Athirappilly Gp 2021-22_Sholayar St Colony Drinking Water Scheme ( Proj. No.139 / 22 ) Sholayar St Colony Drinking Water Scheme
Tender Value
13 Lakhs
Estimated cost
Bid Submission
05 Mar 2022
0 days left
EMD
32550
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
athirappilly → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Athirappilly Gp 2021-22_Sholayar St Colony Drinking Water Scheme ( Proj. No.139 / 22 ) Sholayar St Colony Drinking Water Scheme
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Bore Well |
| 2 | od1627048/2021_2022 : Selection of a suitable site for drilling borewell after hydrological and geophysical investigation. |
| 3 | od1627068/2021_2022 : Drilling 150mm dia borewell suitable to accommodate well pipe (PVC) of varying depth below ground level having an overburden 25m or more in all classes of soil and rock inclusive of all charges of machinery and accessories, conveying and lowering casing pipes, etc complete excluding the cost of the casing pipe. |
| 4 | od1627071/2021_2022 : Supplying and fixing 180mm dia PVC casing pipe 8kgf/cm2 including all cost of labour, conveyance, material, etc. complete. |
| 5 | od1627072/2021_2022 : Supplying and fixing 180mm dia PVC well cap including all cost of labour, conveyance, material, etc complete. |
| 6 | od1627076/2021_2022 : Provision for water quality test. |
| 7 | od1627077/2021_2022 : Provision for Yield Test |
| 8 | Construction of RCC OH Tank |
| 9 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 10 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 11 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 12 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 13 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 14 | 5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 15 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 16 | 5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide |
| 17 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 18 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 19 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 20 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). |
| 21 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 22 | 51.13.21.1 : Water proof plasteringwith Cement Mortar 1:4 (1 cement : 4 fine sand) 12mm thick plaster finished with a floating coat of neat cement mixed with water proofing compound of approved make@ 2kg/m2 of mix floated hard and troweled smooth including all labour, material, conveyancecharges etc complete. |
| 23 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 24 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 25 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 26 | 13.71 : Lettering with black Japan pint of approved brand and manufacture |
| 27 | od1652707/2021_2022 : Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement, testing of joints complete as per direction of Engineer in Charge. 75mm dia 10kgf/cm2 [Modified 50.18.9.8.1] |
| 28 | od1652706/2021_2022 : Supplying and fixing 75mm PVC ball valve including labour, materials, conveyance charges, etc complete as per the direction of Engineer in-charge. |
| 29 | Pump House |
| 30 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 31 | 60.7.1 : DRYRUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 32 | 50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 33 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 34 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 35 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 36 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 37 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 38 | 10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 39 | od1652648/2021_2022 : Supplying65mm pad lock (6 lever) including all cost etc complete |
| 40 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 41 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 42 | Pipe Laying |
| 43 | od1627292/2021_2022 : Excavation trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottom, depth up to 1.5m including getting out the excavated soil,and then returning the soil and required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming watering etc. and depositing of surplus excavated soil as directed within a lead of 50m, All kind of soil for pipes, cables etc. |
| 44 | od1627294/2021_2022 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, testing of joints complete as per direction of Engineer in Charge. 32mm dia 10kgf/cm2 [Modified 50.18.9.4.1] |
| 45 | od1627296/2021_2022 : Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement, testing of joints complete as per direction of Engineer in Charge 50 mm dia 10Kgf/cm2 [modified 50.18.9.6.1] |
| 46 | od1652705/2021_2022 : Supplying and fixing 50mm PVC ball valve including labour, materials, conveyance charges, etc complete as per the direction of Engineer in-charge |
| 47 | od1627299/2021_2022 : Supplying and fixing 75mm PVC (4kgf/cm2) pipe as stand-post filled with cement concrete. |
| 48 | 50.18.9.12.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall |
| 49 | 18.54.2 : Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122 mm long, weighing not less than 99 gms |
AI Tender Summary
Tender Timeline
Feb 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedMar 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender