidated and grouted with fine sand includingfinishing the top smooth. |
| 41 | Cleaning of PHED Campus (Includes Removal of garbage, Cleaning of light jungle and maintaining the area and disposal of all garbage outside Approved disposal place of Concern local bodies. |
| 42 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. |
| 43 | 100mm dia |
| 44 | 150mm dia |
| 45 | 200mm dia |
| 46 | P&F of Heavy duty capacitor start 900/1400 RPM singlephase ISI marked Exhaust fan,IS:2312 marked inexisting opening including making connections testingetc. as required. |
| 47 | 450 mm sweep(900 RPM) |
| 48 | Wiring of light point/fan point / exhaust fan point/ call bellpoint with 1.5 sq. mm FR PVC insulated unsheathedflexible copper conductor 1.1kV grade and 1.5 sq.mmFR PVC insulated unsheathed flexible earth copperconductor 1.1 kV grade (IS:694) of approved make insurface / recessed ISI marked steel conduit & it\"saccessories, round tiles,18 SWG M.S. box with earthterminal, screwless cage connectors for neutral loopingin switch board & false ceiling point, 6 A switch, 3.0mm thick phenolic laminated sheet, zinc plated / brassscrews, cup washers, bushes check nuts, makingconnections, testing etc. as required. |
| 49 | Short point (up to 3 mtr.) |
| 50 | Medium point (up to 6 mtr.) |
| 51 | Long point (up to 10 mtr..) |
| 52 | Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mmFR PVC insulated unsheathed flexible copper conductor1.1 kV grade and 1.5 sq.mm FR PVC insulatedunsheathed flexible copper earth conductor 1.1 kVgrade(IS:694) of approved make in surface / recessedISI marked steel conduit & it\"s accessories, 18 SWGM.S. box with earth terminal, screwless cage connectorsfor neutral looping in switch board & false ceiling point,6 A switch, 6 A socket, 3.0 mm thick phenolic laminatedsheet, zinc plated / brass screws, cup washers,bushes, check nuts, making connections, testing etc. asrequired. |
| 53 | On board |
| 54 | Short point (up to 3 mtr.) |
| 55 | Medium point (up to 6 mtr.) |
| 56 | Long point (up to 10 mtr..) |
| 57 | S&F following sizes of ISI marked steel conduit alongwith heavy duty accessories in surface /recessed usingsaddles, clamps, fasteners as required including cuttingthe wall and making good the same as required. |
| 58 | 20mm |
| 59 | 25mm |
| 60 | 32mm |
| 61 | 40mm |
| 62 | 50mm |
| 63 | Supplying and drawing FR PVC insulated & unsheathedflexible copper conductor ISI marked (IS:694) of 1.1 kVgrade and approved make in existing surface orrecessed conduit/casing capping including makingconnections etc. as required. |
| 64 | 1 x 1.5 sq.mm |
| 65 | 1 x 2.5 sq.mm |
| 66 | 1 x 4.0 sq.mm |
| 67 | Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load andsite requirement) 4KV impulse withstand voltage,as per PWD specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted withexisting distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A ratingincluding making connections, testing etc. as required.. OEM shall have submitNABL / CPRI / ERDA accrediated lab test reportsbefore execution & All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 68 | Single pole MCB 6 A to 32 A rating |
| 69 | Double pole MCB6 A to 32 A rating |
| 70 | Providing & Fixing of 18 SWG G. I. / M .S. Sheet boxesas per PWD specification for electrical Works, duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) in recessed/surface as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . 18 SWG M. S. Sheet boxes |
| 71 | 75mm x 75mm x 60mm |
| 72 | 100mm x 100mm x 60mm |
| 73 | 150mm x 75mm x 60mm |
| 74 | 175mm x 100mm x 60mm |
| 75 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from polycarbonate /extruded aluminium powder coatedhousing with in built driver, Power Consumption of18W/20W ,system lumen efficacy = 120 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% ,p.f.=0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. |
| 76 | OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure \"A\" attacheded with this BSR. |
| 77 | 4\" LED Tube shape fixture 18/20 W (Polycarbonate Base) |
| 78 | Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of = 120 lm/Watt ,THD < 10 % , p.f.=0.95,CRI >80 ,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. |
| 79 | OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure \"A\" attacheded with this BSR. |
| 80 | Recessed Mounting |
| 81 | 36W LED light fixture 2\"x2\" with acrylic / prismatic front cover. |
| 82 | Scraping & Removing of white wash/ distemper/algli etc. from plainplaster & surfaces gently with care to keep intact the old designs. |
| 83 | Painting new letters and figures of specified size, of any shade withfirst quality synthetic enamel paint, black or any other approvedcolour to give an even shade as per clause 801 of MoRT&HSpecification including all material, labour. |
| 84 | Hindi (Matras, Commas and the like not to be measured and paidfor. Half letters shall be counted as half). |
| 85 | English and Roman |
AI Tender Summary
Tender Timeline
Feb 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender