Construction Of Divisional Office Building At Bhoranj District Hamirpur Hp Sh Construction Of Building Portion Providing Water Supply And Sanitary Istallation Septic Tank Rain Water Harvesting Tank And Site Development I.C Boundary Wall And Solar Wat Cons
Tender Value
1.84 Crore
Estimated cost
Bid Submission
03 Mar 2022
0 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhoranj → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Divisional Office Building At Bhoranj District Hamirpur Hp Sh Construction Of Building Portion Providing Water Supply And Sanitary Istallation Septic Tank Rain Water Harvesting Tank And Site Development I.C Boundary Wall And Solar Wat Construction Of Divisional Office Building At Bhoranj District Hamirpur Hp Sh Construction Of Building Portion Providing Water Supply And Sanitary Istallation Septic Tank Rain Water Harvesting Tank And Site Development I.C Boundary Wall And Solar Wat
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.(PW-30%, JW-30%,S.B.W 40%) within all leads and lifts as per directed by the Engineer-in-Charge includingentire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, all kind of soil within all leads and lifts as per directed by the Engineer-in-Charge includingentire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. 50% soil & 50% ordinary rock as per directed by the Engineer-in-Charge includingentire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size). in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floorlevel,excluding the cost of centering, shuttering and finishing within all leads and lifts as per directed by the Engineer-in-Charge includingentire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Providing and laying cement concrete 1:6:12 (1 cement:6sand: 12grades stoned 40 mm nominal size) and curing complete excluding the cost of centering and shuttering to foundation and plinth within all leads and lifts as per directed by the Engineer-in-Charge includingentire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Poviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size.) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Poviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20mm nominal size.) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 10 | Providing and Laying damp-proof course 40mm thick with cement concrete 1:2:4 (1cement : 2 course sand): 4 graded stone aggregate 12.5mm nominal size) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 11 | Providing and applying a coat of residual petroleum bitument of grade of VG-10 of approved quality using 1.7kg. Per squareMeter on damp proof courase after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Foundation, footings, bases of columns etc. for mass concrete. |
| 15 | Suspended floors, roofs, landings, balconies and access platform. |
| 16 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 17 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 18 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 19 | Stairs, (excluding landings) except spiral-staircases. |
| 20 | Edges of slabs and breaks in floors and walls under 20 cm wide. |
| 21 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work,minimum cement content not less than 400 Kg/cubic meter as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommendedroportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 22 | All works upto Plinth Level |
| 23 | All works above Plinth Level upto all floorlevel |
| 24 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, ,minimum cement content not less than 400 Kg/cubic meter as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability All work upto Plinth Levelas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 25 | Reinforced cement concrete work in beams,suspended floors,roofs having slope up to15 degree landings,balconies,shelves chajjas,lintes bands,plain window sills, staircases and spiral stair case above plinth level upto all floor level,excluding the cost of centering,shuttering finishing and reinforcement with 1:1.5:3(1 cement : 1.5 coarse sand) excluding the cost ofcentering, shuttering, finishing and reinforcement -as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 26 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 27 | Steel reinforement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 28 | Mild steel and medium tensile steel bars |
| 29 | Above Plinth level |
| 30 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 31 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floorlevel in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 32 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level Cement mortar 1:3 (1 cement : 3 coarse sand) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 33 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level Cement mortar 1:4 (1 cement : 4 coarse sand) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 34 | Random rubble masonry with hard stone in foundationand plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 35 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 36 | Filling with brick aggregate in soak pit as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 37 | Stone filling under floorand behing retaining wall as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 38 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc, wherever necessary complete. 20mm diaas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 39 | Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete upto all floor level as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 40 | 250x10mm |
| 41 | 150x10mm |
| 42 | Providing and fixing bright finished brass hanging type floor door stopper ISI marked anodised canodic coutering not less then grade AC 10 as per IS 1868 with necessary screws, etc. complete. Twin rubber stopperas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 43 | Providing and fixing300x16mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868). Transparent or dyed to required colour or shade, with nuts and screws etc. complete.as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | P/F 65mmsize special quality chromium plated brass cup board lock with six leaves including necessary screws etc. complete.as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 45 | Providing and fixing aluminium handles, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 46 | 125mm |
| 47 | 100mm |
| 48 | P/F 100mm bright finished brass hard drawn hooks and eye as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 49 | Providing and fixing 19mm thick made of action teasa thick terramite resistant water proof commercial board box including shelves and shuteer the back side of cup board/cabinet of 8mm thick ply and cut portin of shelves shall be finished with 6mm hard board edging. the shutter from out side shall be finished with1mm thick laminated of approved shade including paino hinges and magnetic catchers with att accesories as per detail architectural drawing no 195/1 to 199/1 as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 50 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 51 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Kiln seasoned and chemically treated hollock wood as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 52 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 53 | Steel work welded in built up section/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.in grating framed guard bars, ladder, railing, bracket and similar work as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Providing and fixing(SINGLE REBATE DOOR FRAME) door frame fabricated from sections roll formed out of 1.2 mm (one point two milli Meter) thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sqm (one hundred twenty gram per squareMeter). The overall size of section should be 80x50 mm (eighty into fifty milli Meter) and 105x60 mm (one hundred five into sixty milli Meter) for shutterthe frame section cut to length and matter joint with corner bracket made of CRCA electro plated as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing ECO-5000 Series Windows fabricated from roll formed sections made of Galvanized steel colour coated / powder coated (Base steel as per 513\"D\" quality Galvanized as per IS 277 with Zinc of 120 gram/sqm( one hundred twenty gram per squareMeter) with total coated thickness of 0.60mm. Coated section should be with primer coat of epoxy primr of 5-7 micron thick finish apinted with polyster paint of 12-16 microns thick and black coated with alkyd backer of 5-7 microns, or powder coated with pure polyster powder up to 50-60 micron thick. Section for frame should be of 98x50mm, section for mullion should be of 46mmx70mm 0.58mm thickness, section for shutter frame should be of 46mmx46mmx0.58mm, section for fixed glass beed should be of 18mmx25mmx0.58mm and section for fly mesh shutter frame should be 20mm x 40mmx0.58mm. Frames and mesh shutter section 18mmx6mmx0.58mm should be cut to length and mitre joint with corner bracket made of polypropylene. Glass shutter should be mitre joint with corner bracket made of CRCA electroplated. Mullion section should be jointed with frame/mullion using nylon. Mullion cap Ethyl Propylene Diamine Monomer(EPDM) gasket should be used all arround glass in shutter between frame and glazed shutter and both sides of fixed glass. Rubber gasket should be used around fly mesh to fix mesh in mesh shutter. Each glazed shutter should be provided with MS powder coated friction hinges 1 set, High grade aluminium coated handles 1 number. Each mesh shutter should be provided with S.S. Pivot hinges 1 set. Sec-color make handle shall be provided per shutter. Window frame should be fixed to brick/concrete masonary by using nylon self-expanding caps and driving MS electroplated 80mm long screw into the caps through frames complete and carriage of material withinn all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing ECO-5000 Series Windows mesh shuter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch complete and carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | Kota Stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete up to all floor level with base of cement mortar 1:4 (1 cement : 4 coarse sand) 25mm thick as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 60 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete up to all floor level as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 61 | Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) Light shade pigment using white cementas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of Light shade pigment using white cement as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 63 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 64 | Providing and fixing 1st quality ceramic glazed floor tilesconforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade completeas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 65 | Marble stoneflooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with Makrana white second quality as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 66 | White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 67 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm)as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns using self drilling/ self tapping screws complete Flashings/ Aprons.( Upto 600 mm)as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 70 | Providing and fixing M.S B.P sheet 1.66 mm to 2mm ( One point sixty six millimeter to two millimeter)thick in eaves board/decorative facia/soffits/ceiling including cutting , fixing and welding to steel roof members and applyinga coat of red lead primer complete as per the direction of the Engineer-in-Charge (base member of steel work shall be measured and paid for separately)as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 71 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns using self drilling/ self tapping screws complete Gutter (600 mm over all girth)as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipeSS 304 grade coupling with EPDM rubber gasket as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 74 | 20 mm cement plaster mix1:6 (1 cement: 6 fine sand) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 75 | Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single tee with door 110x110x110 mmas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 77 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 78 | Bend 87.5° 110 mm bend |
| 79 | Shoe (Plain) 110 mm shoe |
| 80 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm dia as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 81 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) White face insulating board 12 mm thick as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 82 | Providing and fixing 6mm thick cement fiber board as per IS 14862 particle board ceiling of approved quality (frame work and cover fillets to be paid for separately as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 83 | Providing and fixing Garsa stone 12mm.cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 84 | 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) up to all floor level as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 85 | 6 mm cement plaster of mix: 1:3 (1 cement : 3 fine sand) up to all floor level as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 86 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 87 | Providing and fixing 110 mm dia PVC cowl as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 88 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including water thinnable priming coat with cement primer up to all floor level as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 89 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 90 | White washing with lime to give an even shade New work (three or more coats) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 91 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives (New work (Two or more coats applied @ 1.43 litre/ 10 sqm. over and includingpriming coat of exterior primer applied @ 0.90 litre/ 10 sqm as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 92 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete up to all floor level as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 93 | Painting with oil type wood presservative of approved brand and manufacture: (Old work (one or more coats) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 94 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm. Over an under coat of primer applied @ 0.75 ltr/ 10 sqm. Of approved brand and manufacture as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 95 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm square bar with a clear height of 85cm embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm size complete with a applying priming coat of red lead paint as per drawing specification and as per direction of Engineer-in-charge as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 96 | Providing and fixing 75mmx65mm with M.S. flat 40x6mm welded to the balluster rounded hand rails in straight lenth complete in hard wood hand rail as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 97 | Providing and laying water proofing treatment in sunken portion of WCS, bathroom etc. by applying cement slurry mixed with water proofing cement compound of Dr.Fixit Padfin or equivalent consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm. Mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hour. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 98 | Constructing Coursed rubble hammer dressed \"U\" shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter )in cement mortar 1:6 ( OneCement : Six approved Sand) and inside plastering with cement mortar 1:3 (OneCement:Three approved Sand) including earth work and laying 10 cm(Ten Centimatre ) cement concrete in 1:5:10 (OneCement : Fiveapproved Sand : Tengradedcrushed stone aggregate) of 40 mm (Forty milli Meters)nominal size and7.5 cm (seven Point Five Centimatre )cement concrete 1:2:4 (OneCement : Twoapproved Sand : Fourgradedcrushed stone aggregate of 20 mm (Twenty milli Meter) nominal size) and finished with afloating coat of neat cementcomplete as per standard design as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 99 | Providing and laying 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. completeas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 100 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etcas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 101 | 20 mm dia nominal bore |
| 102 | 32 mm dia nominal bore |
| 103 | 15 mm dia nominal bore |
| 104 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :. 25 to 40 mm nominal bore as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 105 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separatelyas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 106 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 107 | I)2532 (32 mm OD) pipe |
| 108 | ( ii ) 2025 (25 mm OD) pipe |
| 109 | (iii) 1620 (20 mm OD) pipe |
| 110 | (iv)1216 (16 mm OD) pipe |
| 111 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern, includingflush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mmwith internal type foot rests as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 112 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapsas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 113 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 114 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cisternas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 115 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250 as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 116 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 117 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work 40mm nominal bore) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 118 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock ofapproved quality conforming to IS standards and weighing not less than 810 gmsas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 119 | Providing and fixing15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 120 | Providing and Fixing Swan 15 mm nominal boreneck pillar tap with left hand operating knob single control CON-CHR-123BKN of Jaquar or equivalentcomplete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 121 | Providing and Fixing OPP-15001PM 15 mm nominal borePillar cockJaquar or equivalent as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 122 | Providing and Fixing 15 mm nominal boreAngular stop cock with wall flange of opel primeno. CON 150083KNStop Cock of jaquar or equavalent complete in all respect as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 123 | Providing and Fixing 15 mm nominal boreConcealed stop cock with wall flange of opel primeno. CON 083FTKStop Cock PM single control of jaquar or equavalent complete in all respect as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 124 | Providing and fixing 15 mm nominal bore C.P.Mixer for kitchen sink with casted swinging CON 309KN jaquar or equavalent complete In all respect as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 125 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 126 | Providing and fixing PTMT towel rail compete with bracketsfixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 127 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 128 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 129 | Providing and fixing25 mm nominal boregun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 130 | Providing and fixing20 mm nominal boregun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 131 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 132 | 15 mm nominal bore |
| 133 | 20 mm nominal bore |
| 134 | 32 mm nominal bore |
| 135 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 136 | Providing and fixing15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 137 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mmas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 138 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150 mm as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 139 | Providing and fixing 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 140 | Providing and fixingbend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 141 | 100 mm dia Sand cast iron S&S as per IS - 1729 |
| 142 | 75 mm dia Sand cast iron S&S as per IS - 1729 |
| 143 | Providing and fixing plain bend of required degree as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 144 | 100 mm dia Sand cast iron S&S as per IS - 1729 |
| 145 | 75 mm dia Sand cast iron S&S as per IS - 1729 |
| 146 | Providing and fixing double equal plain junction of required degree as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 147 | 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 |
| 148 | 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 |
| 149 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 150 | 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 |
| 151 | 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 |
| 152 | Providing & fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 153 | 100mm dia pipe |
| 154 | 75 mm dia pipe |
| 155 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard designInside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg)With Sewer bricks conforming to IS : 4885 as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 156 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 157 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 158 | Providing and laying450 mm dia RCC pipe Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete as per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 159 | Providing and fixing solar water heating systemas per direction of Engineer- in –Charge and technical specification including entirecarriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
Feb 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender