Kerala Water Authority-KWA has published Eposit Work Kepco - Twss - 2021-22 - Providing A New Non Domestic Connection To Kepco Unit At Pettah From 400Mm Premo Pipe Using Fabricated Ms Tee Joint.. Submission Date for this Tender is 04-03-2022. Water Supply Project Tenders in Thiruvananthapuram Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Fabrication of Barrel suitable for 400mm Premo line |
2 | Fabricating MS pipes of size 500mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting thesteel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. |
3 | Fabricating MS flanges of diameter 500 mm using 16 mm thick MS plateincluding cost and conveyance charges of MS plate, all fabrication charges, charges of painting thesteel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. |
4 | Cutting 500 mm (ID) MS pipes for making bends and other specialsby gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
5 | Welding500 mm (ID) MS pipes for making bends and other specialsby gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
6 | Grinding cut and weld edges of 450 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
7 | Grinding cut and weld edges of 500 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
8 | Fabricating MS pipes of size 150mm (ID) using 8 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting thesteel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. |
9 | Fabricating MS flanges of diameter 150 mm using 12 mm thick MS plateincluding cost and conveyance charges of MS plate, all fabrication charges, charges of painting thesteel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. |
10 | Cutting 150mm (ID)MS pipes for making bends and other specialsby gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
11 | Welding150mm (ID) MS pipes for making bends and other specialsby gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
12 | Grinding cut and weld edges of 150mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. |
13 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc.(the tail pieces if required will be paid separately):150 mm diameter |
14 | Supplying M.S Bolt and Nut 5/8" |
15 | Rubber Beading |
16 | Lighting provision for night works |
17 | IR Sheet for leak works |
18 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
20 | Reinforced cement concrete 1:2:4 using 20mm metal including watering, curing, hire charges of form work, centering and shuttering for valve chamber and including the cost of cement 320 kg /m3 and excluding cost of reinforcement |
21 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars |
22 | 12 mm cement plaster finished with a floating coat of neat cement of mix: |
23 | Providing and fixing in position industrial type pressure gauges with gun metal/brass valves in pipe lines including all specials etc complete as required DSR1416.8 |
24 | Taking connection from the existing main (double boring), supplying and fitting 25mm saddlepiece, boring the main, supplying and fitting 25mm brass ferrule 1no, 25mm GM full way wheel valve1no, including all specials and connecting the newly laid main, testing the joints etc.complete but excluding cost of pipe |
25 | Conveying CI MH cover with frame from the deptl store to site and placing in position etc. complete |
26 | Supplying 560 mm dia MH cover with frame (Heavy duty) |
27 | Supply of 25mm ASTM Pipe |
28 | 25mm ASTM Coupler |
29 | Supply of 25mm ASTM elbow |
30 | New non domestic connection fee etc. |
31 | Cost of 25mm B-Class ISI water meter |
32 | Connection charges including Plan charges, cost of forms, Connection fee etc Non Domestic Connection |
33 | Providing and fixing Surface box for water meter |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail