Rate Of Different Articles ( Suitable For Coastal Area ) - 1 Repairing Offrp Finished 3D Wall Mural With Replacing The Damage Portion Having Thickness 4 To 8 Mm Including New Colour Coating As Per Direction Of Eicthe Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Length= 4 M , Width= 2.5 Mtrfinish- Matt Thickness- 4 Mm To 8 Mm.Length= 4 M , Width= 2.5 Mtrwaterproof : Yes 2 Supplying, And Installing Of Fibre Glass Made Modelwith High Quality Finish At Site With Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading Withthickness Of 4 Mm.Rate Should Be Included Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc . The Set Is A Molded Fiberglass And Resin With The Design Of The Traditional Staunton Style That Is Familiar To All Chess Players. The Artistry Of The Knight Makes That The Center Of Attention Of This Larger-Than-Life-Size Chess Set.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture.Specification:Material: Fiberglass ( Raw Materials: Fiber Sheets, Resin, Hardner, Fiber Chalk Etc ) 3 Model -Kanyashree ( Comprise With Three Girl Figure With A Cycle At1500 Mm Height ) 4 Model -Sabuj Sathi ( Comprise With Three Girl Figure 1500 Mm Height ) 5 Model -Chota Bheem ( Cartoon Character 1500 Mm Height ) 6 Model -Love Sign ( About 1800 Mm Height ) 7 Supplying, And Installing Of Fibre Reinforcedmade Combination Of Letter For Theword DighaAt Site With Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading With Suitable Thickness According To The Height 1800 Mm Rate Should Be Included Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc .The Colour Should Bemade As Per Direction Of Eic.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture.Height Of The Each Letter Not Less Than 1800 Mm 8 Manufacturing, Supplying, And Installing Fiber Composite Structures Of Decorative Gazebo ( Including False Celling ) Top Around The Periphery Of 4Nos. Structral Steel Of 200 Mmx200mm At Top Havinginternal Size. 3000 Mm X3000 Mmaround The Periphery In Square In Shape With Reinforced By 4 Mm Sq. Bar Covered By Glass Fiber Reinforced Polyester Or Vinyl Ester Resin Matrix, Approximately 50% Glass By Weight. A Synthetic Surface Veil Shall Be The Outermost Layer Covering The Exterior Surfaces. Glass Strand Roving’S Shall Be Used Internally For Longitudinal Strength Specially For Coastal Area. The Frp Having Density May Be Between 1, 2 G / Cm3 And 2, 0 G / Cm3 And Panels Are About 0.09 Inch In Thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, Water Absorption: = 0.2%, Synthetic Surface Veil Fabric Must Encase The Glass Reinforcementand Weigh About 12 Ounces Per Square Foot Depending On The Site Condition. All The Steel Column Surface And Other Exposed Surface Should Be Cover By Decorative “Frp” Laminates. The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.Relevant Construction And / Or Structural Drawings For All Frp Components Shall Be Submitted To The Eic For Approval In Accordance With The Requirements As Per This Specification.Frp Roof -Specification & Details Color : As Desired Material : Frpsize=3000 Mm X3000mmtype=Square In Shapeheight = 2400 Mm Projection From Outer Column Face=200 Mm ( Average ) Waterproof : Yes 9 Supplying, And Installing Of Fibre Glass Made Model Horse ( Style- Teracotta ) High Quality Finish At Site With Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading Withthickness Of 4 Mm.Rate Should Be Included Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc . The Set Is A Molded Fiberglass And Resin With The Design Of The Traditional Staunton Style That Is Familiar To All Chess Players. The Artistry Of The Knight Makes That The Center Of Attention Of This Larger-Than-Life-Size Chess Set.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture.Specification:Material: Fiberglass ( Raw Materials: Fiber Sheets, Resin, Hardner, Fiber Chalk Etc ) 10 Height = 2 Meter 11 Height = 1.5 Meter 12 Height = 0.8 Meter 13 Supplying, And Installing Of Frp Made Polished Sculpture Of Lord Buddha. The Style Of The Sitting Buddha In Varasana, Or Half Lotus Posethe Sculpture Need Attractive Finish Designs As Well As Beautiful Colorshade, Which Makes These Highly Preferred For Use In Park Areas.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Height Of The Lord Buddha 1500 Mm , Seating Over Half Lotus With Appropriate Shapematerial=Frp ( Fibre-Reinforced Plastic ) Waterproof : Yes 14 Supplying, And Installing Of Fibre Glass Made Mega Chess Piecesat Site With Fire Resistive Resin Coatingand Also Extra Strong Uv-4 Protected Against Fading With Suitable Thicknessand 300 Mm Dia Base.Rate Should Be Included Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc . The Set Is A Molded Fiberglass And Resin With The Design Of The Traditional Staunton Style That Is Familiar To All Chess Players. The Artistry Of The Knight Makes That The Center Of Attention Of This Larger-Than-Life-Size Chess Set.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture.Specificationdetails Given Below 15 King 1Black & 1 White Pieces- 1250 Mm Tall 16 Queen1black & 1 White Pieces- 1150 Mm Tall 17 Bishop2black & 2 White Pieces- 1000 Mm Tall 18 Knight2black & 2 White Pieces- 800 Mm Tall 19 Rook2black & 2 Whitepieces- 900 Mm Tall 20 Pawn8black & 8 Whitepieces- 700 Mm Tall 21 Supplying, And Installing Of Frp Made Different Shaped Model ( Pu Colour Coat ) At Site With Fire Resistive Resin Coating With Suitable Thickness And Also Suitably Placed On Frprockery With Pedestal. Rate Should Be Included Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc .The Frp Having Density May Be Between 1, 2 G / Cm3 And 2, 0 G / Cm3 Andabout 0.09 Inch In Thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, Water Absorption: = 0.2%The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic. 22 Shape Dear ( Size 1800 Mmx 1700 Mm ) 23 Shape Dear ( Size 1000 Mmx 1000 Mm ) 24 Shape Dear ( Size 800 Mmx 750 Mm ) 25 Shape Dear ( Size 550 Mmx 500 Mm ) 26 Shape Dragon ( Size 2300 Mmx 1500 Mm ) 27 Shapecartoon Decorative Statue ( Height =900 Mm ) 28 Shape Egret Bird 29 Model Dolphin ( 1200 Mm Length ) 30 Frpcovering Finishing Over Existing Model Masroom ( 3500 Mm Height With Top Dia 3000 Mm ) 31 Model Represent Unity Of Multiple Figure About 1.8 Mtr Height ( At New Digha ) 32 Manufacturing, Supplying, And Installing Of Concrete Chair 3 Seater With Arm Rest And Back Supportfor Outside Seating Painted With Spray Paint For Shiny Lookas Per This Specification.Each Bench Consists Of 2 Nos. L-Shape Base Support In Grey Cement Colour ( Thickness:80 Mm, Back Height:890 Mm, Front Height:450Mm, And Base Width:690Mm ) And 1 Nos. Reinforced Concrete Plank In Differentcolour Of Size 1500Mm X 400Mm X 50Mm, And 1 No. Of Reinforced Concrete Plank Indifferentcolour Of Size 1500Mm X 425Mm X 50Mm.Overall Dimensions: Seating Length Of The Bench:1500 Mm, Seating Height Of The Bench:450 Mm, Total Height Of The Bench:890 Mmmanufactured By Using M-30 Grade Of Concrete Using Vibro Compaction Process.Reinforced Suitably To Promote Long Use And To Prevent Damage During Handling, Transportation, & Erectionall Parts Are Joined Together With Galvanized Nuts & Bolts Of Suitable Size And All Bolts Are Sealed After Assemblybench Top And Back Planks Are Treated With Special Anti-Corrosive, Water Proof Coating So As To Make Surfaces Glossy And Water Proof.The Manufacturer / Supplier Shall Provide Full Details Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification.Material=Concretestyle = Gardensize=3 Seater ( Specified In Nomenclature ) Colour- As Per Desiredwaterproof : Yes 33 Manufacturing, Supplying, And Installing Fiber Composite Structures Of Decorative Gazebo Top Around The Periphery Of 8Nos. Concrete Column Of 200 Mm Dia At Top Having Internal Diameter. 1.950 Mm And Outer Cantilever Portion From Column Face About 200 Mm Around The Periphery In Octagonal In Shape With Reinforced By 4 Mm Sq. Bar Covered By Glass Fiber Reinforced Polyester Or Vinyl Ester Resin Matrix, Approximately 50% Glass By Weight. A Synthetic Surface Veil Shall Be The Outermost Layer Covering The Exterior Surfaces. Glass Strand Roving’S Shall Be Used Internally For Longitudinal Strength Specially For Coastal Area. The Frp Having Density May Be Between 1, 2 G / Cm3 And 2, 0 G / Cm3 And Panels Are About 0.09 Inch In Thickness, Fiber Mass Fraction 60-80%, Fiber Volume Fraction 50-60%, Water Absorption: = 0.2%, Synthetic Surface Veil Fabric Must Encase The Glass Reinforcementand Weigh About 12 Ounces Per Square Foot Depending On The Site Condition. All The Existing Column Surface And Other Exposed Surface Should Be Cover By Decorative “Frp” Laminates. The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.Relevant Construction And / Or Structural Drawings For All Frp Components Shall Be Submitted To The Eic For Approval In Accordance With The Requirements As Per This Specification.Frp Roof -Specification & Details Color : As Desired Material : Frpdia Of Structure=4900 Mmtype=Quadrilateral In Shape ( Inclined ) Height = 750 Mm Projection From Outer Column Face=200 Mm ( Average ) Waterproof : Yes 34 Manufacturing, Supplying, And Installing Of Garden Bench 3 Seater For Outside Seating With Cast Iron Leg Support Painted With Spray Paint For Shiny Lookand Seating Material Slats / Strips - 4Mm Thick And Strong Frp ( Fibre-Reinforced Plastic ) Is Strong And Durable Design To Take Load Up To 350 Kg. Distributed Across The Length.Relevant Construction And / Or Structural Drawingsshall Be Submitted To The Eic For Approval In Accordance With The Requirements As Per This Specification.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Dimension=69D X 160W X 88H Centimetersmaterial=Cast Iron, Frp ( Fibre-Reinforced Plastic ) Style = Gardensize=3 Seaterfurniture Finish= Natural Woodseat Height : 16 Inchesitem Weight : Not Less Than 55 Kgwaterproof : Yes 35 Supplyingfitting And Fixing Frp Finished 3D Wall Muralwith Matt Finish, The Thickness Of The Frp Workis Ranges Between 4 Mm To 8 Mm.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Material=Frp ( Fibre-Reinforced Plastic ) Finish- Matt Thickness- 4 Mm To 8 Mm.Length= 4 M , Width= 2.5 Mtrwaterproof : Yes 36 Supplying, And Installing Of Fibre Glass Made Decorative Big Artifical ( Maple ) Treeabout 3 Meter Height , Stem Dia Approx 600-750 Mm , Top Dia Approx -4 Meter With Sufficient Leaf For Attractionand It Also Highlighting 25-30 Nos Government Scheme Writing Over Circular Pvc Ball And Fitted On The Tree Including Electrial Lighting Work Complete In All Respect .Its Need Attractive Finish Designs As Well As Beautiful Color Combinations Which Makes These Highly Preferred For Use In Park Areas.Rate Should Be Included Included All Structural Framing Work By Iron Angle, Plate, Nut And Screw, Welding Work Etc .The Manufacturer / Supplier Shall Provide Full Details Of The Fiberglass Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost.Plant Type-Artificial Hand Madesupply Of Pvc Ball - 25- 30 Nos ( Mentioning Govt Scheme Nameeach ) Type-Artificial Plants ( Maple Tree ) Material=Fiberglass Size=Custom Design, Height 3 Meter, Stem Dia-750 Mmcolour= Multi Colourusage / Application-Outdoorstructure-Steel Frame Work Covered With Frpshape-Maple Tree Waterproof : Yes 37 Supplying, And Installing Of Frp Maderevolving Kids Merry Go Roundcustomized With Ms Pillar Material With Frp Ladder Material For Age Group Of 4 To 12 Yearswith Capacity Of 4 Nos Children .Its Need Attractive Finish Designs As Well As Beautiful Color Combinations With Ms Pillar Materialpowder Coating And Body Paint Withwith Pu Painthighly Preferred For Use In Park Areas.The Manufacturer / Supplier Shall Provide Full Details Of The Drawing ( Plan / Elevation / Side Elevation ) Of The Structurewith All Necessary Dimension Including All Necessaryphotosfrom Different Angle At The Time Of Bid Submission. The Manufacturer / Supplier Shall Provide Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners As And When Asked By The Eic.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Features=Kids Merry Go Roundcolor=All Colour Availabletype=Outdoor Play Stationcapacity= Group Of 4 Nos Childrensafe Play Area=2.0X 2.0 Mdeck Shape=Circleslide Materia=Frp Body Structure=Ms ( Steel Components All Powder Coated With Anticorrosion Treatment ) Pillar Material=Ms With Powder Coatedmetal Coating=Powder Coatingwaterproof : Yes 38 Supplying, And Installing Of Girrape Shape Frp Made Plain Slide Senior ( Length=6M , Height=2 M ) Suitable For 3 To 10 Years Children Havingspecified Dimensionfitted With Ms Ladder Material .Its Need Attractive Finish Designs As Well As Beautiful Color Combinations Which Makes These Highly Preferred For Use In Park Areas.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Platform Height=1800-2000 Mmlength=6.00 Mtr ( Approximately ) Body Material=Frp Ladder Material=Ms ( Steel Components All Powder Coated With Anticorrosion Treatment ) Colour= As Desierd By Eic Usage / Application-Outdoorwaterproof : Yes 39 Supplying, And Installing Of Frp Made Fibre Circular Swing Forage Group Of 3 To 10 Years Children Customized With Ms Pillar Material Or Frame Work Havingspecified Dimension. Its Need Attractive Finish Designs As Well As Beautiful Color Combinations Which Makes These Highly Preferred For Use In Park Areas.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Body Material=Frp Supportingmaterial=Ms ( Steel Components All Powder Coated With Frptreatment ) Colour= As Desierd By Eic Usage / Application-Outdoorwaterproof : Yes 40 Supplying, And Installing Of Frp Made Double See Saw Suitable Forage Group Of 3 To 10 Years Children Customized With Ms Pillar Material Or Frame Work Havingspecified Dimension. Its Need Attractive Finish Designs As Well As Beautiful Color Combinations Which Makes These Highly Preferred For Use In Park Areas.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Body Material=Frp Supportingmaterial=Ms ( Steel Components All Powder Coated With Anticorrosion Treatment ) Colour= As Desierd By Eic Usage / Application-Outdoorwaterproof : Yes 41 Supplying, And Installing Of Frp Made Single See Saw Suitable Forage Group Of 3 To 10 Years Children Customized With Ms Pillar Material Or Frame Work Havingspecified Dimension. Its Need Attractive Finish Designs As Well As Beautiful Color Combinations Which Makes These Highly Preferred For Use In Park Areas.The Manufacturer / Supplier Shall Provide Full Details Of The Frp Materials, Including All Associated Manufacturing Processes, Test Certificates, Adhesive, And Fasteners.The Manufacturer / Supplier Shall Responsible For All Labour, Materials, Equipment, Carriageand All Other Incidentalscost Governed By This Specification To Manufacture The Frp Components In Accordance With Any Structural Drawings Provided By The Eic.Body Material=Frp Supportingmaterial=Ms ( Steel Components All Powder Coated With Anticorrosion Treatment ) Colour= As Desierd By Eic Usage / Application-Outdoorwaterproof : Yes
