|
| 1 | Sch \"A\" Part-I B/R work:-Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | M&L for joint free non skid ceramic tiles \" coloured\" 7 to 8mm thick ( Square/rectangular ) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc.setand jointed in neat cement slurry and pointed in white cement including laid over 15mm thick screed bed in CM 1:4complete all as specified |
| 3 | M&L for Glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles including laid over backing coat of 10mm thick of cement mortar 1:4 all as specified and directed. |
| 4 | Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets |
| 5 | Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work |
| 6 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side withdecorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls |
| 7 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side withdecorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling |
| 8 | M&L for 2nd class soft wood Plain fillets.sec area exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads. |
| 9 | All as per srl item No. 8 here-in-before butsectional area n.exc 3 sq cm bull nosed, splayed, chamfered or rounded on one edge or face |
| 10 | Demolation of brickwork or stone/boulder masonry, built in cement mortor including all quins, arches pillars, etc, but excluding ashlar facings dressed stonework and precast concrete articles. |
| 11 | M&L for pre-cast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate ) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6,and set as in wall etc |
| 12 | Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each(without taking off shutters from the frames) |
| 13 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) |
| 14 | M&L for 2nd class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 15 | M&L for 2nd class softwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors. |
| 16 | M&L for 2nd class softwood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. devided in squares in plain, chamfered or rounded. mittered and rebated with sash bars and providing in windows, ventilators and stiles and rails etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a). |
| 17 | S&F 3mm thk sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq.m in each pane |
| 18 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy. |
| 19 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section |
| 20 | S&F 100mm long aluminium anodised, barrel tower bolts of extruded section |
| 21 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel |
| 22 | S&F 75mm long butt hinges, medium weight, cold rolled mild steel |
| 23 | S&F 150mm long extruded aluminium alloy handles, fabricated type \"D\" , anodised |
| 24 | S&F 100mm long extruded aluminium alloy handles, fabricated type \"D\" , anodised |
| 25 | M&L for preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 26 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall |
| 27 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 28 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 29 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for. |
| 30 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushedstone aggregate in plinth protection including provision of necessary form work finishing the exposed surface even and smooth complete all as specified. |
| 31 | Dismantling water tanksExc 500 & n.exc 1000 litres capacity |
| 32 | S & F rotational moulded polythene, two layers, water storage tank 1000Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including minor repairing &20mmflot ball brass valves high pressure with polythene float and flynut complete,Aluminium rod & high-density plastic ball screwed for iron pipe complete all as specified and dirtected by Engr-in-Charge . |
| 33 | S&F 20mm dia nipple suitable for HDPE water tank. (Minimum weight 20mm-45gms) |
| 34 | Taking up/down 15mm bore oldtubingon walls and connection of size 15mm bore complete all as specified and as directed |
| 35 | Taking up/down 20mm bore oldtubingon walls and connection of size 15mm bore complete all as specified and as directed |
| 36 | S&F 15mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F 20mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 40 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. |
| 41 | M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge .. |
| 42 | Rendering 10 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge. |
| 43 | M&L for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed by Engr-in-Charge .. |
| 44 | Rendering 15mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 mixing with WPC @2% by weight of cement or as per manufacturer instruction and finished even and smooth without using extra cement.complete all as specified and directed by Engr-in-Charge.Note:WPC will be measured and paid sepratly. |
| 45 | Supply only water proofing compound. |
| 46 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge .. |
| 47 | Sch \"A\" Part-II E/M work:-Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. |
| 48 | M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover complete all as specified for the following:- Make of cable: Finolex/Polycab/Havells/Plaza.(a)One light /fan/bell point/buzzer point exhaust fan controlled by one nos, one way 5/6 Amps switch. |
| 49 | One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size |
| 50 | One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size |
| 51 | All as per srl item No 50 here-in-before but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable. |
| 52 | S&F Socket outlet multipurpose 2 in 1, 3 pin, 5 and 15 amp flush type |
| 53 | S&F Socket outlet multipurpose 3 pin, 5A, and 2 pin 5A flush type |
| 54 | S&F Switch piano, flush type single pole, one way 5 Amp |
| 55 | S&F Switch piano, flush type single pole, one way 15 Amp |
| 56 | S&F Ceiling rose 65x50mm, 2 to 3 terminal PVC/polycarbonate, isolated body |
| 57 | S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 58 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size |
| 59 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m |
| 60 | S&F sheet metal powder coated versatile double door SPN distribution board,12 way suitable for MCB\"s fitted with copper bus bar rated 200amps, neutrallink , earth bar and din rail suitable for use on 240 Volt, 50Hz . |
| 61 | S&F MCB SPN 63 Amp 240 volt AC with 10KA breaking capacity of \"C\" series in distribution boards all as specified and directed. |
| 62 | S&F MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of \"C\" series in distribution boards all as specified and directed. |
| 63 | S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 16 Sqmm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular all as specified and as directed. |
| 64 | Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion |
| 65 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 67,735.00 and any other reduction if any from quoted amount. |